Reply
 
Thread Tools Search this Thread Display Modes
 
Old 09-08-2018, 05:35 PM   #1
Member
 
City: Portsmouth, RI
Join Date: Sep 2018
Posts: 7
110v Electrical Throughout

Hello all,


Looking at a potential boat for a liveaboard. One item I'd like some feedback on is the boat's electrical. When the boat got its last interior upgrade, the owner rewired the electrical for full 110v throughout. My understanding is that is lights and all. As most boats I have seen are 12v with some appliances on 110 through an inverter, I was wondering if this is ok for a boat or should it be cause for concern?


The generator is out and needs to be repaired (has been out since before the interior upgrade) so I am also not sure if there are other things I should be concerned about when getting the generator back online due to the full rewire to 110. Any idea on the average range of cost for a generator rebuild as worst case?



Thoughts? Not an issue or any red flags with this to be concerned about?


Of course, if I get serious well be bringing in a surveyor but wanted to get an initial read to see if its just something I should walk away from.


Thanks so much!


Regards,
Daniel
r1guy is offline   Reply With Quote
Old 09-08-2018, 05:43 PM   #2
Guru
 
Lou_tribal's Avatar
 
City: Quebec
Vessel Name: Bleuvet
Vessel Model: Custom Built
Join Date: Jan 2016
Posts: 4,375
For anything like basic needs (lights, pumps etc) I would use 12v as it would not requires any voltage conversion and so would be more efficient. In your case I guess it depends on what you have aboard, and if you plan to be mostly at anchor or at the dock with 110v connected.

L
Lou_tribal is offline   Reply With Quote
Old 09-08-2018, 05:44 PM   #3
Guru
 
O C Diver's Avatar
 
City: Fort Myers, FL... Summers in the Great Lakes
Vessel Name: Slow Hand
Vessel Model: Cherubini Independence 45
Join Date: Dec 2010
Posts: 12,834
How big a boat?

Ted
__________________
Blog: mvslowhand.com
I'm tired of fast moves, I've got a slow groove, on my mind.....
I want to spend some time, Not come and go in a heated rush.....
"Slow Hand" by The Pointer Sisters
O C Diver is offline   Reply With Quote
Old 09-08-2018, 05:53 PM   #4
Member
 
City: Portsmouth, RI
Join Date: Sep 2018
Posts: 7
Quote:
Originally Posted by Lou_tribal View Post
For anything like basic needs (lights, pumps etc) I would use 12v as it would not requires any voltage conversion and so would be more efficient. In your case I guess it depends on what you have aboard, and if you plan to be mostly at anchor or at the dock with 110v connected.

Initial plan is to dock for at least 1-2 years with weekend anchoring. Longer term, would love to be on a mooring during summers. But who knows if that would happen due to practicality of full time work on land.



Quote:
Originally Posted by O C Diver View Post
How big a boat?
Ted

The boat is 41ft, 14ft beam.


Daniel
r1guy is offline   Reply With Quote
Old 09-08-2018, 06:10 PM   #5
Guru
 
ben2go's Avatar
 
City: Upstate,SC
Vessel Name: Shipoopi
Vessel Model: derilic sailboat
Join Date: May 2012
Posts: 2,884
It sounds like the PO was planning the boat to be a dock darling and therefore would always be connected to shore power. If a boat is going to actually be used, it is more efficient to have as much as possible on DC and save the AC for stuff that can not be powered directly by DC. With technology today, it's possible to buy DC versions of almost everything except some large appliances like stoves, washer/dryer, and house size refrigerators. Converting AC back to DC is very inefficient and also generates heat. A lot of heat if the AC to DC converter is cheap and poorly made.



Another issue is that loud hot generator. It is really awful for everyone aboard and nearby to listen to it run all the time. Inverters, depending on their efficiency, will drain batteries fairly quickly when they are expected to handle all the electrical loads requiring the genny to be run often. Oversizing an inverter can be a bad thing. They also have a tendency to produce a lot of heat. The bigger ones can turn a small space into an oven.



I'm sure there are other factors as well. those are just the ones that immediately pop into my head.
__________________
This is my signature line. There are many like it but this one is mine.

What a pain in the transom.

ben2go is offline   Reply With Quote
Old 09-08-2018, 06:27 PM   #6
Valued Technical Contributor
 
DavidM's Avatar
 
City: Litchfield, Ct
Join Date: Aug 2012
Posts: 6,784
I would seriously doubt that the boat is 100% 110V AC. There are several things that can't be had in 110V: fresh water pump, bilge and shower sump pumps, most fans, etc.


And it will be impossible to hang out at anchor without a working genset or a substantial inverter with a large battery bank if it all is 110V.



So go through the electrical system and confirm if 110V or not. At a minimum I would change the lights to 12V leds in addition to those mentioned above that almost have to be 12V.


David
DavidM is offline   Reply With Quote
Old 09-08-2018, 06:29 PM   #7
Member
 
City: Portsmouth, RI
Join Date: Sep 2018
Posts: 7
Quote:
Originally Posted by ben2go View Post
It sounds like the PO was planning the boat to be a dock darling and therefore would always be connected to shore power. If a boat is going to actually be used, it is more efficient to have as much as possible on DC and save the AC for stuff that can not be powered directly by DC.

From the conversation I had, I do think it was intended to be a dockside condo. And while I expect to be at a dock ALOT for the first year or two I really want something I can have the option to have at anchor alot in the future. So, perhaps this one is not the boat for me. Id have to go into it knowing I may need to upgrade to another boat in the future.


Daniel
r1guy is offline   Reply With Quote
Old 09-08-2018, 06:45 PM   #8
Guru
 
Ka_sea_ta's Avatar
 
City: Puget Sound
Join Date: Jun 2016
Posts: 631
I would be concerned if the owner changed out anything the was originally 12 vdc. This would include lights, switches and fans. Its pretty difficult to run new wire in a living spaces in a boat.... just feeding existing DC switches with AC and changing out light fixtures with the existing DC wire does not provide a ground conductor to either the switch or the fixture...
Ka_sea_ta is offline   Reply With Quote
Old 09-08-2018, 07:07 PM   #9
Guru
 
High Wire's Avatar
 
City: Cape May, NJ
Vessel Name: Irish Lady
Vessel Model: Monk 36
Join Date: Dec 2007
Posts: 4,964
My alarm bells are ringing. The generator is out to be repaired? Changing all the lights over to 120 without an inverter means no lights at anchor. Did he rewire or take shortcuts by connecting the 12v wires to 120 and change the bulbs? What does the back of the power panels look like?
__________________
Archie
Irish Lady
1984 Monk 36 Hull #46
Currently in Cape May, NJ
High Wire is offline   Reply With Quote
Old 09-08-2018, 07:09 PM   #10
Guru
 
ben2go's Avatar
 
City: Upstate,SC
Vessel Name: Shipoopi
Vessel Model: derilic sailboat
Join Date: May 2012
Posts: 2,884
Quote:
Originally Posted by djmarchand View Post
I would seriously doubt that the boat is 100% 110V AC. There are several things that can't be had in 110V: fresh water pump, bilge and shower sump pumps, most fans, etc.


All those can be had in 110v AC. I have installed pumps in houseboats that match those. In this case, I doubt they are AC units.


And it will be impossible to hang out at anchor without a working genset or a substantial inverter with a large battery bank if it all is 110V.


Whole agree there.




So go through the electrical system and confirm if 110V or not. At a minimum I would change the lights to 12V leds in addition to those mentioned above that almost have to be 12V.



David



I would confirm those things voltages as well.
__________________
This is my signature line. There are many like it but this one is mine.

What a pain in the transom.

ben2go is offline   Reply With Quote
Old 09-08-2018, 07:14 PM   #11
Guru
 
psneeld's Avatar
 
City: Ft Pierce
Vessel Name: Sold
Vessel Model: Was an Albin/PSN 40
Join Date: Oct 2011
Posts: 28,146
Not enough info.

If every fixture on the boat was rewired to 110... Could be a problem.

If every fixture was replaced with a 110 fixture and rewired correctly...maybe no big deal if the lights are LED or can be converted.

12V lighting is simple enough to install...and usually better than where many manufactures place it anyway.

But without diagrams and phcs of the fixtures with wiring.... It's all a guess.
psneeld is online now   Reply With Quote
Old 09-08-2018, 10:59 PM   #12
Guru
 
dhmeissner's Avatar
 
City: Port Townsend
Vessel Name: The Promise
Vessel Model: Roughwater 35
Join Date: Sep 2012
Posts: 1,569
Agree, agree, agree. And oh yeah, run away.
dhmeissner is offline   Reply With Quote
Old 09-09-2018, 12:20 AM   #13
Guru
 
Pau Hana's Avatar


 
City: Seattle, WA
Vessel Name: Pau Hana
Vessel Model: 1989 PT52 Overseas Yachtfisher
Join Date: Aug 2012
Posts: 2,676
Too many unknowns- on to the next boat....
__________________
Peter- Marine Insurance Guru at Novamar Insurance Group (206-350-5051) & tuna fishing addict!

1989 52' PT Overseas yachtfisher
Pau Hana is offline   Reply With Quote
Old 09-09-2018, 12:34 AM   #14
Guru
 
Lepke's Avatar
 
City: Between Oregon and Alaska
Vessel Name: Charlie Harper
Vessel Model: Wheeler Shipyard 83'
Join Date: Jun 2016
Posts: 3,023
I live aboard and cruise. All my lights are 120v. The only 12v I use are radios, nav gear, emergency lights, and bilge pumps. I use an inverter that supplies 120/240 and it's on all the time unless at the dock. Having 120v and 240v appliances & lights are not a problem with a decent inverter and generator.
Lepke is offline   Reply With Quote
Old 09-09-2018, 03:33 AM   #15
Guru
 
BruceK's Avatar
 
City: Sydney
Vessel Name: Sojourn
Vessel Model: Integrity 386
Join Date: Oct 2011
Posts: 13,329
On an 83ft boat a 24/7 genset is unsurprising, on a 40 ft boat it sounds like a major inconvenience. There are reasons most things on a boat are 12v, complemented by "mains" type powered items supplied via shorepower, or genset as required when cruising. Departure from that triggers red flashing lights for me.

You would need a specialist electrical survey,depending how it really is set up. How well it was done would be part of the inquiry survey process. If you want to go cruising, I question if it is the boat you need.
__________________
BruceK
2005 Integrity 386 "Sojourn"
Sydney Australia
BruceK is offline   Reply With Quote
Old 09-09-2018, 04:49 AM   #16
Moderator Emeritus
 
Bay Pelican's Avatar
 
City: Chicago, IL
Vessel Name: Bay Pelican
Vessel Model: Krogen 42
Join Date: Oct 2007
Posts: 2,993
While you have repeatedly been advised to walk away from this boat, because of the difficulty of running an all 110v boat, it is unlikely that she is all 110v, and if she is it is inconceivable that someone rewired the boat correctly for all 110v.

You can check if the boat is all 110v by seeing if the there are leads from the battery going anywhere other than the inverter (engine starter?).

As to whether the boat has been correctly rewired 110v and 12v have different color codes, different number of conductors (wires) per outlet, and different required wire sizes. While 22 gauge wire is frequently used in 12v applications I question whether it is permitted in any 110v application. Bay Pelican had 1,000 feet of 18 gauge wire, almost all uses of 110v would have required this to have been pulled and replaced. To have been done correctly to pass future surveys almost every wire on the boat would have had to have been pulled and replaced.

Run, do not walk away.
__________________
Marty
Bay Pelican is offline   Reply With Quote
Old 09-09-2018, 05:33 AM   #17
FF
Guru
 
FF's Avatar
 
Join Date: Oct 2007
Posts: 22,553
Since the first 2 perhaps 3+ years will be dockside a mostly 120v boat will work best.

HOW it was converted to all 120 is of interest , but should not be a danger as 12V wiring is way oversized for 120V.

Batterys are getting better , inverters are getting better so in a few years you can decide if anchoring O'nite or long term living on the hook is your thing. Refrigeration is usually the stumbling block.

Sadly generators are expensive , but if there are no big power hogs like air cond -24/7 required a 4KW -6KW set should be enough , and if needed 24/7 operation may get more reasonable IF boat noisemaker assemblers copy the RV folks and install inverter sets that have variable speed engines.

How does the rest of the boat survey?
FF is offline   Reply With Quote
Old 09-09-2018, 07:09 PM   #18
Senior Member
 
Snapdragon III's Avatar
 
City: Kenmore
Vessel Name: Snapdragon
Vessel Model: Custom 56' Skookum trawler
Join Date: Sep 2016
Posts: 386
I would look for a different boat. Boats that were built/maintained perfectly are a huge amount of work to keep going, ones that were messed up during construction, or by a previous owner, are a nightmare.
Snapdragon III is offline   Reply With Quote
Old 09-17-2018, 06:05 PM   #19
Member
 
City: Dartmouth, NS
Join Date: Aug 2015
Posts: 14
110v Boat

I have a Mainship 430 wth a full size fridge/freezer, ice maker, and a bunch of A/C household appliances, gadgets, lights, table lamps, etc.
A couple of years ago we cruised about five hrs away from our yacht club to a popular anchorage to meet up with some friends in their boats for an overnight raft-up. Anchor down, rafted up, settling in with good friends, cocktails coming out, and Low Batt beeper comes on, so we start the genny. No water out of the exhaust indicates trouble. Shut it down, but engine room stifling from two Cats running for 5 hrs, so way to hot to attempt to replace the gen water pump impeller, so no recharging inverter batteries. No AC power and a five-hr run to get back to our dock and shore power. Not popular.
More recently, we went to a nice small harbour about six hrs away and settled in at a float alongside the main dock where we'd been told there was 50A power available. First problem was our 50 Ft 50 A power cord wouldn't reach the power panel, so we pulled out our backup 75 Ft 30 A cable thinking we could make do with no A/C, hot water or stove (all 240 V). The cable reached OK but we couldn't take the shore power. They'd had it rewired recently and installed GFIs on all their circuits. The shore pwr GFIs conflict with our on-board AC GFIs, so the shore pwr breakers trip as soon as pwr turned on to the boat electrical panel. No shore power meant running the genny for a couple of hours each morning before turning on the coffee maker and through the evening - every day. Same thing happens in our boat yard when we plug in to 20 A to run a de-humidifier and air circulators through the winter through our inverter in bypass mode.
All this to say AC boats have their drawbacks. Be aware.
bstew is offline   Reply With Quote
Old 09-17-2018, 07:05 PM   #20
Guru
 
Russell Clifton's Avatar
 
City: La Conner Wa.
Vessel Name: Sea Fever
Vessel Model: Defever 49 RPH
Join Date: Sep 2012
Posts: 877
If you need to call in a marine electrician to fix that generator, plan on about $125.00 per hour labor rate plus parts. If the generator needs to be replaced, about $7,000 to $10,000 for a 8kw generator plus labor to remove and install. As you can see, this is a major expense.

Easy enough to check what the voltage is on the lights. Unscrew a light bulb and see what voltage is marked on it. A quick check with a multi meter will tell you what voltage the pumps are. Or check the voltage at the electrical panel for the various items.
Russell Clifton is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


» Trawler Port Captains
Port Captains are TF volunteers who can serve as local guides or assist with local arrangements and information. Search below to locate Port Captains near your destination. To learn more about this program read here: TF Port Captain Program





All times are GMT -5. The time now is 07:56 AM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2006 - 2012