Reply
 
Thread Tools Search this Thread Display Modes
 
Old 09-04-2012, 02:19 PM   #1
Guru
 
Steve's Avatar
 
City: Thibodaux, Louisiana
Vessel Name: Gumbo
Vessel Model: 2003 Monk 36
Join Date: Oct 2007
Posts: 3,882
Flybridge Instrument panel cover

The cover of the upper instrument panel is a formed piece of Lexan?(I guess) it is fogged srom the sunlight. I'm wondering if anyone has tried buffing that sort of item with and automobile headlight cover kit, the kind that have a sponge ball used on a drill with some sort of buffing compound?
Any ideas?
Steve W
Steve is offline   Reply With Quote
Old 09-04-2012, 02:37 PM   #2
Guru
 
rwidman's Avatar
 
City: North Charleston, SC
Join Date: Sep 2010
Posts: 4,870
One of the commercials on the TV show "Shipshape TV" (a commercial in its own way) shows the owner of the Flitz company using his product to restore a plastic hatch cover. So - it might work. Or you could use Flitz polish.
rwidman is offline   Reply With Quote
Old 09-04-2012, 04:48 PM   #3
TF Site Team
 
FlyWright's Avatar
 
City: California Delta
Vessel Name: FlyWright
Vessel Model: 1977 Marshall Californian 34 LRC
Join Date: Apr 2008
Posts: 13,728
It might be easier and look better if you can replace the plastic pane with a UV resistant plastic or shatterproof glass pane. The plastics I've seen that have become glazed or fogged by the UV exposure looked to be more than surface deep.
FlyWright is offline   Reply With Quote
Old 09-04-2012, 05:39 PM   #4
Guru
 
jleonard's Avatar
 
Join Date: Jun 2008
Posts: 5,037
My son (owns an automotive shop) polishes out headlights often so that system does work very well. Would be worth trying IMO.
__________________
Jay Leonard
Ex boats: 1983 40 Albin trunk cabin, 1978 Mainship 34 Model 1
New Port Richey, Fl
jleonard is offline   Reply With Quote
Old 09-04-2012, 07:03 PM   #5
Guru
 
SomeSailor's Avatar
 
City: Everett, WA
Vessel Name: Honey Badger
Vessel Model: 42' CHB Europa
Join Date: Oct 2011
Posts: 784
Do you have a pic?

I run a CNC shop as a side business and have the capability to make CNC parts with much less effort that scratch building.
SomeSailor is offline   Reply With Quote
Old 09-04-2012, 09:02 PM   #6
Guru
 
Steve's Avatar
 
City: Thibodaux, Louisiana
Vessel Name: Gumbo
Vessel Model: 2003 Monk 36
Join Date: Oct 2007
Posts: 3,882
This is a formed piece, Imagine a 3/16 piece of lexan heated and then placed over a female mold the shape of a rectangle cake pan and pressed into it with a male pattern. I believe might have been made in Taiwan maybe I can get one through the Monk Owners group. But I was wondering how polishing might work out.
Thanks all for the replies.
Steve W
Steve is offline   Reply With Quote
Old 09-04-2012, 09:09 PM   #7
Guru
 
SomeSailor's Avatar
 
City: Everett, WA
Vessel Name: Honey Badger
Vessel Model: 42' CHB Europa
Join Date: Oct 2011
Posts: 784
If ya get a chance to snap a pic, lemme know. I recently cut a new venturi for mine and enjoy working / thermo-forming plastics as well.
SomeSailor is offline   Reply With Quote
Old 09-05-2012, 02:07 PM   #8
Guru
 
Carolena's Avatar
 
City: DC
Vessel Name: Carolena II
Vessel Model: Nordic Tug 32/34
Join Date: Aug 2012
Posts: 635
We used McGuires plastic polish on the hatch lenses on our current sail boat. It made them look a lot better, but after 25 years in the sun, there is only so much you can do. I'd give it a try. We eventually replaced the hatches becuse there was crazing in the material that wouldn't come out. Thought about just putting in new lenses, but then we would have also needed to sandblast and paint the frames. Anyone looking for some bomar hatches in restorable condition?
Carolena is offline   Reply With Quote
Old 09-06-2012, 05:33 AM   #9
FF
Guru
 
FF's Avatar
 
Join Date: Oct 2007
Posts: 22,553
"placed over a female mold the shape of a rectangle cake pan and pressed into it with a male pattern."

TOO MUCH WORK (TWO molds) for a Chinese mfg.

Most likely the bottom mold had holes in it , the plastic was heated then placed on the mold and a shop vac used to pull it into the mold. 1/2 the effort.

Hot plastic is easy to form.
FF is offline   Reply With Quote
Old 09-07-2012, 08:05 AM   #10
Guru
 
SomeSailor's Avatar
 
City: Everett, WA
Vessel Name: Honey Badger
Vessel Model: 42' CHB Europa
Join Date: Oct 2011
Posts: 784
That's why I was hoping someone had a picture. I could very easily make a drape mold on my CNC and possible pull a few spares. I need a similar cover for my gauges on my CHB.
SomeSailor is offline   Reply With Quote
Old 09-07-2012, 10:52 AM   #11
Guru
 
skipperdude's Avatar
 
City: Whittier AK
Vessel Name: Apache II
Vessel Model: 1974 Donald Jones
Join Date: Oct 2007
Posts: 3,147
Could you use the old one as a mold to form a new one?

Heat the plastic and drape it over the old one.

Just thinking.

Sd
__________________
If you can't repair it maybe it shouldn't be on the boat
skipperdude is offline   Reply With Quote
Old 09-07-2012, 01:20 PM   #12
Guru
 
SomeSailor's Avatar
 
City: Everett, WA
Vessel Name: Honey Badger
Vessel Model: 42' CHB Europa
Join Date: Oct 2011
Posts: 784
If I had an old one, it would be as simple as CNC probing the interior of the old one and making the drape plug from that. Vacuum molding is pretty straightforward from there.

Anyone have an old one laying around that I could probe?
SomeSailor is offline   Reply With Quote
Old 09-07-2012, 01:25 PM   #13
Guru
 
skipperdude's Avatar
 
City: Whittier AK
Vessel Name: Apache II
Vessel Model: 1974 Donald Jones
Join Date: Oct 2007
Posts: 3,147
what is CNC
__________________
If you can't repair it maybe it shouldn't be on the boat
skipperdude is offline   Reply With Quote
Old 09-07-2012, 03:02 PM   #14
Guru
 
SomeSailor's Avatar
 
City: Everett, WA
Vessel Name: Honey Badger
Vessel Model: 42' CHB Europa
Join Date: Oct 2011
Posts: 784
Computer Numeric Control. I basically tell a computerized digitizer to go in and probe the interior of the cover and create a 3D CAD file from which I can made a plug.

It doesn't do anything to the original in the process.
SomeSailor is offline   Reply With Quote
Old 09-08-2012, 07:11 AM   #15
Art
Guru
 
Art's Avatar
 
City: SF Bay Area
Vessel Model: Tollycraft 34' Tri Cabin
Join Date: Feb 2011
Posts: 12,569
On the bridge, my 1977 Tolly has two original 9” x 9” x 7/8" molded plastic covers, one for full instrumentation of each engine. They had become so dulled that I could no longer accurately read gauges. I removed off dash and on both sides of plastic I vigorously hand rubbed with red rubbing compound, then with a white 50/50 rubbing/polish compound, and then with “Color Back” an auto shine liquid... and finally with DuPont Teflon liquid glaze. Came back exceptionally well – not absolutely perfect, but uniform look and darn clear to see through. Did that bout two years ago, still just as uniform and clear today.
Art is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


» Trawler Port Captains
Port Captains are TF volunteers who can serve as local guides or assist with local arrangements and information. Search below to locate Port Captains near your destination. To learn more about this program read here: TF Port Captain Program





All times are GMT -5. The time now is 04:08 PM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2006 - 2012