Thread Tools Display Modes
Old 06-01-2010, 06:38 PM   #1
Keith's Avatar
Vessel Name: Anastasia III
Vessel Model: Krogen 42
Join Date: Oct 2007
Posts: 2,716
Splendide W/D error codes

My Splendide W/D has been acting up. The dial where you select the cycle will start clicking around and around and the machine stops at whatever point it's at.* I called the mfg and they let me know that the internal diagnostics of the machine do that when it detects an error. Sounds like a computer, eh? Anyway, when it's doing this, the red light on the*right will blink to give you the error code. There will be a long pause, then it will blink in sequence some number. Mine was giving me a 5 and a 13. The 13 indicated an overheat during the dry cycle. I was behind in my annual cleaning of the dryer exhaust hose and it was clogged about 50% at the bottom bend. The five shows the pump is not working as well as it should. I took out the "filter" plug and there wasn't really anything in there but a little crud. It's meant to catch paper clips, etc. Just an FYI to get these error numbers before you call tech support.

-- Edited by Keith on Tuesday 1st of June 2010 07:39:56 PM
Keith is offline   Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
Webasto heater error Chris Foster Other Trawler Systems 11 10-28-2008 06:23 PM
Threat and error management Baker General Discussion 9 07-16-2008 02:58 AM

All times are GMT -5. The time now is 07:24 AM.

Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2016, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2006 - 2012