adjusting rollers on salon sliding door

[ddalme]

Have a '83 Atlantic 30 (sistership of the Prairie 29). Have tried to remove the door to adjust the bottom rollers and for the life of me, can not see a way to lift it off the track. Anyone know the secret of removing the door? Hope I don't have to remove the whole back glass frame.

 

[dimer2]

Have a look at the lower door edge and see if there is an access hole about an inch from the door bottom. Normally it takes a long allen key to reach the adjustment screw, which lowers/drops the roller assembly.

 

[ddalme]

I saw that hole but it didn't dawn on me to try an allen wrench-Thanks Blue

 

[GFC]

I replaced the rollers on mine a few years back. I had to remove the fixed panel before I could move the sliding panel far enough to the opposite side to remove it and gain access to the rollers.