wwestman
Senior Member
- Joined
- Apr 20, 2015
- Messages
- 395
- Location
- USA
- Vessel Name
- Excellent Adventure
- Vessel Make
- 1995 Jefferson Ker Shine 45
Our new to us boat has a water tank gauge on the lower helm. It lights up but the needle does not move. The top of the tank has a sending unit.
Knowing absolutely nothing about how these things work can someone give me some insight in how to go about checking the sending unit, the wiring and the gauge to see where the problem is. There is a sight tube on the side so I can see what level the tank is at but that requires lifting the master bed up and moving it aside, not real easy. I would rather have a working gauge.
Any ideas or suggestions?
Thanks
Knowing absolutely nothing about how these things work can someone give me some insight in how to go about checking the sending unit, the wiring and the gauge to see where the problem is. There is a sight tube on the side so I can see what level the tank is at but that requires lifting the master bed up and moving it aside, not real easy. I would rather have a working gauge.
Any ideas or suggestions?
Thanks