Metal compression fitting

[psneeld]

Side feed injector and the pump is much lower air would guess.

 

[Yobbo]

If no one is going ask... I will. Why is there a line *under* the injector?

A return line? And if it is there shouldn't be to much pressure

 

[Donna]

It needed a weld and yes there is a return line. I have a friend that welds and lucky for me an engine guy who was able to re-install it before the boat parade.

I was just too busy with work and the Christmas season to fix it myself. Some things I would rather just pay for. Thank goodness for friends!

 

[North Baltic sea]

In general, if the copper seals they must always be replaced, or heated to a red-hot because as they get harder and tightening the connection is leaking.