Comodave
Moderator Emeritus
- Joined
- Jul 2, 2015
- Messages
- 21,407
- Location
- Au Gres, MI
- Vessel Name
- Black Dog
- Vessel Make
- Formula 41PC
The PO of my boat put multiple coatings on the props and shafts. I have no idea what the coatings are but they are flaking off badly and have left a very rough surface on the props. I am going to have them scanned to see how true they are. I have some minor vibrations on the starboard side at higher RPMs. The prop shop sent me a puller but it would walk off the end of the shaft repeatedly. So I made my own puller that worked very well. I used 3/8” steel plate and 5/8” grade 8 bolts. I also had to buy a 24” adjustable wrench in order to remove the 2 1/2” prop nuts. Interesting that the port shaft is left hand thread... guess how long it took to figure that out. My keys and keyway are also different than I expected in that the keys are rounded on both ends and the keyway fits the keys exactly. I have not been able to remove the keys from the shaft so far. I am going to take the props in next week.
Attachments
-
4FC7906A-42EB-4810-A160-5771B4EC8228.jpg120.4 KB · Views: 80
-
32243C20-80AD-42A3-AD84-69DF718875C0.jpg123 KB · Views: 78
-
8B62C4F1-F263-451C-B1D3-86D4DF2082C9.jpg187.2 KB · Views: 92
-
DD5890CF-2C75-4989-BD22-D99B9A5699F3.jpg75.3 KB · Views: 88
-
A121AF68-FFFB-466B-93B4-602F2D1B2AC2.jpg106.7 KB · Views: 89