Kept finding a small puddle of water in the bilge area and just found it's been seeping out from the encapsulated keel. I cut a hole in the bilge floor and it's filled solid with lead chucks and pellets, with fresh water mixed in right up to the top. So I drilled a 1/4" hole in the bottom of the keel and gallons of water drained out. Really glad I found this and was able to drain the water, but need some suggestions on how to dry it out. I was thinking to pour some acetone in there and let it drain a few times. Anyone else have another solution? Heat, a vacuum, etc? Or just let it dry by itself? I wont be launching the boat for another year so it can bake over the summer.