Reply
 
Thread Tools Search this Thread Display Modes
 
Old 02-12-2017, 05:27 PM   #1
Guru
 
menzies's Avatar
 
City: Jacksonville
Country: USA
Vessel Name: SONAS
Vessel Model: Grand Alaskan 53
Join Date: May 2014
Posts: 4,519
OK Forum Electronics Experts

I installed two cameras today - one in the ER and over the stern. I have successfully fed them to the Green Marine 17" Monitor in the PH and they show fine - great in fact.

This monitor is replicated on the FB with the 15" "dumb" monitor - i.e. with no controls. This monitor has been working fine. However when I finished the install and went up there to see the video replicated there was a fixed message on the screen saying "Out Of Timing."

I am stumped on this.

One thing I am going to look at tomorrow is that I set the resolution on the PH monitor to match the resolution I had on the cameras (1280X1024) which that monitor can handle, but the max resolution on the FB monitor is 1024x768.

So I will lower both the camera and the PH monitor to 1024X768 and see if that resolves it.

I am not hopeful though as I wouldn't think a bad resolution would give an "out of timing" message would it?
__________________
Advertisement

menzies is offline   Reply With Quote
Old 02-12-2017, 06:26 PM   #2
Guru
 
twistedtree's Avatar
 
City: Gloucester, MA
Country: USA
Join Date: Jan 2013
Posts: 4,879
How is the monitor "replicated" between the two stations?
__________________

__________________
www.MVTanglewood.com
twistedtree is offline   Reply With Quote
Old 02-12-2017, 06:34 PM   #3
Guru
 
Lou_tribal's Avatar
 
City: Quebec
Country: Canada
Vessel Name: Bleuvet
Vessel Model: Custom Built
Join Date: Jan 2016
Posts: 3,483
Refresh rate from you camera is not supported by your screen. Lower the refresh rate (frequency) from your cam or select a matching one to match the supported one on your screen.
Lou_tribal is online now   Reply With Quote
Old 02-12-2017, 07:23 PM   #4
Guru
 
menzies's Avatar
 
City: Jacksonville
Country: USA
Vessel Name: SONAS
Vessel Model: Grand Alaskan 53
Join Date: May 2014
Posts: 4,519
Quote:
Originally Posted by twistedtree View Post
How is the monitor "replicated" between the two stations?
No idea right now. I would have to lift out the embedded PH and FB monitors to look at the wiring but want to leave doing that until I have exhausted all other options.
menzies is offline   Reply With Quote
Old 02-12-2017, 07:30 PM   #5
Guru
 
twistedtree's Avatar
 
City: Gloucester, MA
Country: USA
Join Date: Jan 2013
Posts: 4,879
Quote:
Originally Posted by menzies View Post
No idea right now. I would have to lift out the embedded PH and FB monitors to look at the wiring but want to leave doing that until I have exhausted all other options.
Right, don't take anything apart. I'm just curious how it works.
__________________
www.MVTanglewood.com
twistedtree is offline   Reply With Quote
Old 02-12-2017, 07:34 PM   #6
Enigma
 
RT Firefly's Avatar
 
City: Slicker?
Country: Bumpkin?
Join Date: Oct 2007
Posts: 12,600
Greetings,
Mr. m. Get those new batteries yet?
__________________
RTF
RT Firefly is offline   Reply With Quote
Old 02-12-2017, 08:54 PM   #7
Guru
 
menzies's Avatar
 
City: Jacksonville
Country: USA
Vessel Name: SONAS
Vessel Model: Grand Alaskan 53
Join Date: May 2014
Posts: 4,519
Quote:
Originally Posted by RT Firefly View Post
Greetings,
Mr. m. Get those new batteries yet?
No, probably Tuesday if I can get this sorted out tomorrow.
menzies is offline   Reply With Quote
Old 02-12-2017, 09:04 PM   #8
Enigma
 
RT Firefly's Avatar
 
City: Slicker?
Country: Bumpkin?
Join Date: Oct 2007
Posts: 12,600
__________________
RTF
RT Firefly is offline   Reply With Quote
Old 02-13-2017, 10:24 AM   #9
Guru
 
City: kemah
Country: USA
Join Date: May 2015
Posts: 1,135
Quote:
Originally Posted by menzies View Post
So I will lower both the camera and the PH monitor to 1024X768 and see if that resolves it.

I am not hopeful though as I wouldn't think a bad resolution would give an "out of timing" message would it?
Yup all 3 have to match display timing.
what_barnacles is offline   Reply With Quote
Old 02-15-2017, 07:05 AM   #10
Guru
 
menzies's Avatar
 
City: Jacksonville
Country: USA
Vessel Name: SONAS
Vessel Model: Grand Alaskan 53
Join Date: May 2014
Posts: 4,519
Quote:
Originally Posted by what_barnacles View Post
Yup all 3 have to match display timing.
Yes, that worked.
menzies is offline   Reply With Quote
Old 02-15-2017, 10:58 AM   #11
Guru
 
N4712's Avatar
 
City: South FL
Country: U.S.A
Vessel Name: Oliver
Vessel Model: Nordhavn 47 Hull# 12
Join Date: Apr 2013
Posts: 3,607
Quote:
Originally Posted by menzies View Post
No idea right now. I would have to lift out the embedded PH and FB monitors to look at the wiring but want to leave doing that until I have exhausted all other options.
Me-Thinks if you have an active signal splitter (you may or may not) maybe the cable that goes to the FB got unplugged or maybe it broke? Just a shot in the dark though, does the PH display nothing also? Edit- Just saw the PH works.
__________________

__________________
Thanks, Oliver
M/V Oliver
Nordhavn 47 Hull #12
N4712 is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off





All times are GMT -5. The time now is 03:08 PM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2006 - 2012
×