Centerpoint
Member
Hi - and thanks in advnce for any help here.
1990 Marine Trader Trawler Aft Cabin;
I need to replace my black water holding tank & and need some info if it can be done while in the water or if the boat needs to be pulled out.
Reason being;
The tank is under the bow floor- with about 6" of it sticking-out into the bildge, where the hoses connect to it.
From what I see, it appears that it was built to slide out into the bildge, then out however in sliding it out that way it will only slide about 2 feet before being obstructed by a seacock and its handle- meaning of course the boat needs too be dry docked.
However- I am curious if that is the way to do it- OR is the other way, to remove the floor in the bow and take it out that way.
Thanks for any guidence.
Two more questions coming in another post(s) from this NEWBIE
1990 Marine Trader Trawler Aft Cabin;
I need to replace my black water holding tank & and need some info if it can be done while in the water or if the boat needs to be pulled out.
Reason being;
The tank is under the bow floor- with about 6" of it sticking-out into the bildge, where the hoses connect to it.
From what I see, it appears that it was built to slide out into the bildge, then out however in sliding it out that way it will only slide about 2 feet before being obstructed by a seacock and its handle- meaning of course the boat needs too be dry docked.
However- I am curious if that is the way to do it- OR is the other way, to remove the floor in the bow and take it out that way.
Thanks for any guidence.
Two more questions coming in another post(s) from this NEWBIE
