Adequate battery charger???

The friendliest place on the web for anyone who enjoys boating.
If you have answers, please help by responding to the unanswered posts.

Fighterpilot

Senior Member
Joined
Apr 17, 2011
Messages
380
Trying to determine if I need to upgrade the onboard battery charger. The boat is a Californian 34LRC with twin 3208NA. I replaced the two 8Ds with a pair of 6 volts for the house and two 34s in parallel for starters. Present charger is a Quest 15 AMP 2515 charger. Is this charger up to the technology of the new ones of today, that is three stage etc.? Or, should I upgrade to something like a Charles XP 2000. If the newer chargers are called for what is recommended. I have found negative reviews on the Promariner series and Xantrex, but postive reviews on the Charles. Maybe the Quest 2515 technology is adequate. Thanks
 
15 amps isn't much of a recharge rate on a boat that size.

We went with a Charles Industries IMC-40. Charles is arguably one of the best chargers made.

This unit has a capacity of 40 amps total. It is a four bank charger.
We connected it to the port engine, starboard engine, generator, and to the house bank through a on/off switch.

For charging the 840 AH house bank we rely mostly on the 150 amp Xantrex inverter/charger. If this fails our backup is the Charles Industries charger.
 
battery charger

I had heard the Charles was a good product. I must correct my model however-previous boat was a 2515, this one is 2630C at 30 amps. Just have the installation instructions, no description of how it works and can't find it on the web either. Guest bought out by some company so paper trail is spotty. Thanks
 
Hi Fighter Pilot, Guest was bought by Marinco. The 2630 doesn't seem to be current production. I would guess it was replaced by the 2631 which has three 10 amp outputs. Guest does things a little differently than other charger manufactures. While they call it a 30 amp charger, it will only supply 10 amps on each lead. http://www.marinco.com/product/30-amp-battery-charger-2 Other chargers might put 10 amps into one battery and 20 amps into another depending on what they need. I'm going to replace my Guest 25 amp charger with a 40 amp Newmar Phase Three Charger. Newmar PT-40 Phase Three Smart 12 volt Battery Charger I'm also installing a Blue Sea Add a Battery kit to control the charging of my house and starter batteries. Add-a-Battery*—*Blue Sea Systems
 
Most battery "charging" is dockside keeping the batt set charged (not overcharged) for weeks on end.

The DC dockside load of fans, lights , radio is usually minor and temporary, , even DC fridges are off 1/2 time so only minor current is required.

3% of the battery capacity would be plenty.
Tho for a good smart charger the minimum of 10A or 15A may be the smallest you can purchase.

The other use is gen set charging of start batts , where zero sophistication is required , just a fast charge.

The usual service station fast charger unit would be first choice for cruising.

FF
 
Last edited:
I noted the later Guess chargers did divide the AMPS. Don't know what this one does but suspect 15-15 or 10-20. On the web listing for it note it is discontinued. Many times one can still find manuals but no luck thus far. I even went to the Marinco site but I haven't called them yet. Thanks
 
My Guest charger has 10, 10 and 5 amp outputs. The 10 amp outputs are marked battery 1 and battery 2. The 5 amp output is marked Start. I only have two batteries so I don't use the 5 amp lead. I plan to combine the two existing 4D batteries into a single house bank and add a smaller start battery. I want a bigger charger so I can limit generator run time while I'm on the hook.
 
Before you spend bucks on a marine charger, have a look at the Iota chargers. We have used the 40 Amp Smart Charger on your exact battery set up, The Trawler Beach House: Batteries and Battery Chargers For The Boat , for a couple of years now and the charger has been flawless, its quiet and generates no heat. It will also do a weekly equalization with no input from the user. For much less than the price of a marine charger you can buy two and always have a back up although I can't imagine one failing. We are about to relocate our house bank and add a third pair of 6 volts but won't make any changes to the chargers. Of course these don't offer an inverter option. Chuck
 
Before you spend bucks on a marine charger, have a look at the Iota chargers. We have used the 40 Amp Smart Charger on your exact battery set up, The Trawler Beach House: Batteries and Battery Chargers For The Boat , for a couple of years now and the charger has been flawless, its quiet and generates no heat. It will also do a weekly equalization with no input from the user. For much less than the price of a marine charger you can buy two and always have a back up although I can't imagine one failing. We are about to relocate our house bank and add a third pair of 6 volts but won't make any changes to the chargers. Of course these don't offer an inverter option. Chuck

I am making the exact same upgrade Chuck is making and I too bought an Iota. The difference is I bought a 55 amp. Make sure that if you get one, order it with the IQ4 option installed.

Tom-
 
Good point Tom, EXCEPT, if you plan on adding two chargers in parallel later, go for the plug in that goes with the unit rather than the IQ4 built in. With the built-in you can't parallel them. Chuck
 
i guess we are we talking 12V amps? in that case 10 - 15 amps aint much.

btw, for what it is worth, i have a xantrex charger/inverter and it works well, no complaints from here...
 
Last edited:
Have looked at Iota but would need two since it is my understanding they only do one bank. I can get a Charles 2000SP at a good discount from Defender, no tax, but would have shipping charge. 10Amp $209, but am thinking 20 AMP for $285. $100 jump when one goes to 30 AMP. For our use I think 20 AMP would be sufficient on two banks. Can easily mount where the guest is using the same A/C current input and just come out with their DC wires.



I have been checking the Voltage ont he old Guest 2530C but it is my understanding it isn't regulated like the newer ones and I have to keep turning it on an off. Charles has a good reputation so it is under consideration. Thanks
 
What was the uproar about non-marine battery chargers years ago?

Something about how "110 neutral" was wired inside...I'm pretty sure it was the old "wound transformer" type but I couldn't find anything on it in my saved articles or search engine.
 
The NON Marine chargers often used an autotransformer which DOES NOT isolate.
Both the transformer input [primary] and the output [secondary] are tied together so they can cause problems on boats.
A good marine charger will be fully isolated with no connection between primary and secondary meaning reduced chance for AC leakage causing electrocution and damage to underwater metal boat parts.
 
the Iota's have no issues being used on a boat. The single bank is usually what many object to, however, as I said you can purchase two for less than the price of one. As a marine service tech for over 35 years I have installed more than my share of every make battery charger and inverter. If you must go marine, I recommend Victron or Magnum. Avoid Xantrex at all cost. The Iota does a much better job of maintaining batteries than any marine unit I have used over the years for much less cost. For two banks you can install two chargers and still have money left over. This is our set up on Beach House for two pairs of golf cart batteries for the house and a single start battery. Chuck

DSC02433a.jpg
 
Captn Chuck, you experience with the Iotas and the 35 years of marine tech. work gives you credibility. A little more discussion would be helpful to me.

Cost. Cheapest like yours that I could find was $178.50. Times two = $347.00
My space is limited, would need to do some rewiring to to make two fit.

The charles marine unit 2000SP series starts at $210 for 10AMPs and goes up to $355.00 for 30 AMPs. For our use could probably use a 15 or 20 amp unit for a dollar savings versus the Iota.

Installation would be simpler.

Now, all that said, does the Iotas offer advantages that would warrant purchase of same in spite of a higher cost and installation issues? Thanks
 
Fiterpilot, The Iota 45 is available from a number of sources at $140-$150. As HopCar stated, there are options to connect a single source charger to multiple banks that are inexpensive and simple to install. But two Iota 45's in parallel now gives you a 90 Amp battery charger and a back up should one fail. A 90 amp Charles battery charger at West marine is $790.00 . A significant difference. A single 90 amp Iota is around $297.00 plus what ever you choose to be able to use it on two banks, I would call that significant. You can of course choose to spend the extra hundreds of dollars for a marine unit. I simply tried to offer you a very good alternative and save you some money. But as with any decision, it's your boat and you have to do what you are comfortable with. For those still interested, there is an excellent article on the Iota Chargers here, http://www.batterystuff.com/battery-chargers/brands/iota/IOTA-DLS1230.html . Chuck
 
Last edited:
Chuck, Have you or would you please take a meter on the ohm scale to one of the plugs between the neutral and ground. Thanks
 
Chuck, Have you or would you please take a meter on the ohm scale to one of the plugs between the neutral and ground. Thanks
And the purpose would be? There are no issues between the neutral and ground with the Iota chargers. This is not a clip on the battery, plug into an outlet style charger. Chuck
 
And the purpose would be? There are no issues between the neutral and ground with the Iota chargers. This is not a clip on the battery, plug into an outlet style charger. Chuck

Didn't mean to offend you or your choice of battery chargers. I know the Iota is being hailed as the next coming by many internet blogers. I have not gotten my hands on one to be sure there would be no secondary bonding issues which was the reason for my request. Thanks anyways.

Bob
TBL Marine Electrical
 
Bob, No offense taken. Unfortunately too many folks still cling to the beliefs that were indeed issues ten or twenty years ago. But time marches on and so does technology. I have no financial interest in Iota other than being a very satisfied customer and the experience of seeing the units operating in many other boats. They are designed to run in the marine and RV environments and are a favorite for those using solar energy. It is a bit different technology than your average charger designed specifically for boats, but that is not necessarily a bad thing. Iota did have a bad batch come from the factory a while back but were quick to resolve the problem and replace any bad chargers. Their customer service is first rate as far as I am concerned. We so often see companies like Xantrex which has gone to pot, that when something comes along that works, is good quality and we don't have to refinance the boat to purchase it, I get the word out. They aren't made to hard wire them, they come with a three prong plug, but it is easy to hard wire. We chose to install an outlet dedicated to the charger and just plug it in. After a few years of service on this boat and about five years on our previous boat, we are happy with how well it has maintained the batteries under cruising conditions where they are often deeply discharged and recharged daily. The other positive I hear often is that they operate just as well plugged into shore power, on a dedicated generator, or a portable Honda, which we have been using for a couple of years now. When something on the boat needs to be marine specific, we don't hesitate, BUT, if there is another product out there that doesn't carry the marine specific cost and does as well or better, I am for it 200 %. Thanks, Chuck
 
And the purpose would be? There are no issues between the neutral and ground with the Iota chargers. This is not a clip on the battery, plug into an outlet style charger. Chuck

sorry beat me to my post! ;)
 
I would suggest that anyone that has concerns about these chargers or that aren't comfortable with the technology, not use them. Chuck
 
I would suggest that anyone that has concerns about these chargers or that aren't comfortable with the technology, not use them. Chuck

The first Iota charger I looked up said RV/Marine applications
IOTA DLS-15 12 Volt 15 Amp Battery Charger

So I'm not worried...:thumb: Thanks for the info...:D
 
sorry beat me to my post! ;)

You should probably go back and reread post 13. That was the reason for my question.

Chuck, I have heard nothing but good about Iota chargers. I think the cord is fine. My only question is are the ground and neutral isolated. I am also 200% for something not marine rated that does the job. I asked you to check because you have one and it looks easy to get to.There is no technology questions, they seem like a fine unit.
 
Last edited:
Back on the Iota versus the brand X. I do have just two banks. One house, a pair of 6 volts in series and a pair of 34s in parallel. All flooded. Looking at the drawings for the Blue sea, what do I do with two alternators? May be above my ability to get hooked up. Also, why does one need 90 Amps? Why would one buy a 90 Amp Charles when 20 would do? What is the advantage that comes with the 90 amp Iotas? I guess I am missing something, but be patient with me. Thanks
 
FP,

IMO, you don't need 90A charging on shore power...30-60A would be plenty for your bank sizes. No need to change your alternator connections regardless of what you do for shore charging.

A single bank 3-stage 55A charger combined with a Blue Seas ACR will allow you to charge the house bank pretty quickly and then share that charge with the start bank once the house reaches a min voltage, typically above 13V.

I have 6 GC batts in series/parallel for 12V-660AH. I charge that bank with a 30A shore charger and that is a bit undersized, but the way I look at it, I have plenty of time to charge at the dock.

I don't recall if you have a generator. If so, that will provide a good source of charge at anchor. I use a Honda eu2000, so my away-from-the-dock charging comes from the mains/alternators and Honda/110V charger.

I plan to upgrade my port alternator with a 100A Balmar alternator with 3-stage external regulator to make up for my less-than-optimum Honda/shore charger combo for at-anchor use. But I normally run to another spot after a day or two on the hook, so it hasn't been a problem so far. (The Balmar and regulator has been sitting in a box patiently waiting for me.)

Some day I might add a larger capacity shore charger, but for now, this is working fine.
 
The big advantage with a hi amp charger is its ability to recharge accidentally dead start batts , if the noisemaker is large enough.

In port 15A would probably be fine as every modern toy or LED lamp uses less electric..

For folks that cruise with a gaggle , the garage high amp batt charger is far easier to pass aboard a dead boat , and hook up than passing a set of start batts.

YRMV
 
Appreciate all the input and subsequent discussion. Considering my lack of know how in installing one Iota with Blue Sea or two Iotas my safest route is a modern replacement for the old Guest. I can just unhook the Guest both A/C and DC leads and hook up something like a Charles 15 or 20 AMP 2000SP. By the time I buy an Iota system and hire a marine specialist to hook the system up I have more dollars invested than the simple Charles system. Considering my use
Just need something to keep the batteries up. I have a couple solar panels I used on a previous smaller boat with just one battery but don't believe that would be suffiecient. Boat sits at the dock most of the time, unoccupied, and is used for the once in a while fishing trip, cruise the bay now and than, 4th of July fireworks trip, Blue Angel show, and cruising the ICC once in awhile.

Present Guest 2530C does the job but I have to monitor battery charge and turn it on an off as appropriate. Would like to avoid the day to day trip to check on the batteries.
 

Latest posts

Back
Top Bottom