|
03-18-2011, 10:43 PM
|
#1
|
Guru
Join Date: Jan 2011
Posts: 622
|
blue sea part ?
what is this?
recently noticed this unit as part of my battery system but have no idea of its purpose?
|
|
|
03-18-2011, 11:14 PM
|
#2
|
Master and Commander
City: Vallejo CA
Vessel Name: Carquinez Coot
Vessel Model: penultimate Seahorse Marine Coot hull #6
Join Date: Sep 2010
Posts: 12,559
|
RE: blue sea part ?
|
|
|
03-21-2011, 10:38 AM
|
#3
|
Guru
Join Date: Jan 2011
Posts: 622
|
RE: blue sea part ?
that would be too easy, and then i would miss out of all really good information coming from experienced boatowners..
|
|
|
03-27-2011, 05:26 AM
|
#4
|
Guru
City: Tuckerton, NJ
Vessel Name: WIRELESS ONE
Vessel Model: 36 Gulstar MarkII
Join Date: Mar 2011
Posts: 938
|
blue sea part ?
That is a BlueSea ACR, Automatic charge relay. They are an excellent addition and used to charge one battery bank from another battery bank once the primary bank is fully charged. If you have the remote switch you can turn the unit off, leave it in auto charge mode or force the unit to combine both battery banks. I wouldn't recommend trying to start engines with it in parallel mode if the starting bank is almost dead (if you have the remote switch set to "ON".
Bill
-- Edited by Billylll on Sunday 27th of March 2011 06:27:25 AM
|
|
|
03-28-2011, 03:42 AM
|
#5
|
Guru
Join Date: Oct 2007
Posts: 22,553
|
RE: blue sea part ?
"I wouldn't recommend trying to start engines with it in parallel mode if the starting bank is almost dead"
No problem,
If the almost dead house bank were connected AT start , there would be no bad results.
Many large starters will drag the start voltage down to 10V while cranking and "dead " house batts are seldom below 11.5V , if there not being discarded.
Dead house connected to starts long term,much ungood!
|
|
|
03-28-2011, 02:13 PM
|
#6
|
Guru
City: Tuckerton, NJ
Vessel Name: WIRELESS ONE
Vessel Model: 36 Gulstar MarkII
Join Date: Mar 2011
Posts: 938
|
RE: blue sea part ?
I wouldn't recommend it with the above shown unit and wire size unless your starting a smaller gas engine or outboard motor.
The poster has the SI series which can only take 250 amps for 5 minutes.
Here is a link to the SI specifications
http://bluesea.com/category/2/productline/overview/387
I use the ML series with 4/0 cabling I can take 2200 amps for 10 seconds of cranking or 500 amps continous.
Here is the link to the ML series.
http://bluesea.com/category/2/productline/388
Bill
|
|
|
04-27-2011, 12:00 PM
|
#7
|
Guru
Join Date: Jan 2011
Posts: 622
|
RE: blue sea part ?
Billy,
the amps you are referring to is not starting amps, it is charging amps.
starting amps does not go thru this switch.
basically what this switch does is combine two banks when charging current is available. When there is a discharge, the switch disconnects.
So if you have two banks, this switch will combine the banks for charging only.
|
|
|
04-29-2011, 04:22 AM
|
#8
|
Guru
Join Date: Oct 2007
Posts: 22,553
|
RE: blue sea part ?
"So if you have two banks, this switch will combine the banks for charging only."
Its the yachtty version of an $18. dollar RV solenoid and std car key switch.
Yachtty priced too,,,and far more complex to trouble shoot for extra yachting fun!
|
|
|
|
Thread Tools |
Search this Thread |
|
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Trawler Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
All times are GMT -5. The time now is 01:52 AM.