Reply
 
Thread Tools Display Modes
 
Old 03-28-2016, 08:25 PM   #21
Guru
 
Xsbank's Avatar
 
City: Pender Harbour, BC
Country: Canada
Vessel Name: Gwaii Haanas
Vessel Model: Vancouver Shipyards Custom Aluminum 52
Join Date: Sep 2013
Posts: 2,447
Take your Dremel or grinder and cut a slot in the bolt so you can put a large screwdriver in it to hold it while you undo the nuts.
__________________
Advertisement

__________________
Don't believe everything that you think.
Xsbank is offline   Reply With Quote
Old 03-29-2016, 07:37 AM   #22
Guru
 
Shoalwaters's Avatar
 
City: Rodney Bay Lagoon
Country: St. Lucia, West Indies
Vessel Name: "Dragon Lady"
Vessel Model: DeFever 41
Join Date: Feb 2008
Posts: 681
Quote:
Originally Posted by Xsbank View Post
Take your Dremel or grinder and cut a slot in the bolt so you can put a large screwdriver in it to hold it while you undo the nuts.
Yup! And, since the OP has already got a little movement on the nut, slight rotation back and forth - say 10 degrees, with plenty of penetrant. Stops the rust dust from binding in the threads.
__________________

__________________
Mike
If all else fails, read the instructions
If it ain't broke, don't fix it
Shoalwaters is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off





All times are GMT -5. The time now is 01:37 AM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2006 - 2012