|
09-25-2017, 12:50 AM
|
#1
|
Member
City: Seattle, WA
Vessel Model: Canoe Cove
Join Date: Jun 2017
Posts: 11
|
What am I looking at?
This was a very clean, late 1970s DeFever trawler I looked at (for sale) last week. It's the 10th trawler I've looked at over the last 3 months. Never have I seen an exterior finish with this appearance before.
Is this just a lousy glassing job or something more sinister? (Notice the window at right is a replacement.)
|
|
|
09-25-2017, 01:22 AM
|
#2
|
Guru
City: Sydney
Vessel Name: Sojourn
Vessel Model: Integrity 386
Join Date: Oct 2011
Posts: 13,329
|
It looks like Manly beach on a rough day. What happens when you press on one of the raised areas? There looks to be a mark to the left about 2/3rds down the pic. Is that real and what is it, or just artifact on the pic?
__________________
BruceK
2005 Integrity 386 "Sojourn"
Sydney Australia
|
|
|
09-25-2017, 05:33 AM
|
#3
|
Senior Member
City: Green Cove Springs, Florida
Join Date: Feb 2012
Posts: 344
|
I have seen that on quite a few far eastern built vessels. My best guess is the materials are hygroscopic or were not completely cured when originally constructed. Either can cause dimensional changes. I have seen these with and without moisture involved.
|
|
|
09-25-2017, 05:36 AM
|
#4
|
Guru
Join Date: Oct 2007
Posts: 22,553
|
Looks from the photo like the pox.
A delamination of the gell coat , or deeper, usually caused by a poor repair or poor shop conditions on the origional layup.
Usually mostly a cosmetic problem seldom structural enough to cause the hull to fail.
|
|
|
09-25-2017, 06:11 AM
|
#5
|
Member
City: Seattle, WA
Vessel Model: Canoe Cove
Join Date: Jun 2017
Posts: 11
|
Yes, I should have clarified, these are hard surface dimensional changes, not color variations. Hard, not soft to touch.
|
|
|
09-25-2017, 06:14 AM
|
#6
|
Guru
City: Sydney
Join Date: Jul 2015
Posts: 1,646
|
Run Forrest RUN
|
|
|
09-25-2017, 06:36 AM
|
#7
|
Guru
City: Fort Myers, FL... Summers in the Great Lakes
Vessel Name: Slow Hand
Vessel Model: Cherubini Independence 45
Join Date: Dec 2010
Posts: 12,834
|
Looks like above water blisters. Wonder what the bottom looks like.
Ted
__________________
Blog: mvslowhand.com
I'm tired of fast moves, I've got a slow groove, on my mind.....
I want to spend some time, Not come and go in a heated rush.....
"Slow Hand" by The Pointer Sisters
|
|
|
09-25-2017, 06:45 AM
|
#8
|
Guru
City: Ft Pierce
Vessel Name: Sold
Vessel Model: Was an Albin/PSN 40
Join Date: Oct 2011
Posts: 28,149
|
Really hard to say from just a picture.
If that is the exterior of the superstructure and it is very solid, like hit it with a hammer and notbing happens solid, it might be a lousy glass job where resin pooled and hardened before it got smoothed out.
That is more common on horizontal surfaces by an impatient glasser (me), but possible on vertical surfaces too.
Could be bubbling under glass layers where the cloth didnt stick yet thick enough to feel hard to a soft touch, not the hammer test.
The third possibility would be someone tried to slather filler all over and didnt do a good job of fairing.
Either way, one of the worst glass jobs I have seen.
Not a show stopper if either of the above and the pky is dry and strong underneath, but a lot of work to correct, especially if all over the entire superstucture.
But without finding out why it looks that way and if a repair (why also?)..... you have a dilemma.....
|
|
|
09-25-2017, 10:15 AM
|
#9
|
Guru
City: Pender Harbour, BC
Vessel Name: Gwaii Haanas
Vessel Model: Custom Aluminum 52
Join Date: Sep 2013
Posts: 3,791
|
Many Taiwan trawlers suffered from leaks and subsequent substrate rotting, those windows were likely wood originally. It looks to me like the walls were not rebuilt, just glassed over. Is there signs of damage inside? Discolouration or staining? A smell? If any, I would run. If not, carefully look underneath the side decks in the saloon and in both staterooms for signs of damage. Did it have teak decks?
A lot of owners, when faced with this failure just glass over everything as the proper repair is daunting and expensive. That's what this looks like to me.
__________________
Don't believe everything that you think.
|
|
|
|
Thread Tools |
Search this Thread |
|
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Trawler Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|