fender holders

[Mark Savalla]

Hi, need fender holders for 6, 10"x25" fenders. My stanchions are 1.25" diam. I can only find 1 co. that makes hardware for that size and I would have to buy 6 individual holders. I have a wooden horizontal rail at the top and not a tube. Any suggestions? I would like to get 2 units that hold 3 fenders each. thanks.

 

[menzies]

http://www.trawlerforum.com/forums/s3/neat-idea-28057.html

 

[RT Firefly]

Greetings,
Mr. M. Mr. MS may be inquiring about these:

 

[menzies]

Ah, fender racks.

West Marine have these:

Triple Rack for Fenders 9"-11"dia. 13506886 1867STN
In stock online.
$182.99

Amazon:

https://www.amazon.com/Taylor-Made-...8&qid=1473445398&sr=1-12&keywords=fender+rack

 

[Mark Savalla]

Have wood rail on top. Will not fit hardware, thanks.

 

[Mark Savalla]

for 1" tubing, mine is 1.25" and top rail is wood. thanks

 

[menzies]

This is a better photo - I think these fit to the stanchion not the top rail?

https://www.amazon.com/Windline-FND...0_5?ie=UTF8&psc=1&refRID=HCM485RQK040ZRK1X2CB

 

[Nomad Willy]

The visability underway may suffer considerably.

 

[Mark Savalla]

This is a better photo - I think these fit to the stanchion not the top rail?

https://www.amazon.com/Windline-FND...0_5?ie=UTF8&psc=1&refRID=HCM485RQK040ZRK1X2CB

Thanks, but my tubing is 1.25", this one only takes 1". Thankyou.

 

[menzies]

Jaysus. Get yourself a dock box, put it on the swim platform and chuck them in there already!

 

[Steve]

Below are some pictures of a mock up I did to see about carrying them under the wooden handrail. the wood seen here is a 2"x4" in my shed. It works fine but they do tend to rock, not a big problem, one that could be solved by tying them a bit tighter. The cost, a few SS screw hooks and nylon cord.

 

[Steve]

Another alternative sitting on top of the gunnel, a hitch on to a stanchion on each end of the fender these are 1.25" stanchions, this works quite well!

 

[menzies]

Steve, would you clean those damn fenders already!

 

[HopCar]

Seadog makes a mount to use on 1-1/4" tubing. You might be able to use it to mount the fender holders.
Sea-Dog : Quality Marine, Industrial and Rigging Hardware

If you can't find them, I can probably get them for you.

 

[HopCar]

Here is another way to go.
MarQuipt ... A Reputation for Quality,Â*Service, and Reliability

I used to sell a lot of these. They are really high quality. You can mount one to a stanchion or mount horizontal tubes between stanchions and mount the rings to the horizontal tubes.

 

[HopCar]

Small thread drift, but a badly needed drift!
This is the hot ticket for cleaning fenders Marinestrip-Home
It works like acetone but doesn't remove the plasticizers.

 

[menzies]

Or buy black fenders!

 

[Mark Savalla]

Jaysus. Get yourself a dock box, put it on the swim platform and chuck them in there already!

Thanks ,i told my wife, she listens to other people.
ss

 

[Steve]

Steve, would you clean those damn fenders already!

Them's the clean ones!!

 

[hmason]

Small thread drift, but a badly needed drift!
This is the hot ticket for cleaning fenders Marinestrip-Home
It works like acetone but doesn't remove the plasticizers.

And like magic on power cords.

 

[mbevins]

Thanks, but my tubing is 1.25", this one only takes 1". Thankyou.

Yep. Go to a fab shop and have new larger custom mounting brackets made.

 

[Bacchus]

1-1/4" Rails