Reply
 
Thread Tools Search this Thread Display Modes
 
Old 01-09-2016, 03:20 PM   #1
Guru
 
C lectric's Avatar
 
City: Gibsons, B.C., Canada
Vessel Name: Island Pride
Vessel Model: Palmer 32'
Join Date: Oct 2007
Posts: 4,414
New 65' Coastal Craft Launch

I got to watch them launch the new, 2nd, 65 ftr. the other day. The last shot shows where it will stay for the next little while as they finish all the interior details and do sea trials.
That frees the shed to get working on #3.

#1 did not have the flybridge enclosure but other wise looks the same.

The tide this time was higher for #2 so less excitement. On the first, #1, the trailer high centred on the too abrupt change from parking lot to the actual ramp. They had to call in another tractor to push it in.
Then as the stern lifted the bow dropped into the gap between the gooseneck frames and put two little dings in the BEAUOOOOTIFUL bow. Not so this time. You can see where the fender is secured this time to hopefully prevent that happening. It did not.

The dings were fixed in due course but I did not get to see the work as , by then I was out playing on my wee vessel.

I get to watch much of the goings on with these boats since my boat is moored opposite them.
Attached Thumbnails
IMG_7814.jpg   IMG_7815.jpg   IMG_7816.jpg   IMG_7821.jpg   IMG_7831.jpg  

IMG_7832.jpg   IMG_7834.jpg   IMG_7835.jpg   IMG_7842.jpg   IMG_7845.jpg  

C lectric is offline   Reply With Quote
Old 01-09-2016, 04:42 PM   #2
Guru
 
Hawgwash's Avatar
 
City: Sidney
Join Date: Feb 2015
Posts: 2,258
Quote:
Originally Posted by C lectric View Post
I got to watch them launch the new, 2nd, 65 ftr...The tide this time was higher for #2 so less excitement.
Though the Mallards don't seem too impressed, it is a nice looking trawler.

Always fun to watch the first splash.
I've seen lots and hardly remember the many that went without a hitch.

My two favorite "NOOOOOOO!!!" moments came courtesy of the same builder on the Fraser River; both 70+ footers.

Episode 1;
Successful launch, moore, cork popping, back slapping, and on shore clapping, then time to cast off for a short move.
Bow away from the dock, move a few feet, boat shudders, lurches and shudders again as a still attached line pulls out an onboard cleat that won't fit through the hawse hole then snaps the line.
The span of time was seconds but the groan-clatter-bang seemed an eternity.

Episode 2;
Successful launch as above.
Fuel truck rolls hose to the boat and begins the big fill.
Time goes by, the smell of diesel spreads, a pump starts and begins transferring diesel from the bilge to the river.

Seems the connection from fill tube to tank wasn't as successful as the launch.
Hawgwash is offline   Reply With Quote
Old 01-09-2016, 06:18 PM   #3
Guru
 
Northern Spy's Avatar
 
City: Powell River, BC
Vessel Name: Northern Spy
Vessel Model: Nordic Tug 26
Join Date: Feb 2012
Posts: 4,075
Coastal Craft makes some sweet vessels. Trawlers? No. But certainly would be on the short list if I won a lottery.

Note to self: buy lottery tickets next time you buy fuel.
Northern Spy is offline   Reply With Quote
Old 01-09-2016, 06:23 PM   #4
TF Site Team
 
koliver's Avatar
 
City: Saltspring Island
Vessel Name: Retreat
Vessel Model: C&L 44
Join Date: Nov 2007
Posts: 5,663
Friend of mine was involved in the first order of a 65, then dropped out of that to get involved with the second, then...
At first the power was to be 3 Volvo IPS, to get the speed he wanted. Settled on 2 IPS and some weight reduction. Sounded like the design process is pretty complex, with the NA involved in every shift of gear, to keep the weight balanced. Looks like a very pretty boat once all those hurdles overcome.
koliver is offline   Reply With Quote
Old 01-09-2016, 10:21 PM   #5
GFC
Guru
 
City: Tri Cities, WA
Join Date: Nov 2012
Posts: 4,406
Beautiful boat but years ago I told my wife "If I EVER start drooling over a boat with a dark color hull, just shoot my dumb arse."
__________________
Mike and Tina
1981 Boston Whaler 13'
GFC is offline   Reply With Quote
Old 01-10-2016, 11:53 AM   #6
Guru
 
C lectric's Avatar
 
City: Gibsons, B.C., Canada
Vessel Name: Island Pride
Vessel Model: Palmer 32'
Join Date: Oct 2007
Posts: 4,414
They have used other colours so you may be safe[er].
C lectric is offline   Reply With Quote
Old 01-10-2016, 12:08 PM   #7
Guru
 
Hawgwash's Avatar
 
City: Sidney
Join Date: Feb 2015
Posts: 2,258
Quote:
Originally Posted by GFC View Post
Beautiful boat but years ago I told my wife "If I EVER start drooling over a boat with a dark color hull, just shoot my dumb arse."
How can you not like this?
Attached Thumbnails
Okisollo.jpg  
Hawgwash is offline   Reply With Quote
Old 01-10-2016, 12:39 PM   #8
Guru
 
cardude01's Avatar
 
City: Victoria TX
Vessel Name: Bijou
Vessel Model: 2008 Island Packet PY/SP
Join Date: Nov 2012
Posts: 5,290
Quote:
Originally Posted by Hawgwash View Post
How can you not like this?

What brand boat is this? Or is it a custom?
cardude01 is offline   Reply With Quote
Old 01-10-2016, 12:41 PM   #9
Guru
 
City: Hotel, CA
Join Date: Sep 2011
Posts: 8,323
Coastal Craft is a custom builder in Canada.

http://www.coastalcraft.com
__________________
Craig

It's easier to fool people than to convince them that they've been fooled - Mark Twain
CPseudonym is offline   Reply With Quote
Old 01-10-2016, 12:54 PM   #10
Guru
 
oscar's Avatar
 
City: Bethlehem, PA
Vessel Name: Lady Kay V
Vessel Model: 1978 Hatteras 53MY
Join Date: Oct 2015
Posts: 1,098
Quote:
Originally Posted by GFC View Post
Beautiful boat but years ago I told my wife "If I EVER start drooling over a boat with a dark color hull, just shoot my dumb arse."
True, although the person buying this one will probably be able to afford a humanized polishing rag.
__________________
https://ladykay.blog/
oscar is offline   Reply With Quote
Old 01-10-2016, 12:54 PM   #11
Member
 
City: Mercer Island
Join Date: Oct 2013
Posts: 7
These boats are great for the Northwest. All year boats. Lots of interior space with 360 degree views. Fast.

At 65' boats with a sky bridge, I wonder about stability from a comfort standpoint. The boat is intended to be light without ballast. With all that high weight, I would imagine it would be a bit of a roller coaster.

Does the dinghy store in the back deck area. Northwest boats need a dinghy if you really intend to enjoy the area.
Odysseus is offline   Reply With Quote
Old 01-10-2016, 01:06 PM   #12
Guru
 
Hawgwash's Avatar
 
City: Sidney
Join Date: Feb 2015
Posts: 2,258
Quote:
Originally Posted by cardude01 View Post
What brand boat is this? Or is it a custom?
I really should allow Ted answer but here is a teaser; scroll down to Okisollo.

Kleaman Marine Services
Hawgwash is offline   Reply With Quote
Old 01-10-2016, 02:56 PM   #13
GFC
Guru
 
City: Tri Cities, WA
Join Date: Nov 2012
Posts: 4,406
Quote:
Originally Posted by Hawgwash View Post
How can you not like this?
That one I like. The dark hulled ones (blue, black, etc.) show water spots too much.
__________________
Mike and Tina
1981 Boston Whaler 13'
GFC is offline   Reply With Quote
Old 01-10-2016, 05:46 PM   #14
Ted
Guru
 
Ted's Avatar
 
City: Campbell River
Vessel Name: Okisollo
Join Date: Apr 2012
Posts: 783
Quote:
Originally Posted by Hawgwash View Post
I really should allow Ted answer but here is a teaser; scroll down to Okisollo.

Kleaman Marine Services
That's OK Hawgwash, even appreciated.
I think Kleaman's notes haven't done too badly.

Ted
Ted is offline   Reply With Quote
Old 01-10-2016, 09:14 PM   #15
Guru
 
BandB's Avatar
 
City: Fort Lauderdale. Florida, USA
Join Date: Jan 2014
Posts: 21,449
I'm a huge fan of Greg Marshall, the Naval Architect and designer. He's a protege of Bill Garden. I think Coastal Craft's designs are very nice. I can't comment on their build, having never seen one. I hope they have lots of success.
BandB is offline   Reply With Quote
Old 01-11-2016, 10:47 AM   #16
Guru
 
MYTraveler's Avatar
 
City: West Coast
Join Date: Apr 2014
Posts: 1,790
Quote:
Originally Posted by Odysseus View Post
Does the dinghy store in the back deck area. Northwest boats need a dinghy if you really intend to enjoy the area.
The dinghy is "supposed" to go behind the enclosed flybridge, but probably not on this boat since it has no crane installed but does have railing that will get in the way. I agree about the necessity of a dinghy in the PNW (or really all of the pacific coast).
MYTraveler is offline   Reply With Quote
Old 01-11-2016, 11:02 AM   #17
Guru
 
BandB's Avatar
 
City: Fort Lauderdale. Florida, USA
Join Date: Jan 2014
Posts: 21,449
Quote:
Originally Posted by MYTraveler View Post
The dinghy is "supposed" to go behind the enclosed flybridge, but probably not on this boat since it has no crane installed but does have railing that will get in the way. I agree about the necessity of a dinghy in the PNW (or really all of the pacific coast).
The design is for it to go on the bridge. If you notice the one on their website, it has a crane there. Otherwise you'd have to go to the swim platform. We totally agree on the dinghy need in the PNW, on the Pacific Coast, and everywhere else. We wouldn't travel without one. Too much fun to be had.
BandB is offline   Reply With Quote
Old 01-11-2016, 01:06 PM   #18
Guru
 
MYTraveler's Avatar
 
City: West Coast
Join Date: Apr 2014
Posts: 1,790
Quote:
Originally Posted by Odysseus View Post
At 65' boats with a sky bridge, I wonder about stability from a comfort standpoint. The boat is intended to be light without ballast. With all that high weight, I would imagine it would be a bit of a roller coaster.
I would share your concerns, especially since it has a relatively narrow beam.

Definitely a nice looking boat though!
MYTraveler is offline   Reply With Quote
Old 01-11-2016, 01:37 PM   #19
Guru
 
BandB's Avatar
 
City: Fort Lauderdale. Florida, USA
Join Date: Jan 2014
Posts: 21,449
Quote:
Originally Posted by Odysseus View Post

At 65' boats with a sky bridge, I wonder about stability from a comfort standpoint. The boat is intended to be light without ballast. With all that high weight, I would imagine it would be a bit of a roller coaster.
.
I would expect it to have stabilizers and be quite fine with the height.

In terms of design, it carries some similar features to the Pacific Mariner/Westport 65', which is no longer manufactured. Both have a lot of utility for their size and are relatively narrow and designed for good performance. Very similar speeds. Obviously the IPS is a significant departure.
BandB is offline   Reply With Quote
Old 01-16-2016, 03:17 PM   #20
Guru
 
Join Date: Apr 2014
Posts: 1,288
I don't think the CC is a Trawler whatever that is and if it is how does IPS grab the trawler folks? This is not the first boat I have come across with IPS designated as or referred to as a trawler. I don't think the builders consider it a trawler. It is most likely a very nice power craft and will fit in with the multitude of competition at its price tag. The defining issue is probably the aluminum build.
eyschulman is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


» Trawler Port Captains
Port Captains are TF volunteers who can serve as local guides or assist with local arrangements and information. Search below to locate Port Captains near your destination. To learn more about this program read here: TF Port Captain Program





All times are GMT -5. The time now is 08:09 AM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2006 - 2012