|
|
09-24-2014, 09:44 PM
|
#1
|
Veteran Member
City: Woodcliff Lake
Vessel Name: SE Drifter
Vessel Model: Sisu 30
Join Date: Sep 2012
Posts: 43
|
suggestions condensation problem?
Having just finished covering my berth hull walls with white oak paneling, I have become acutely aware of a condensation problem in my fiberglass Sisu. The condensation literally drips off the 1/4" thick 10" high vertical transition from the thicker 1-1/4" bow deck and adjoining gunwales. My boat is up in Alaska and when the interior space is warmer than the exterior, the oak, yet to be sealed and finished, gets pretty wet. My plan at the moment is to cover the interior ceiling surfaces, including the thinner 1/4" step sections, with synthetic carpet tiles. I'm hoping that the carpet will create a thermal break and stop the condensation. That being said, I am altogether open to any suggestions.
|
|
|
09-24-2014, 09:47 PM
|
#2
|
Moderator Emeritus
City: SEWARD ALASKA
Vessel Name: DOS PECES
Vessel Model: BAYLINER 4788
Join Date: Feb 2011
Posts: 6,267
|
I am in Alaska and have seen and experienced what you are talking about.
Ventilate your boat and the problem will go away.
|
|
|
09-24-2014, 09:58 PM
|
#3
|
Veteran Member
City: Woodcliff Lake
Vessel Name: SE Drifter
Vessel Model: Sisu 30
Join Date: Sep 2012
Posts: 43
|
why didn't I think of that?! Do you think a passive vent will work, or something with a fan? If you're able to suggest a specific vent, I'll look into it. Thanks!
|
|
|
09-24-2014, 11:54 PM
|
#4
|
Guru
City: Gooding ID/Wrangell AK
Vessel Name: Silver Bay
Vessel Model: Nordic Tug 42-002
Join Date: Sep 2012
Posts: 1,040
|
I agree with Kevin to a point. When the fiberglass is both an interior and exterior wall and you are sleeping in the area, its difficult to get enough ventilation to prevent all moisture. In our forward V-berth and aft master stateroom, we get condensation on the area where the interior walls are uninsulated and attached directly to the outside fiberglass no matter how many windows are open. I have solved the issue in the main cabin for the most part using insulation on top of the paneling. I am still debating what to do long term. In the v-berth, I intend to coat the interior fiberglass with a product called Mascoat. I used it in a C-Dory and it cut condensation inside by better than 90% after 3 nights in the rain with the windows cracked and the cabin door open. The same situation without the Mascoat saw everything inside damp with visible water on all the fiberglass services. To dry the inside, I ran the heater almost constantly. As an insulating layer it did exactly what the manufacturer said it would.
Tom
|
|
|
09-25-2014, 12:04 AM
|
#5
|
Moderator Emeritus
City: SEWARD ALASKA
Vessel Name: DOS PECES
Vessel Model: BAYLINER 4788
Join Date: Feb 2011
Posts: 6,267
|
Quote:
Originally Posted by steelguy
why didn't I think of that?! Do you think a passive vent will work, or something with a fan? If you're able to suggest a specific vent, I'll look into it. Thanks!
|
We used the Vetus power vents with great success. They draw almost no power and work much better than the solar units with battery backup here in Alaska.
|
|
|
09-25-2014, 12:10 AM
|
#6
|
Moderator Emeritus
City: SEWARD ALASKA
Vessel Name: DOS PECES
Vessel Model: BAYLINER 4788
Join Date: Feb 2011
Posts: 6,267
|
Quote:
Originally Posted by tpbrady
I agree with Kevin to a point. When the fiberglass is both an interior and exterior wall and you are sleeping in the area, its difficult to get enough ventilation to prevent all moisture. In our forward V-berth and aft master stateroom, we get condensation on the area where the interior walls are uninsulated and attached directly to the outside fiberglass no matter how many windows are open. I have solved the issue in the main cabin for the most part using insulation on top of the paneling. I am still debating what to do long term. In the v-berth, I intend to coat the interior fiberglass with a product called Mascoat. I used it in a C-Dory and it cut condensation inside by better than 90% after 3 nights in the rain with the windows cracked and the cabin door open. The same situation without the Mascoat saw everything inside damp with visible water on all the fiberglass services. To dry the inside, I ran the heater almost constantly. As an insulating layer it did exactly what the manufacturer said it would.
Tom
|
Hi Tom, I'm trying to remember if we've met in person? (getting old, sorry).
I will add that even with ventilating I sometimes got "wet bunk" where the bunk laying on a cold surface seemed to collect moisture.
I solved that issue with pink hard foam insulation from Home Depot. I put that under the mattresses and never a wet bunk again.
I will also agree with you that the transition times, where it is too warm to run the heater, yet cold and rainy outside are the hardest to deal with.
We have four large dogs, plus people, and sometimes I've ran the heat on low with the door open just to keep things from getting moist inside.
|
|
|
09-25-2014, 09:28 AM
|
#7
|
Guru
City: Seabrook Texas
Vessel Name: TheVenture
Vessel Model: 1985 Bestway Labelle Sundeck 40ft
Join Date: May 2013
Posts: 560
|
The problem is basic. Wet air meets with cold surface. To prevent condensation you have basically two choices.
1. prevent or control wet air from entering the boat
2. eliminate the cold surface.
Drying the air entering the boat is the most difficult.
Insulating the cold surface is the easiest.
What I have done to solve the problem is a combination.
I run a dehumidifier constantly and have glued foam insulation to much of the hull inside my boat.
Good luck guys.
|
|
|
09-25-2014, 09:30 AM
|
#8
|
Senior Member
City: Olympia, WA
Vessel Name: Sea Eagle
Vessel Model: Nordhavn 47
Join Date: May 2012
Posts: 201
|
Quote:
Originally Posted by ksanders
I will also agree with you that the transition times, where it is too warm to run the heater, yet cold and rainy outside are the hardest to deal with.
|
Hi Kevin,
Have you ever tried running a dehumidifier inside the boat (when you have shore power)? I run a larger, low-temperature unit on a timer during our wet months (we have a LOT of wet months) and it keeps the humidity down to 50% on the boat. Most of the low temp versions will work down to 40° or so before they freeze up.
An hour+ each morning seems to dry up the boat, even after showers and sleeping.
__________________
Scott (Boydski) Boyd
Yes Please, Grand Banks Eastbay
Sea Eagle, Nordhavn 47 (sold)
|
|
|
09-25-2014, 09:44 AM
|
#9
|
Guru
City: gulf coast
Join Date: Jun 2014
Posts: 3,440
|
People breathing and sweating and cooking add a lot of water to the air. I wonder if some method of exhausting hot humid air while adding dry heat might help.
I always suspected that insulation just hid the problem unless something stopped the damp air from touching the cold surface.
I use a dehumidifier in FL to reduce humidity without running the HVAC all the time. It does seem to work but the range of operating temps seems limited. But I guess if you are living aboard the temps are OK.
|
|
|
09-25-2014, 10:24 AM
|
#10
|
Guru
City: Seabrook Texas
Vessel Name: TheVenture
Vessel Model: 1985 Bestway Labelle Sundeck 40ft
Join Date: May 2013
Posts: 560
|
Quote:
Originally Posted by bayview
I always suspected that insulation just hid the problem unless something stopped the damp air from touching the cold surface.
|
You are right...It is very important that the insulation be next to the hull otherwise condensation develops behind the insulation. This is why I glue the insulation in place.
|
|
|
09-25-2014, 11:00 AM
|
#11
|
Guru
City: Hailing Port: Charleston, SC
Vessel Name: Moonstruck
Vessel Model: Sabre 42 Hardtop Express
Join Date: Nov 2008
Posts: 8,276
|
Ventilation
insulation
dehumidification
|
|
|
09-25-2014, 11:47 AM
|
#12
|
Guru
City: gulf coast
Join Date: Jun 2014
Posts: 3,440
|
Quote:
Originally Posted by bayview
I always suspected that insulation just hid the problem unless something stopped the damp air from touching the cold surface.
You are right...It is very important that the insulation be next to the hull otherwise condensation develops behind the insulation. This is why I glue the insulation in place.
Then I guess the insulation has to be water vapor proof like Styrofoam, not carpet or that pink batten stuff used in homes.
|
|
|
09-25-2014, 12:02 PM
|
#13
|
Guru
City: Hailing Port: Charleston, SC
Vessel Name: Moonstruck
Vessel Model: Sabre 42 Hardtop Express
Join Date: Nov 2008
Posts: 8,276
|
Quote:
Originally Posted by bayview
Quote:
Originally Posted by bayview
I always suspected that insulation just hid the problem unless something stopped the damp air from touching the cold surface.
You are right...It is very important that the insulation be next to the hull otherwise condensation develops behind the insulation. This is why I glue the insulation in place.
Then I guess the insulation has to be water vapor proof like Styrofoam, not carpet or that pink batten stuff used in homes.
|
If you are putting something like spun fiberglass insulation against the hull with no ventilation between, You should seal the inside with something less than one perm. Like 4 mil. poly. The condensation migrates to the outside.
|
|
|
09-25-2014, 01:27 PM
|
#14
|
Guru
Join Date: Oct 2007
Posts: 22,553
|
With or with out insulation the water will condense when it gets cold enough.
If the center of your insulation is the spot , thats where the water will form.
Big hassle in a wooden boat , only a minor hassle in a plastic boat.
Use ceiling to keep the water away from view and set up simple gravity drains to lead the water down to where it can be pumped.
Just try to drain it into the bilge NOT over the AC or noisemaker.
|
|
|
09-25-2014, 01:41 PM
|
#15
|
Moderator Emeritus
City: SEWARD ALASKA
Vessel Name: DOS PECES
Vessel Model: BAYLINER 4788
Join Date: Feb 2011
Posts: 6,267
|
Quote:
Originally Posted by Boydski
Hi Kevin,
Have you ever tried running a dehumidifier inside the boat (when you have shore power)? I run a larger, low-temperature unit on a timer during our wet months (we have a LOT of wet months) and it keeps the humidity down to 50% on the boat. Most of the low temp versions will work down to 40° or so before they freeze up.
An hour+ each morning seems to dry up the boat, even after showers and sleeping.
|
I've thought about it, but using the furnace both with and without heat on works pretty good.
I might get a small one for the lower cabin areas. No real problems but for example a towel never seems to dry.
|
|
|
09-25-2014, 02:16 PM
|
#16
|
Senior Member
City: Olympia, WA
Vessel Name: Sea Eagle
Vessel Model: Nordhavn 47
Join Date: May 2012
Posts: 201
|
Quote:
Originally Posted by ksanders
I might get a small one for the lower cabin areas. No real problems but for example a towel never seems to dry.
|
I have my dehumidifier positioned so it blows dry air across the towel hooks, so they dry really fast!
The air intake for one of my heaters also picks up dehumidified air and blows it into the Master Head to dry it out. Keeps the mirrors from getting steamed up.
__________________
Scott (Boydski) Boyd
Yes Please, Grand Banks Eastbay
Sea Eagle, Nordhavn 47 (sold)
|
|
|
09-25-2014, 03:41 PM
|
#17
|
Guru
City: Ft Pierce
Vessel Name: Sold
Vessel Model: Was an Albin/PSN 40
Join Date: Oct 2011
Posts: 28,157
|
Quote:
Originally Posted by ksanders
I've thought about it, but using the furnace both with and without heat on works pretty good.
I might get a small one for the lower cabin areas. No real problems but for example a towel never seems to dry.
|
Yep...towels can be a pain...in the winter we had one of those oil filled radiator heaters next to the bed in the master stateroom.
After the first spring the SO made me bring it back all year as she loves it on low as a towel dryer/warmer. I gave up thinking it was ever leaving so I just hard wired it into an outlet.
|
|
|
09-26-2014, 06:40 PM
|
#18
|
Guru
City: Juno Beach, FL
Vessel Name: Takes Two
Vessel Model: Defever 49 RPH
Join Date: Jul 2011
Posts: 500
|
We run a full size dehumidifier in the engine room when condition are humid, it's amazing that overnight we can fill the 2 gallon container up.
Luckily we don't get dripping like many others do but again the dehumidifier is awesome...
|
|
|
09-27-2014, 12:14 PM
|
#19
|
Guru
City: I need a bigger boat!
Vessel Model: Cheetah 25' Powercat.
Join Date: Aug 2014
Posts: 925
|
Quote:
Originally Posted by steelguy
Having just finished covering my berth hull walls with white oak paneling, I have become acutely aware of a condensation problem in my fiberglass Sisu. The condensation literally drips off the 1/4" thick 10" high vertical transition from the thicker 1-1/4" bow deck and adjoining gunwales. My boat is up in Alaska and when the interior space is warmer than the exterior, the oak, yet to be sealed and finished, gets pretty wet. My plan at the moment is to cover the interior ceiling surfaces, including the thinner 1/4" step sections, with synthetic carpet tiles. I'm hoping that the carpet will create a thermal break and stop the condensation. That being said, I am altogether open to any suggestions.
|
I've got tin foil covered bubble wrap as insulation on my steel boat; very disappointing result. There's still lots of condensation forming behind the bubble wrap as it's very hard to get it to stick properly to the steel surface; even the tiniest air pocket will allow condensation to form.
The old trick of the trade was best: foam backed carpet stuck onto the surface.
I've been in a steel ocean cruising sail boat with this arrangement: not a drop of condensation, and the pile of the carpet keeps the humid air away from the cold surface...
Plus : it's cheaper than chips to buy.
__________________
Peter.
|
|
|
09-27-2014, 12:47 PM
|
#20
|
Veteran Member
City: Woodcliff Lake
Vessel Name: SE Drifter
Vessel Model: Sisu 30
Join Date: Sep 2012
Posts: 43
|
agree on carpet
thanks for all of the responses and suggestions, seems this condensation problem is not limited to thin wall fiberglass walls. The bow deck and the gunwales are thicker with fiberglass sandwich balsa core, which I'm guessing is the reason they do not sweat. With the commercial synthetic carpet tiles, which are mildew resistant that I have been looking into, the 24"x24" squares come with a 1/4" thick black foam backing. I'm guessing that backing, along with the carpet pile will provide the thermal break needed to do the trick. This passive approach, versus dehumidifying and heating, seems worth trying. Plus, it has the advantage of offering a visually acceptable finished surface.
|
|
|
|
|
Thread Tools |
Search this Thread |
|
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Trawler Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|