menzies
Guru
This just came through on my FaceBook feed. $14.
Has anyone used this?
https://esfranki.com/products/damaged-screw-extractor-set-of-4
Has anyone used this?
https://esfranki.com/products/damaged-screw-extractor-set-of-4
Umm. Yeah. Lots of times. Some things are better in principle.
For screws they work quite well.
But a stud extractor can make one either teary-eyed joyful or enraged.
If you think you were swearing when you had a broken bolt, just wait until you break off the hardened stud extractor in the broken bolt. New combinations and modifiers of previous swear words are quite typical.
I recently broke off an 8 mm. bolt on my VOLVO heat exchanger.
Greetings,
I don't know if anyone noticed but the device in the OP is a reverse twist drill or more accurately a reverse center drill.
Greetings,
I don't know if anyone noticed but the device in the OP appears to be a reverse twist drill or more accurately a reverse center drill.
Interesting. From the website: "Works on wood and machine screws as well as philips, flat, hex, or painted over screws. NO mention of Roberston drive fasteners...Either the manufacturer does not know what they are OR Roberstons seldom strip out.