hmason
Guru
- Joined
- Aug 9, 2013
- Messages
- 2,766
- Location
- USA
- Vessel Name
- Lucky Lucky
- Vessel Make
- Pacific Mariner 65
In preparation for our trip north to CT, Magic is being hauled on Monday for routine bottom painting and inspection. Our main engine(s) seacocks are operable but getting stiff. I'm thinking that with the boat out of the water, I can simply apply grease to the rubber cone thru the top of the strainer and apply grease up through the bottom of the thru hull as well. Is it necessary to disassemble the whole contraption? It would also be easy to flush the seacock with fresh water and work it open and closed before greasing.
Interested your thoughts. Thanks, Howard
Interested your thoughts. Thanks, Howard