Reply
 
Thread Tools Search this Thread Display Modes
 
Old 08-26-2018, 08:08 AM   #1
Newbie
 
City: Boca Raton
Join Date: Mar 2018
Posts: 3
high gloss finish

Hi and thanks in advance for any words of wisdom....better yet experience. Just compounded our new to us fiberglass boat....probably first time done in 5 years. What with all the new tech out there, what have you found to be the best product for producing a high-gloss finish? Don't want to get into two-part epoxies and the like. Have heard about new "waxes", but have found those to more hype than results. Because of the surface area, trying not to use a buffer. Any suggestions? Again.....thanks for taking the time to share your thoughts.
bound4bvi is offline   Reply With Quote
Old 08-26-2018, 10:10 AM   #2
Guru
 
City: Galveston, Texas
Vessel Model: 24" El Pescador
Join Date: Nov 2014
Posts: 744
I have no first hand knowledge but have read some great reports (and a few less than great) on applying a "ceramic" coating. Thee are a few different kinds and some think (of course) that one is netter than others. Here is one link but there are many to look at if you Google a bit.


https://www.thehulltruth.com/liquid-...ing-boats.html
__________________
Ken Diestler
Galveston, Tx
ktdtx is offline   Reply With Quote
Old 08-29-2018, 01:31 PM   #3
Guru
 
Maerin's Avatar
 
City: East Coast
Vessel Name: M/V Maerin (Sold)
Vessel Model: Solo 4303
Join Date: Jun 2013
Posts: 886
Quote:
Originally Posted by bound4bvi View Post
Hi and thanks in advance for any words of wisdom....better yet experience. Just compounded our new to us fiberglass boat....probably first time done in 5 years. What with all the new tech out there, what have you found to be the best product for producing a high-gloss finish? Don't want to get into two-part epoxies and the like. Have heard about new "waxes", but have found those to more hype than results. Because of the surface area, trying not to use a buffer. Any suggestions? Again.....thanks for taking the time to share your thoughts.

The finish you achieve is directly proportional to the effort you put into it. There are no shortcuts. Products that promise quick shine may produce it, but it won't last very long. The high gloss, "wet" look only comes from making the surface smooth. The buffer is key in that process. Particularly when considering the surface area... not sure what the reasoning for "trying not to use a buffer", but it's contrary to the stated objective.

Oxidation creates micro-fissures in the surface of the gelcoat. They create more surface area for oxidation to occur, and the only way to eliminate that is by removing the top micro layer of gelcoat to create as smooth a surface as possible. Abrasion is how it's done. The higher the polish you bring to the surface, the more it shines, the more UV it reflects, and the longer it will last. Wax creates a shine by filling in those micro fissures, but the wax soon is oxidized, returning the surface to its original dull appearance. Paint also restores shine by filling in the fissures, but it won't oxidize as quickly so the shine lasts many years.
__________________
Steve Sipe

https://maerin.net
Maerin is offline   Reply With Quote
Old 08-29-2018, 02:30 PM   #4
Guru
 
caltexflanc's Avatar
 
City: North Carolina for now
Join Date: Aug 2011
Posts: 6,348
I had great success using Rejex, a polymer sealer. There are similar products from Zaino and StarBrite that get good comments. Key is to have the surface clean and shiny to begin with, then apply. First time around the yard used a glaze, 3M Finesse-It II, Every couple if years got a touch up, and the boat was used year around in saltwater. Pretty much eliminate the so-called "ICW Mustache" and other tannin stains if you hosed the boat off every and then (we spent a lot of time living on moorings and at anchor).
It was all kind of overkill, since the hull was painted rather than gelcoat, but it sure looked good! Here's a pic after about a year of cruising the entire eastern seaboard down and back again , anchoring or mooring 70% of the time, notice the reflection twinkling off the bow, you could pretty much shave using it as a mirror...

__________________
George

"There's the Right Way, the Wrong Way, and what some guy says he's gotten away with"
caltexflanc is offline   Reply With Quote
Old 08-29-2018, 03:43 PM   #5
Senior Member
 
City: South Louisiana
Join Date: Oct 2017
Posts: 100
I have had ceramic coating on my center console for about 6 months. Cant say i'm totally convinced that it is all they say it is
latravcha is offline   Reply With Quote
Old 09-02-2018, 02:44 PM   #6
Senior Member
 
SailorGreg's Avatar
 
City: Newport
Vessel Name: Privateer
Vessel Model: Kadey Krogen 52
Join Date: Jun 2014
Posts: 177
I have come full circle and am back to paste wax. 3m Ultra. A bit more work than the Teflon/ nano stuff, but lasts a lot longer and gives a deeper shine. Never tried the “ceramics”.
SailorGreg is offline   Reply With Quote
Old 09-03-2018, 06:47 AM   #7
Guru
 
caltexflanc's Avatar
 
City: North Carolina for now
Join Date: Aug 2011
Posts: 6,348
Quote:
Originally Posted by SailorGreg View Post
I have come full circle and am back to paste wax. 3m Ultra. A bit more work than the Teflon/ nano stuff, but lasts a lot longer and gives a deeper shine. Never tried the “ceramics”.
Like anything else, it's all in the prep and application.

By the way, Rejex works great on stainless and aluminum too. One of it's biggest uses is to preserve the shine on custom and high end car and truck wheels.
__________________
George

"There's the Right Way, the Wrong Way, and what some guy says he's gotten away with"
caltexflanc is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


» Trawler Port Captains
Port Captains are TF volunteers who can serve as local guides or assist with local arrangements and information. Search below to locate Port Captains near your destination. To learn more about this program read here: TF Port Captain Program





All times are GMT -5. The time now is 09:26 AM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2006 - 2012