Reply
 
Thread Tools Search this Thread Display Modes
 
Old 12-09-2019, 07:00 PM   #1
Senior Member
 
City: Rocky Point
Vessel Name: Livin The Dream
Vessel Model: Sea Ray
Join Date: Nov 2017
Posts: 218
Inverter Question

I picked up a xantrex 458 inverter 2000 watt. I really just want to run the fridge and make a cup of coffee without have to start the genset. I have 50amp shore power coming in will it have any effect on the charger on the inverter?
larman is offline   Reply With Quote
Old 12-09-2019, 08:54 PM   #2
Valued Technical Contributor
 
DavidM's Avatar
 
City: Litchfield, Ct
Join Date: Aug 2012
Posts: 6,786
You need to wire one leg of the 220v/110v shorepower through the inverter’s transfer switch. It needs to be the leg that supplies the fridge and coffee maker outlets.

That way if shorepower is available it will pass through to that leg and if also a charger, will charge the batteries. If no shorepower then the inverter will supply that leg.

David
DavidM is offline   Reply With Quote
Old 12-09-2019, 10:01 PM   #3
Guru
 
tiltrider1's Avatar
 
City: Seattle
Vessel Name: AZZURRA
Vessel Model: Ocean Alexander 54
Join Date: Aug 2017
Posts: 4,309
Inverter doesn’t care if it’s 30a or 50a coming in. It will take up to 17 amps and either pass it on or send it to the battery depending on loads and needs. Only add the necessary circuits to the inverter the rest of the circuits stay the same.
tiltrider1 is online now   Reply With Quote
Old 12-10-2019, 05:35 AM   #4
Valued Technical Contributor
 
DavidM's Avatar
 
City: Litchfield, Ct
Join Date: Aug 2012
Posts: 6,786
When larman said he had 50 amp shorepower, 95% of the time that means 50A/220/110V which is a four wire system with two hot legs of 110 to neutral, a neutral and a ground all providing 220V between the two hot legs.

A single 110V inverter (unless it is a two leg 220V one) can't handle two legs of 220V but it can handle one of the 110V legs. Amost all boats with 50A/220/110 power split the legs and feed two separate 110V busses on the main electrical panel. You just take one of those 110V legs that go to the panel, reroute it to the inverter's transfer switch and then feed the 110V inverter output back to the panel.

One caveat is that most 110V inverters have a 30A rated transfer switch. There should be a master breaker on the main panel for each leg. If it is 50A then replace it with a 30A one to protect the transfer switch from excessive current. That may limit what you can power from that leg. There is a solution but it gets too complicated to discuss here.

But if the OP isn't entirely comfortable with AC wiring, get a marine electrician to do it for you and determine exactly what kind of AC system you have.

David
DavidM is offline   Reply With Quote
Old 12-10-2019, 05:53 AM   #5
Guru
 
psneeld's Avatar
 
City: Ft Pierce
Vessel Name: Sold
Vessel Model: Was an Albin/PSN 40
Join Date: Oct 2011
Posts: 28,149
Or run a sub panel.

Have one main panel breaker off one leg/buss feeding the inverter that feeds the sub panel.
psneeld is offline   Reply With Quote
Old 12-10-2019, 07:16 AM   #6
Valued Technical Contributor
 
DavidM's Avatar
 
City: Litchfield, Ct
Join Date: Aug 2012
Posts: 6,786
Yes, that was sort of the solution I was alluding to above. You can also split the existing panel into two parts- one fed by the shore power directly and another fed by the transfer switch. Requires cutting the + bus in the panel and having a spare breaker spot to feed the inverter's transfer switch.


David
DavidM is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


» Trawler Port Captains
Port Captains are TF volunteers who can serve as local guides or assist with local arrangements and information. Search below to locate Port Captains near your destination. To learn more about this program read here: TF Port Captain Program





All times are GMT -5. The time now is 12:22 AM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2006 - 2012