Anchor roller

[drb1025]

When I went to grease the anchor roller, I noticed the two screws that hold the axle had vibrated loose, one was about a half turn from falling out. Hopefully some thread lock will prevent that from recurring. So just a reminder that we need to check everything periodically, even those screws we usually never think about coming loose.

 

[HopCar]

Drb, you are correct about the screws but your anchor is too small, it's the wrong kind and you have too much or too little chain?

 

[Al]

Yep, and grind off some medal and add a tag line.
Al

 

[FlyWright]

At least you caught yours before it fell out. Found a great temp replacement in my spare parts to get me through the trip before buying a few perfect SS replacements at the hardware store. I used Locktite to prevent a recurrence and haven't had a problem since.

 

[High Wire]

Your point is dull and the coating is defective.