Reply
 
Thread Tools Search this Thread Display Modes
 
Old 10-05-2011, 04:56 AM   #1
Senior Member
 
marinetrader's Avatar
 
Join Date: Oct 2007
Posts: 301
Gel Coat Repairs

Do you have minor blemishes on your trawler's gel coat that could use a little work?*

Making those rerpairs is simple if you know what do do.

You can read how to do it at this webpage, Gel Coat Repairs made Simple
marinetrader is offline   Reply With Quote
Old 10-10-2011, 04:27 AM   #2
Guru
 
rwidman's Avatar
 
City: North Charleston, SC
Join Date: Sep 2010
Posts: 4,870
Gel Coat Repairs

I have 39 screw holes to fill where the flybridge cover used to attach and I also have some spider cracking to repair so I clicke on the article thinking "Great, here's how to do it."

Well, the article starts out well enough, talking about fiberglass and gelcoat, but quickly shifts to repairing with epoxy and ends with the statement "To complete the job, I prefer to paint the repaired area."

Not really what I was looking for.

I have a couple books and a DVD on order so I'll see what they have to say about it. In the meantime, I filled the holes with non-silicone caulk to keep the water out.


-- Edited by rwidman on Wednesday 12th of October 2011 06:06:36 AM
rwidman is offline   Reply With Quote
Old 10-11-2011, 03:06 AM   #3
FF
Guru
 
FF's Avatar
 
Join Date: Oct 2007
Posts: 22,553
RE: Gel Coat Repairs

"To complete the job, I prefer to paint the repaired area."


For any amateur this IS the best concept.
FF is offline   Reply With Quote
Old 10-14-2011, 08:35 AM   #4
Veteran Member
 
Penny Lane's Avatar
 
Join Date: Jun 2011
Posts: 46
RE: Gel Coat Repairs

Thinking about 39 screw holes....

Use a paper punch to make a hole in your favorite 2 or 3" masking tape.* Repeat 38 times.* This will make masking off the 39 sites easier.*

If the hole punch is too small, you might be able to run an electric drill bit through a role of tape and get any size hole you want, about one every 10" or so.

cheers
Penny Lane is offline   Reply With Quote
Old 10-14-2011, 08:54 AM   #5
Guru
 
jleonard's Avatar
 
Join Date: Jun 2008
Posts: 5,037
RE: Gel Coat Repairs

If using epoxy I paint the finish.

If using polester (or vinylester) resin or Bondo I gelcoat.

Just my preference from what I have read and practised.

*
jleonard is online now   Reply With Quote
Old 10-19-2011, 06:42 AM   #6
Guru
 
rwidman's Avatar
 
City: North Charleston, SC
Join Date: Sep 2010
Posts: 4,870
RE: Gel Coat Repairs

I bought two or three booklets and a DVD on fiberglass and gelcoat repairs from defender.com. I think they are West System products.

Anyway, they seem like a good start for anyone who wants to try their hand at repairs. I'm not saying one would be an expert after reading the booklets and watching the DVD, but it's a place to start.
rwidman is offline   Reply With Quote
Old 10-19-2011, 12:02 PM   #7
Guru
 
skipperdude's Avatar
 
City: Whittier AK
Vessel Name: Apache II
Vessel Model: 1974 Donald Jones
Join Date: Oct 2007
Posts: 3,147
Gel Coat Repairs

It's matching the color that is the hard part. Did you ever see them match paint at the hardware Store?

A little red some blue a dash of yellow. Just to get white.

Repairing the hole is the big issue.**

The best I have seen is to drill out the hole thru to the inside. Next using a bent nail or an allan wrench wobble (Is this a word) out the hole. next tape the hole on the inside *then fill with resin to form a disk shaped plug under the fiber glass skin. Then redrill for what ever attachment you desire or sand smooth and match the color and apply gelcoat.

Like I said matching the color is the hard part. Trial and error is the only way to get it right.

You can't just use the factory color because of time and *UV.**It changes the origional color

SD*


-- Edited by skipperdude on Wednesday 19th of October 2011 01:03:27 PM
skipperdude is offline   Reply With Quote
Old 11-10-2011, 07:55 AM   #8
TF Site Team
 
koliver's Avatar
 
City: Saltspring Island
Vessel Name: Retreat
Vessel Model: C&L 44
Join Date: Nov 2007
Posts: 5,663
Gel Coat Repairs

I have recently removed some fittings that were screwed to the flybridge outer fibreglass surface, leaving unsightly screw holes. to repair, I bought a can of white gelcoat (no chance to colour match, as the store had only one kind of "white"). Using a countersink bit, I cut away all of the fractured gelcoat around the screw holes, leaving a bevel. Mixed a small amount of gelcoat with a thickener, I had some "short fibre" stuff that worked well, and filled to level. That stuff shrunk a bit, so in some I gave it a second coat with thickener. In all, I gave them a coat, or two, of unthickened gelcoat. clean off with a razorblade or a sharpened scraper before the new gelcoat hardens completely. In some that was all I needed to do, as the razor edge was sharp enough to leave a shiny surface. In others, a little samding with 2000 wet/dry, then polish. Mostly they have disappeared, unless you know exactly where to look, and your colour discrimination is good enough to see the difference. On a 31 yr old surface, I am happy with the results. Takes some time, but well worth the effort.* Didn't use more than 10% of the gelcoat in the smallest can I could buy, so lots left for any other projects that come along before it hardens up in the can.


-- Edited by koliver on Thursday 10th of November 2011 09:57:51 AM
koliver is offline   Reply With Quote
Old 07-03-2016, 12:28 PM   #9
Veteran Member
 
City: Rockport, Ontario
Vessel Model: 1986 Oceania 35 Sundeck
Join Date: Oct 2015
Posts: 76
Thanks KOliver. I think I'm going to try that on my 1986 white? Gel coat. 😎


Sent from my iPad using Trawler Forum
Oceania is offline   Reply With Quote
Old 07-04-2016, 06:35 AM   #10
FF
Guru
 
FF's Avatar
 
Join Date: Oct 2007
Posts: 22,553
" (no chance to colour match, as the store had only one kind of "white")"

Oil paint pigment can be added to change color , but the color of gel coat changes as it dries , and there is a color change in old gel coat that is hard to match.

It tales a true artist with loads of experience to get a near color match.

Off color pimples may look better than raw holes , and stop a leak.
FF is offline   Reply With Quote
Old 07-04-2016, 06:58 AM   #11
TF Site Team
 
Bacchus's Avatar
 
City: Seneca Lake NY
Vessel Name: Bacchus
Vessel Model: MS 34 HT Trawler
Join Date: Nov 2014
Posts: 7,826
I've found a few pieces of clear mylar helpful for gelcoat patches.

Mix the gelcoat on a piece placed over the existing gelcoat and you can easily see how close the colors match.

Also cut a piece slightly larger than the patch area and hinge it w a piece of masking tape. After filling and leveling the new GC place the mylar over the new GC...you get the smooth surface finish of the mylar transferred to the patch.

If needed finish w 3000grit wet&dry then compound.
__________________
Don
2008 MS 34 HT Trawler
"Bacchus"
Bacchus is offline   Reply With Quote
Old 07-04-2016, 07:53 AM   #12
Senior Member
 
Join Date: Aug 2008
Posts: 265
Should you use mold release or wax on the mylar so it doesn't stick?
Or is mylar slick enough?
folivier is offline   Reply With Quote
Old 07-04-2016, 05:19 PM   #13
TF Site Team
 
Bacchus's Avatar
 
City: Seneca Lake NY
Vessel Name: Bacchus
Vessel Model: MS 34 HT Trawler
Join Date: Nov 2014
Posts: 7,826
Quote:
Originally Posted by folivier View Post
Should you use mold release or wax on the mylar so it doesn't stick?
Or is mylar slick enough?
I never had to add anything...it comes off clean
__________________
Don
2008 MS 34 HT Trawler
"Bacchus"
Bacchus is offline   Reply With Quote
Old 07-04-2016, 06:22 PM   #14
Guru
 
rwidman's Avatar
 
City: North Charleston, SC
Join Date: Sep 2010
Posts: 4,870
My boat is a light beige or almond, not white. As it sits in the sun, the color fades and it's pretty obvious where the surface is protected from the sun. To get the best match if you are making a repair, you should wet sand, then compound the area. Try to match that.


Of course, the repaired area will not be a good match until you've wet sanded and compounded the entire boat.
rwidman is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Repairs so far this year timjet General Discussion 48 10-21-2011 02:11 PM
Older ITT night scope repairs Keith Electrical and Electronics & Navigation 0 06-01-2010 12:12 PM

» Trawler Port Captains
Port Captains are TF volunteers who can serve as local guides or assist with local arrangements and information. Search below to locate Port Captains near your destination. To learn more about this program read here: TF Port Captain Program





All times are GMT -5. The time now is 12:14 PM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2006 - 2012