Reply
 
Thread Tools Search this Thread Display Modes
 
Old 07-27-2019, 09:55 AM   #1
Member
 
City: Stuart
Country: United States
Join Date: Jul 2019
Posts: 5
AC for 2000 Mainship Pilot 30

I am purchasing a 2000 Mainship Pilot 30 without Air Conditioning. Can anyone tell me where the factory installed AC units and thru hulls were installed. The boat does appear to have an air vent on the port side cabinetry in the cabin.
Thanks Steve Dublin
Stuart Florida
__________________
Advertisement

steve Dublin is offline   Reply With Quote
Old 07-27-2019, 12:13 PM   #2
Senior Member
 
kwmeyer13's Avatar
 
City: Freeport, N.Y.
Country: USA
Vessel Name: Guns 'N' Hoses II
Vessel Model: 2004 34' Pilothouse Sedan
Join Date: Oct 2014
Posts: 184
On my 2004 34’ the interior layout is different but the intake is in the center bilge channel between the engines and the out is located on the starboard side just below the swim platform. Don’t know if this helps you.
__________________

__________________
Kevin
2004 Mainship 34 Pilothouse Sedan
Twin Yanmar 240's
Freeport, NY
kwmeyer13 is offline   Reply With Quote
Old 07-27-2019, 12:37 PM   #3
Guru
 
Comodave's Avatar
 
City: Au Gres, MI
Country: US
Vessel Name: Never Say Never
Vessel Model: President 41 DC
Join Date: Jul 2015
Posts: 5,084
Welcome aboard. You may have a problem doing an installation just like the factory install since they had an opportunity to run the duct work as the boat was put together. It will just take some innovation and thinking about ways to get the duct work in not only where you would like to but where you are able to get it in. It most likely will be doable just a bit of planning. Good luck.
Comodave is offline   Reply With Quote
Old 07-28-2019, 05:51 AM   #4
FF
Guru
 
FF's Avatar
 
Join Date: Oct 2007
Posts: 19,528
Plan B , Mitsubishi mini split? Pre-charged ready to run.


Plan C, RV rooftop 12,000 15,000 BTU?
FF is offline   Reply With Quote
Old 07-28-2019, 11:48 AM   #5
Member
 
City: Stuart
Country: United States
Join Date: Jul 2019
Posts: 5
Thanks all: I'm thinking of a self contained unit like I had in my 39' sail boat by maybe 8000 rather than 16000 BTU. I Should be able to place it on the port side of the engine compartment and run the duct work forward. Just wondering where the factory put the thru hull for the sea water intake?
Cheers Steve Dublin
steve Dublin is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off





All times are GMT -5. The time now is 10:29 AM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2006 - 2012