Interesting boats

The friendliest place on the web for anyone who enjoys boating.
If you have answers, please help by responding to the unanswered posts.
Per stats on sale page:

Geezz, not too shabby! – 1100 gallons fuel at approx. 6.4 nmpg = 6336 nautical miles with 110 gal (10%) fuel reserve… that’s at 7k; wonder the range at 6k?

Tanks
Fresh Water Tanks: Stainless steel (560 Gallons)
Fuel Tanks: (1100 Gallons)

Engine and Mechanical
Economical 135 hp Lugger L6414D diesel with John Deere block (4400 hrs) only burns 1.1 gallons an hour doing 7k @ 1350 rpm. Single lever Morris controls. Fuel filtration and transfer system. Halon fire suppression system. Dripless shaft gland. Trolling valve.

I like everything but the 5 foot draft. That probably isn't an issue in the NW.
 
Per stats on sale page:

Geezz, not too shabby! – 1100 gallons fuel at approx. 6.4 nmpg = 6336 nautical miles with 110 gal (10%) fuel reserve… that’s at 7k; wonder the range at 6k?

Tanks
Fresh Water Tanks: Stainless steel (560 Gallons)
Fuel Tanks: (1100 Gallons)

Engine and Mechanical
Economical 135 hp Lugger L6414D diesel with John Deere block (4400 hrs) only burns 1.1 gallons an hour doing 7k @ 1350 rpm. Single lever Morris controls. Fuel filtration and transfer system. Halon fire suppression system. Dripless shaft gland. Trolling valve.

:smitten: I hadn't even looked at the specs page!!
 
If you've ever wondered what kind of boat a billionaire from the mid DSC_4494.jpg

DSC_4498.jpg

4117145_2_20121127091253_0_0.jpg

4117145_2_20121025123900_17_0.jpgwest who could afford to buy one of the biggest boats in the world would buy if he didn't want to show off- here she is!
 
I'd guess... Old School Money! Not Nouveau riche!

My guess as well. That, and he must be the kind of guy who likes to go places to discover things, as opposed to the kind of guy who goes places and revels in his assumption that everybody envies him.
 
If you are tired of being cut off by "running shoe" drivers you might want to consider one of these. A bit unusual to see it on the Great Lakes as something called the Rush Bagot treaty prevents any warship going there and this one, heading to a museum needed special permission.

Now thats pretty cool!!
 
The Columbus ship replicas are back in Houma, Louisiana. Seems strange they were just here in Feb. 2010 Welcome again!
See post #835 Loafs and Fishes saw them, I believe in Michigan, in September.
 

Attachments

  • Columbus ships 2014.jpg
    Columbus ships 2014.jpg
    50.8 KB · Views: 101
Last edited:
Wow. Although, I can't say that I blame them for getting out of the Great Lakes. You sure want to be well south in case the gales of November come early. ;)
 
ImageUploadedByTrawler Forum1417136268.590629.jpgImageUploadedByTrawler Forum1417136318.872795.jpgImageUploadedByTrawler Forum1417136351.406569.jpg

Seen near Friday Harbor WA this summer. Russian banker I was told.
 
We saw A in Bellingham Bay the other month. I very much like the look of it. With its reverse-raked stem it reminds me of a modern interpretation of a WWI battle cruiser.
 

Attachments

  • image.jpg
    image.jpg
    109.4 KB · Views: 114
Last edited:
Found this while checking out Dutch Barge websites...it's a dang purdy, low windage, bilge keeled, ocean crossing capable 52' steel trawler available in kit form;


Trawler | Branson Boat Design Dutch Barges

$66,334.00 Canadian dollars for some of the steel. Not including shipping. Of course you would be better off buying the cutting files and having it cut locally. Then find a couple of welders and a helper, three months later you have a bare shell. That's when it really starts to cost big money.....Which is why most just buy a DD from China and go cruising.
 
$66,334.00 Canadian dollars for some of the steel. Not including shipping. Of course you would be better off buying the cutting files and having it cut locally. Then find a couple of welders and a helper, three months later you have a bare shell. That's when it really starts to cost big money.....Which is why most just buy a DD from China and go cruising.

Since when did logic enter the picture when admiring purdy boats :D :thumb:

Give the choice, money, and time (none of which I have to spare) I'd rather have that boat, built by my own hands and modestly appointed, than any big name *Bling* boat. But, then again, I kicked logic off the bus when we bought Badger!
 
It's a good looking boat, I'll give you that. I'd like to be in the position of suffering over the choice of that one or the DD.
 
75 Viking MY

interesting boat passed it on the ICW yesterday and then Viking had a open house when I got back to the Marina

this is hull number1
 

Attachments

  • 75vikingmy1.jpg
    75vikingmy1.jpg
    93.8 KB · Views: 104
  • 75vikingmy2.jpg
    75vikingmy2.jpg
    98.4 KB · Views: 104
  • 75vikingmy3.jpg
    75vikingmy3.jpg
    112 KB · Views: 106
  • 75vikingmy4.jpg
    75vikingmy4.jpg
    103.7 KB · Views: 94
  • 75vikingmy5.jpg
    75vikingmy5.jpg
    99.7 KB · Views: 104
More pics
 

Attachments

  • 75vikingmy6helm1.jpg
    75vikingmy6helm1.jpg
    111.2 KB · Views: 100
  • 75vikingmy7helm.jpg
    75vikingmy7helm.jpg
    109.4 KB · Views: 116
  • 75vikingmy8helm.jpg
    75vikingmy8helm.jpg
    72.7 KB · Views: 100
  • 75vikingmy9helm.jpg
    75vikingmy9helm.jpg
    110 KB · Views: 94
  • 75vikingmy10pltfrm.jpg
    75vikingmy10pltfrm.jpg
    127.3 KB · Views: 110
  • 75vikingmy11helm.jpg
    75vikingmy11helm.jpg
    113.1 KB · Views: 105
There is a steam powered launch called "ENA", which greatly resembles "The Florence" identified by jeffnick. Currently chartering in Melbourne, she was restored and operated as a private yacht by a group of wealthy Sydney businessmen, and was a joy to behold on the Harbor.
 
DSC_4526.jpg
Who built this beauty? I saw her yesterday in Ft. Pierce. She has the lines of an early model Cheoy Lee (most which had rotted away by 1980) AND a Durbeck. Left me scratching my head- thought you trawler experts might know. She's beautiful and in Bristol condition for sure. Kudo's to her owner.
Look a rubrail- exactly where they are supposed to be!!
 
Last edited:
View attachment 34995
Who built this beauty? I saw her yesterday in Ft. Pierce. She has the lines of an early model Cheoy Lee (most which had rotted away by 1980) AND a Durbeck. Left me scratching my head- thought you trawler experts might know. She's beautiful and in Bristol condition for sure. Kudo's to her owner.
Look a rubrail- exactly where they are supposed to be!!

Looks like a Cheoy Lee 47 SeaMaster, Bill Garden design.
 
Back
Top Bottom