db2
Veteran Member
I would like to install a flush deck pump out fitting on the deck just outside the door on the starboard side. I started by drilling a 1/4" pilot hole up through the floor from the engine room. The bit went all the way through the floor but did not emerge on the deck outside the door. Closer inspection reveals that there is a 10" void between the floor and the deck. There does not appear to be an easy way to get into this void. I guess I could cut a largish hole on the floor so that the pump out hose could be passed up through the hole to connect to the deck fitting. What have others done?
Thanks,
Dan
Thanks,
Dan