Marine grade wire crimpers and terminals.

[Alan W Waters]

Here is some good information about crimpers and terminals and other marine related subject.
Welcome To MarineHowTo.com Photo Gallery by Compass Marine How To at pbase.com

 

[C lectric]

Agree, strongly.

 

[dhays]

Here is some good information about crimpers and terminals and other marine related subject.
Welcome To MarineHowTo.com Photo Gallery by Compass Marine How To at pbase.com

He is full of some incredibly helpful advice and information. If I am not mistaken, he occasionally posts here as "CMS". To me, he will always be
"Maine Sail"

 

[Crusty Chief]

Looks like a great site, thanks for the link.
Are You affiliated with it?

 

[TONTOROSS]

Nofwal my head hurts!!!

 

[Alan W Waters]

Looks like a great site, thanks for the link.
Are You affiliated with it?

No affiliation.

 

[Ex Sailor]

Great site ! thanks for sharing.

Re: crimpers, being in the electrical trade, I have become fond and always used the T&B crimpers specifically the one(s) that put a dimple into the connector as opposed to just flattening it out .......

my .02 CAD .... Frank B.

 

[C lectric]

I too use the T&B crimper but if you are using heat shrink clad terminals that dimpler will puncture the heat shrink clad defeating the heat shrink seal.

That tool is fine for non heat shrink terminals which can have a separate piece of heat shrink added.