Reply
 
Thread Tools Search this Thread Display Modes
 
Old 07-17-2015, 09:19 PM   #1
Veteran Member
 
VagabondLRT's Avatar
 
Join Date: Jan 2015
Posts: 25
Computer Nav

Click image for larger version

Name:	ImageUploadedByTrawler Forum1437185805.331365.jpg
Views:	193
Size:	50.5 KB
ID:	42197 Anyone in the know see any reason this would not work ?
VagabondLRT is offline   Reply With Quote
Old 07-17-2015, 09:35 PM   #2
Guru
 
N4712's Avatar
 
City: South FL
Vessel Name: Oliver
Vessel Model: Nordhavn 47 Hull# 12
Join Date: Apr 2013
Posts: 3,607
Can't be two talkers on 0183. So the AP TX and GPS TX can't both go into the multiplexer.
__________________
Thanks, Oliver
M/V Oliver
Nordhavn 47 Hull #12
N4712 is offline   Reply With Quote
Old 07-18-2015, 05:26 AM   #3
Guru
 
Capt.Bill11's Avatar
 
City: Sarasota/Ft. Lauderdale
Join Date: Apr 2014
Posts: 5,438
I can't really see that diagram well enough to see what he is trying to do. But there are 0183 multiplexers that will allow up to 4 talker inputs.


This might be helpful: http://www.actisense.com/products/nm...ormation-sheet
Capt.Bill11 is offline   Reply With Quote
Old 07-18-2015, 05:55 AM   #4
Guru
 
N4712's Avatar
 
City: South FL
Vessel Name: Oliver
Vessel Model: Nordhavn 47 Hull# 12
Join Date: Apr 2013
Posts: 3,607
Quote:
Originally Posted by Capt.Bill11 View Post
I can't really see that diagram well enough to see what he is trying to do. But there are 0183 multiplexers that will allow up to 4 talker inputs.


This might be helpful: http://www.actisense.com/products/nm...ormation-sheet

He had two talkers on one input is what I meant.
__________________
Thanks, Oliver
M/V Oliver
Nordhavn 47 Hull #12
N4712 is offline   Reply With Quote
Old 07-18-2015, 05:12 PM   #5
Veteran Member
 
VagabondLRT's Avatar
 
Join Date: Jan 2015
Posts: 25
The main reason I chose the NoLand AM43 was it collects the complete sentence from the device(s) before sending to the computer. I do appreciate the input if for nothing else but to make me think and review.
VagabondLRT is offline   Reply With Quote
Old 07-19-2015, 10:56 AM   #6
Veteran Member
 
VagabondLRT's Avatar
 
Join Date: Jan 2015
Posts: 25
If 2 talkers won't work on the #3 input I could connect to the high speed input and reconfigure the baud rate to match the device. (?). I know it can be changed but this method would use the AIS terminals which would the require an expander if AIS is added at a later time. Is this a better option ?
VagabondLRT is offline   Reply With Quote
Old 08-01-2015, 11:41 AM   #7
Veteran Member
 
VagabondLRT's Avatar
 
Join Date: Jan 2015
Posts: 25
Well it looks like the new AM43 is dead. Appeared to be working for about 10 minutes and then started losing input signals until there was nothing. Grrrr.
VagabondLRT is offline   Reply With Quote
Old 08-11-2015, 07:31 AM   #8
Veteran Member
 
VagabondLRT's Avatar
 
Join Date: Jan 2015
Posts: 25
Simple wire issue resolved. All appears to work except a small glitch with the sounder. Ready for sea trial.
VagabondLRT is offline   Reply With Quote
Old 08-11-2015, 11:27 PM   #9
Guru
 
refugio's Avatar
 
City: Meydenbauer Bay Yacht Club
Vessel Name: Lulu (Refugio sold)
Join Date: Mar 2012
Posts: 1,284
Quote:
Originally Posted by VagabondLRT View Post
Simple wire issue resolved. All appears to work except a small glitch with the sounder. Ready for sea trial.
I have the same CVS-106 MKII - didn't know it spit out 0183! Thanks for that.
__________________
Keith
refugio is offline   Reply With Quote
Old 08-13-2015, 07:22 AM   #10
Veteran Member
 
VagabondLRT's Avatar
 
Join Date: Jan 2015
Posts: 25
Click image for larger version

Name:	ImageUploadedByTrawler Forum1439468560.230913.jpg
Views:	66
Size:	44.9 KB
ID:	43124
VagabondLRT is offline   Reply With Quote
Old 08-13-2015, 07:26 AM   #11
Veteran Member
 
VagabondLRT's Avatar
 
Join Date: Jan 2015
Posts: 25
Hope that helps Refugio .
VagabondLRT is offline   Reply With Quote
Old 08-13-2015, 11:29 AM   #12
Guru
 
refugio's Avatar
 
City: Meydenbauer Bay Yacht Club
Vessel Name: Lulu (Refugio sold)
Join Date: Mar 2012
Posts: 1,284
Quote:
Originally Posted by VagabondLRT View Post
Hope that helps Refugio .
Thanks! I've had an 0183 setup for a few years - GPS, AIS to PC and EPIRB. And a more recent Garmin N2K network. I'll be connecting them with an Actisense NGW-1 next week, and then installing a Raymarine AP with its own STNG network. Which I then hope to bridge. So getting some depth data could be handy indeed!
__________________
Keith
refugio is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


» Trawler Port Captains
Port Captains are TF volunteers who can serve as local guides or assist with local arrangements and information. Search below to locate Port Captains near your destination. To learn more about this program read here: TF Port Captain Program





All times are GMT -5. The time now is 12:12 PM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2006 - 2012