Reply
 
Thread Tools Search this Thread Display Modes
 
Old 06-01-2015, 12:32 PM   #1
Guru
 
CaptTom's Avatar
 
City: Southern Maine
Vessel Model: Prairie 36 Coastal Cruiser
Join Date: Dec 2012
Posts: 2,717
Testing Autopilot

I tried this on another forum, with no takers.

My boat came "equipped" with the Unipass linear actuator below, neatly wired into the black box shown, with a cable from the box leading...nowhere.

The "head" unit for the autopilot had been removed a long time ago.

Does anyone have access to any manuals on this unit? Or just:

1) How to test the actuator to see if it still works?
2) Is it even possible to connect a new "head" to this old unit?



CaptTom is online now   Reply With Quote
Old 06-01-2015, 02:05 PM   #2
Guru
 
Capt.Bill11's Avatar
 
City: Sarasota/Ft. Lauderdale
Join Date: Apr 2014
Posts: 5,438
You should be able to send power to the ram and make it go in and out.
Capt.Bill11 is offline   Reply With Quote
Old 06-01-2015, 02:38 PM   #3
TF Site Team
 
Larry M's Avatar
 
City: Jacksonville
Join Date: Nov 2008
Posts: 11,682
This ram should be in a museum. Only kidding. From what I can tell Unipas was based in Warwick, RI and went out business sometime in the late 70's (maybe)? I'd call ComNav or W-H Autopilots. Both of these small companies were around then and their products sometimes interfaced with the competitors.
Larry M is online now   Reply With Quote
Old 06-01-2015, 04:48 PM   #4
Guru
 
CaptTom's Avatar
 
City: Southern Maine
Vessel Model: Prairie 36 Coastal Cruiser
Join Date: Dec 2012
Posts: 2,717
Quote:
Originally Posted by Capt.Bill11 View Post
You should be able to send power to the ram and make it go in and out.
My thoughts exactly. But all I have are colored wires attached to numbered screws. I was thinking maybe someone might have a clue which wires to power up to make it move each way.

Quote:
Originally Posted by Larry M View Post
This ram should be in a museum. Only kidding. From what I can tell Unipas was based in Warwick, RI and went out business sometime in the late 70's (maybe)? I'd call ComNav or W-H Autopilots. Both of these small companies were around then and their products sometimes interfaced with the competitors.
That might not be a bad idea; find someone old enough to remember. Still, if they're that old, their memory might be even worse than mine

The ideal would be a wiring diagram or schematic or something like that.
CaptTom is online now   Reply With Quote
Old 06-01-2015, 06:04 PM   #5
Guru
 
High Wire's Avatar
 
City: Cape May, NJ
Vessel Name: Irish Lady
Vessel Model: Monk 36
Join Date: Dec 2007
Posts: 4,964
An electric ram? Wow! If you can take off the black box cover and take a couple photos of whats inside and the back side of the cover. that said, IMHO, its eBay fodder.
__________________
Archie
Irish Lady
1984 Monk 36 Hull #46
Currently in Cape May, NJ
High Wire is offline   Reply With Quote
Old 06-02-2015, 05:48 AM   #6
FF
Guru
 
FF's Avatar
 
Join Date: Oct 2007
Posts: 22,553
"An electric ram? Wow!"

Electric rams , mounted outside in the weather are the norm for tiller steered boats today.

It is an excellent low cost method of steering , that can be stowed below when desired.

Depending on the load on the system it might work for a trawler .

How to disconnect during manual steering would be the question.

A longer tiller arm would make the system stronger , at the expense of correction ,speed, usually not a problem.
FF is offline   Reply With Quote
Old 06-02-2015, 06:56 AM   #7
Guru
 
CaptTom's Avatar
 
City: Southern Maine
Vessel Model: Prairie 36 Coastal Cruiser
Join Date: Dec 2012
Posts: 2,717
Quote:
Originally Posted by Larry M View Post
This ram should be in a museum.
It IS in a museum. My boat!

But here's the thing; it's already all hooked up in series with the normal (hydraulic) steering ram. I can't remove it without re-configuring the whole system. IF I could get it working, I might have one less component to buy (two, if you count the hydraulic pump) to get a functioning autopilot.

Sounds like I'm on my own with this one. I'll take off the cover of the "black box" and see if I get any clues from that. Failing that, I can take a guess on what the various colors mean, and just try to power up the ram with jumper wires.
CaptTom is online now   Reply With Quote
Old 06-02-2015, 10:13 AM   #8
Guru
 
Capt.Bill11's Avatar
 
City: Sarasota/Ft. Lauderdale
Join Date: Apr 2014
Posts: 5,438
ComNav Marine Ltd. - ComNav Marine Autopilot Systems Upgrades

http://forums.catalina.sailboatowner...d.php?t=102849

There is a guy in the above thread who claims to have a manual for it. You should check and see if he is still around.
Capt.Bill11 is offline   Reply With Quote
Old 09-27-2015, 11:58 PM   #9
Newbie
 
City: Acworth, GA
Join Date: Sep 2015
Posts: 1
I have a Unipas manual, email me fitzgerrell at yahoo dot com if you still need. You can update with a Comnav if the servo still works. You can remove and replace with a rod of equivalent length if you just want to tidy up.
fitzgerrell is offline   Reply With Quote
Old 09-28-2015, 01:25 AM   #10
Guru
 
Xsbank's Avatar
 
City: Pender Harbour, BC
Vessel Name: Gwaii Haanas
Vessel Model: Custom Aluminum 52
Join Date: Sep 2013
Posts: 3,791
I have Comnav and it's very good.
__________________
Don't believe everything that you think.
Xsbank is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


» Trawler Port Captains
Port Captains are TF volunteers who can serve as local guides or assist with local arrangements and information. Search below to locate Port Captains near your destination. To learn more about this program read here: TF Port Captain Program





All times are GMT -5. The time now is 04:54 PM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2006 - 2012