Reply
 
Thread Tools Search this Thread Display Modes
 
Old 02-21-2013, 08:02 PM   #1
Senior Member
 
City: Hong Kong
Join Date: Nov 2012
Posts: 247
Here is how to increase the charge voltage of alternator

I stumbled over this excellent article about how to change the charging voltage of an alternator - and thought it would be a benefitial for many members:

SmartGauge Electronics - Increasing alternator charge voltages

There are many other good articles on this site.
Searios is offline   Reply With Quote
Old 02-21-2013, 10:12 PM   #2
Veteran Member
 
City: Mandurah
Vessel Name: Blu Tug
Vessel Model: R27 Ranger Tug
Join Date: Nov 2011
Posts: 40
alternator outoput

Try a good auto electrican we used to Delta wire alternators that nearly doubled the output and sometimes you needed to upgrade the regulator but it was a very easy job to do
Cheers
Peter & Ronie B
blunda is offline   Reply With Quote
Old 02-22-2013, 04:27 AM   #3
Guru
 
Daddyo's Avatar
 
City: Cruising East Coast US
Vessel Name: Grace
Vessel Model: DeFever 48
Join Date: Apr 2008
Posts: 2,420
Good article but the other thing I think is perhaps more important is to change the pulley to the smallest possible. We have 2 5/8" if I remember correctly (not at the boat) and they work perfect. This compensates for the much slower rpms we cruise at (1400). Belt wear or dust has been no problem. Do be sure and use a notched top quality belt especially if you go smaller.
__________________
Cruiser
Esse Quam Videri
Daddyo is offline   Reply With Quote
Old 02-22-2013, 06:09 AM   #4
FF
Guru
 
FF's Avatar
 
Join Date: Oct 2007
Posts: 22,553
Alternator cooling is RPM related.

High output with low RPM may Chernoble.
FF is offline   Reply With Quote
Old 02-22-2013, 07:20 AM   #5
JD
Guru
 
JD's Avatar
 
City: New Bern NC
Vessel Name: Stella Di Mare
Vessel Model: Mainship 34t
Join Date: Apr 2010
Posts: 1,702
Quote:
Originally Posted by Searios View Post
I stumbled over this excellent article about how to change the charging voltage of an alternator - and thought it would be a benefitial for many members:

SmartGauge Electronics - Increasing alternator charge voltages

There are many other good articles on this site.
Why not have the internal reg removed and the Alt converted to external control? $50 - $75. Then use an external regulator like the Balmar ARS -5 and be done with it with in a few hours and for about $300. No guessing no taking the Alt apart three times. The ARS series are adjustable to what ever out put you may need.
__________________
Vinny

M/V Stella Di Mare
New Bern NC
JD is offline   Reply With Quote
Old 02-22-2013, 07:44 AM   #6
Guru
 
rwidman's Avatar
 
City: North Charleston, SC
Join Date: Sep 2010
Posts: 4,870
I've got to wonder - If it's so easy to raise the output of an alternator, why don't they just make them like that in the first place?
rwidman is offline   Reply With Quote
Old 02-22-2013, 10:34 AM   #7
FF
Guru
 
FF's Avatar
 
Join Date: Oct 2007
Posts: 22,553
The hassle here is you are mixing cars , trucks and boats.

Sure 13.5 or .8 may be too low for a car that is not driven that much , but on a boat boosting to 14.4 to get a great charge will simply boil the batteries after a few hours.

The better solution is a modern alt for your car , and almost anyone's SMART 3 or 4 stage reg on a nice big alternator.

Usually folks are too lazy to build a big strong bracket for a HD alt , and install a pair of belts to run it.

If you can do almost all the DC charging from the engine , no need for the noisemaker to grind away.

If you use the noisemaker , a SMART V reg and a 150A + alt will fill batteries loads faster than a 150A "rated" battery charger, esp with an under 10KW noisemaker.
FF is offline   Reply With Quote
Old 02-22-2013, 07:06 PM   #8
Newbie
 
About Time's Avatar
 
City: Joe Wheeler
Vessel Name: About Time
Vessel Model: Albin 40 Sundeck
Join Date: Jun 2012
Posts: 3
Quote:
Originally Posted by Searios View Post
I stumbled over this excellent article about how to change the charging voltage of an alternator - and thought it would be a benefitial for many members:

SmartGauge Electronics - Increasing alternator charge voltages

There are many other good articles on this site.
You are so right..... Thanks...
About Time is offline   Reply With Quote
Old 02-22-2013, 09:34 PM   #9
Guru
 
City: Hotel, CA
Join Date: Sep 2011
Posts: 8,323
Quote:
Originally Posted by FF View Post
Alternator cooling is RPM related.

High output with low RPM may Chernoble.
FF, have any recommendations for a 350 Chevy based gasser?
__________________
Craig

It's easier to fool people than to convince them that they've been fooled - Mark Twain
CPseudonym is offline   Reply With Quote
Old 02-23-2013, 05:06 AM   #10
FF
Guru
 
FF's Avatar
 
Join Date: Oct 2007
Posts: 22,553
, "have any recommendations for a 350 Chevy based gasser?"

Really depends on how you cruise and what you need.

For many folks a visit to NAPA will find an alternator of 65A with factory setup for an external regulator that bolts right in.

These were used in "big" cars Caddies and some Olds back in the 60's or 70's and are still stock items, and at times can be had for cheap rebuilt , $35 -40 exchange on sale. Autozone vs Advanced in the local paper.

Your favorite 3 stage V reg will hook up easily and the cruise speeds of most gassers is high enough for good cooling..

Look at the front of the alt and be sure the cooling fins are at an angle not at 90deg to the shaft.

The 90 are "universal " and don't cool as well as the angled fins.

The annoying car music folks , you know the kids with amps in the trunk blasting for 1/2 mile with base that cracks concrete , is also a source for drop in alts with loads more power.Use the marine regulator not a built in.
FF is offline   Reply With Quote
Old 02-23-2013, 09:38 AM   #11
Guru
 
City: Hotel, CA
Join Date: Sep 2011
Posts: 8,323
Thanks Fred
__________________
Craig

It's easier to fool people than to convince them that they've been fooled - Mark Twain
CPseudonym is offline   Reply With Quote
Old 02-24-2013, 07:17 AM   #12
Guru
 
City: Here
Join Date: Sep 2012
Posts: 2,940
[QUOTE=FF;136577], "have any recommendations for a 350 Chevy based gasser?"


For many folks a visit to NAPA will find an alternator of 65A with factory setup for an external regulator that bolts right in.

QUOTE]

Do not buy an alternator from NAPA and put it in a gasoline engine compartment ! To put anything but a marine "ignition protected" alternator in there is extremely dangerous.
boatpoker is online now   Reply With Quote
Old 02-24-2013, 09:55 AM   #13
Guru
 
rwidman's Avatar
 
City: North Charleston, SC
Join Date: Sep 2010
Posts: 4,870
Quote:
Originally Posted by boatpoker View Post
Do not buy an alternator from NAPA and put it in a gasoline engine compartment ! To put anything but a marine "ignition protected" alternator in there is extremely dangerous.
Very important and very good advice. Anything electrical in a gasoline engine room or compartment must be ignition protected and should be labelled as such.
rwidman is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


» Trawler Port Captains
Port Captains are TF volunteers who can serve as local guides or assist with local arrangements and information. Search below to locate Port Captains near your destination. To learn more about this program read here: TF Port Captain Program





All times are GMT -5. The time now is 07:07 PM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2006 - 2012