Reply
 
Thread Tools Search this Thread Display Modes
 
Old 10-18-2014, 03:11 PM   #1
Guru
 
seasalt007's Avatar
 
City: Punta Gorda, FL
Vessel Name: Aweigh
Vessel Model: Nordic Tug 42
Join Date: Jun 2014
Posts: 628
10 Minute Boat Project

I acquired this Blue Sea USB charger from Amazon ($12.25) with the intention of replacing an unused Perko two prong 12 v plug on my bridge console. The top port is for my iPhone and the bottom one for my Samsung Android Tablet that contains my back up navigation app.

When I removed the Perko plug I noticed that the hole in the console needs to be much bigger for the new gadget. That means a trip to the hardware store to get a 1 3/16" hole saw and taking a vac to the bridge to clean up the mess.

It proves to once again that there is no 10 minute boat project that doesn't take all day.

seasalt007 is offline   Reply With Quote
Old 10-18-2014, 03:16 PM   #2
Guru
 
hmason's Avatar
 
City: Stuart FL
Vessel Name: Lucky Lucky
Vessel Model: Pacific Mariner 65
Join Date: Aug 2013
Posts: 2,760
I recently installed a Whale Gulper shower drain pump. I estimated 1 hour for the job. It took me 2.5 days. However the 1 hour I estimated was on the end of the job.

Howard
__________________
Howard
Lucky Lucky
Stuart, FL
hmason is offline   Reply With Quote
Old 10-18-2014, 03:26 PM   #3
Moderator Emeritus
 
ksanders's Avatar
 
City: SEWARD ALASKA
Vessel Name: DOS PECES
Vessel Model: BAYLINER 4788
Join Date: Feb 2011
Posts: 6,266
Quote:
Originally Posted by seasalt007 View Post
I acquired this Blue Sea USB charger from Amazon ($12.25) with the intention of replacing an unused Perko two prong 12 v plug on my bridge console. The top port is for my iPhone and the bottom one for my Samsung Android Tablet that contains my back up navigation app.

When I removed the Perko plug I noticed that the hole in the console needs to be much bigger for the new gadget. That means a trip to the hardware store to get a 1 3/16" hole saw and taking a vac to the bridge to clean up the mess.

It proves to once again that there is no 10 minute boat project that doesn't take all day.

Yep, have you cut the bigger hole yet???

If not, you are going to learn very quickly that drilling a larger hole is going to be no fun at all. That's because you have no guide hole for your hole saw.

If I can suggest, if you take a piece of scrap stock, and attach or place it over the existing hole you'lll end up with a much happier experience.

Another method that saves allot of frustration is to draw the new hole over the old one and use your dremel to grind away material to fit.

If you are REALLY good with a hole saw you MIGHT be able to run the saw in reverse to make the cut, but that is for the highly experienced person, on soft material.

If you just go for it, chances are the saw will wanter, or catch, scratching up the surface.
__________________
Kevin Sanders
Bayliner 4788 Dos Peces
Seward, Alaska - La Paz, Baja California Sur
https://maps.findmespot.com/s/XLJZ#history/assets
ksanders is offline   Reply With Quote
Old 10-18-2014, 03:30 PM   #4
Guru
 
psneeld's Avatar
 
City: Ft Pierce
Vessel Name: Sold
Vessel Model: Was an Albin/PSN 40
Join Date: Oct 2011
Posts: 28,149
This is a trawler forum...

Minutes don't exist...hours are rare, days are common, months are popular and years tend to scare some of the older trawler owners as they are too easy to count and go by too fast.
psneeld is online now   Reply With Quote
Old 10-18-2014, 03:49 PM   #5
Guru
 
seasalt007's Avatar
 
City: Punta Gorda, FL
Vessel Name: Aweigh
Vessel Model: Nordic Tug 42
Join Date: Jun 2014
Posts: 628
Thanks Ksanders. Good advice. I was wondering how to go about it without it looking like "I did it" like the rest of my projects.
seasalt007 is offline   Reply With Quote
Old 10-18-2014, 04:16 PM   #6
Guru
 
janice142's Avatar
 
City: Madeira Beach, FL
Vessel Name: Seaweed
Vessel Model: Schucker mini-trawler
Join Date: Oct 2011
Posts: 1,236
Would now be a good time to let you know there are 12-volt cigarette lighter adapters? Some with one USB and some with two? For less than $5... try eBay or Amazon for a knock-off Chinese version. I've had mine (three of them) and all still work perfectly. The double I've only owned for a few months. The other two for over a year without issue.

I like 'em.
__________________
Janice aboard Seaweed, living the good life afloat...
https://janice142.com
janice142 is offline   Reply With Quote
Old 10-18-2014, 04:49 PM   #7
Guru
 
seasalt007's Avatar
 
City: Punta Gorda, FL
Vessel Name: Aweigh
Vessel Model: Nordic Tug 42
Join Date: Jun 2014
Posts: 628
Janice 142,

No, now would not be a good time to let me know since I own the one pictured above. I have two 12 volt plugs on the bridge...one two prong Perko and one cigarette lighter plug. All my Q Beam spot lights fit the cigarette lighter plug. I don't own anything that has a two pronged end that would work on the Perko so I wanted to get rid of it. Little did I know that the hole would have to be enlarged.

On that subject, I don't have the right Dremel tool (Harbor Freight version) to do this but I do have some assorted grinder bits for my old Makita battery drill. The only worry that I have using these bits is chipping the gelcoat. Any ideas on how to be really careful?
seasalt007 is offline   Reply With Quote
Old 10-18-2014, 05:06 PM   #8
Moderator Emeritus
 
ksanders's Avatar
 
City: SEWARD ALASKA
Vessel Name: DOS PECES
Vessel Model: BAYLINER 4788
Join Date: Feb 2011
Posts: 6,266
Quote:
Originally Posted by seasalt007 View Post
Janice 142,

No, now would not be a good time to let me know since I own the one pictured above. I have two 12 volt plugs on the bridge...one two prong Perko and one cigarette lighter plug. All my Q Beam spot lights fit the cigarette lighter plug. I don't own anything that has a two pronged end that would work on the Perko so I wanted to get rid of it. Little did I know that the hole would have to be enlarged.

On that subject, I don't have the right Dremel tool (Harbor Freight version) to do this but I do have some assorted grinder bits for my old Makita battery drill. The only worry that I have using these bits is chipping the gelcoat. Any ideas on how to be really careful?
Coarse mini sanding drum. Dremel makes little kits you can buy
__________________
Kevin Sanders
Bayliner 4788 Dos Peces
Seward, Alaska - La Paz, Baja California Sur
https://maps.findmespot.com/s/XLJZ#history/assets
ksanders is offline   Reply With Quote
Old 10-18-2014, 06:28 PM   #9
Guru
 
janice142's Avatar
 
City: Madeira Beach, FL
Vessel Name: Seaweed
Vessel Model: Schucker mini-trawler
Join Date: Oct 2011
Posts: 1,236
Quote:
Originally Posted by seasalt007 View Post
No, now would not be a good time to let me know since I own the one pictured above. I have two 12 volt plugs on the bridge...one two prong Perko and one cigarette lighter plug. All my Q Beam spot lights fit the cigarette lighter plug.
Gotcha, and thank you for the clarification. I have considered something similar to yours however in reflection decided an adapter and multiple cig-outlets allowed me more options. I do have cigarette-lighter-itis however with 8 on Seaweed. And all are useful/used.

Proof on this page: Janice142 article What Used Boat?

Good luck with your project.
__________________
Janice aboard Seaweed, living the good life afloat...
https://janice142.com
janice142 is offline   Reply With Quote
Old 10-18-2014, 07:57 PM   #10
Veteran Member
 
City: Seattle
Join Date: Mar 2013
Posts: 92
It's actually easy to drill a bigger hole. A second hole saw will spin on to the arbor so you end up with a hole saw within a hole saw. The inner one is the diameter of the existing hole and the outer one is the diameter of your intended hole. Done it many times and works like a champ.
Patemey is offline   Reply With Quote
Old 10-18-2014, 08:49 PM   #11
Guru
 
seasalt007's Avatar
 
City: Punta Gorda, FL
Vessel Name: Aweigh
Vessel Model: Nordic Tug 42
Join Date: Jun 2014
Posts: 628
Patemey,

So, if the existing hole is 3/4" and I need to go to 1 3/16" just get a hole saw for each size and assemble as a unit?

Will that work? Will they fit together?
seasalt007 is offline   Reply With Quote
Old 10-18-2014, 09:01 PM   #12
Moderator Emeritus
 
ksanders's Avatar
 
City: SEWARD ALASKA
Vessel Name: DOS PECES
Vessel Model: BAYLINER 4788
Join Date: Feb 2011
Posts: 6,266
Quote:
Originally Posted by Patemey View Post
It's actually easy to drill a bigger hole. A second hole saw will spin on to the arbor so you end up with a hole saw within a hole saw. The inner one is the diameter of the existing hole and the outer one is the diameter of your intended hole. Done it many times and works like a champ.
Thats a GREAT idea.

I never thought of that, and i've been in the "make a bigger hole" mode many many times
__________________
Kevin Sanders
Bayliner 4788 Dos Peces
Seward, Alaska - La Paz, Baja California Sur
https://maps.findmespot.com/s/XLJZ#history/assets
ksanders is offline   Reply With Quote
Old 10-18-2014, 11:06 PM   #13
Senior Member
 
Lollygag's Avatar
 
City: Valley Springs
Vessel Name: Lollygag
Vessel Model: 1979 42' CHB Europa
Join Date: Jan 2012
Posts: 259
That's a good one!
Lollygag is offline   Reply With Quote
Old 10-18-2014, 11:06 PM   #14
Senior Member
 
SaltyDog's Avatar
 
Join Date: Nov 2007
Posts: 251
Kudos to Patemey.
SaltyDog is offline   Reply With Quote
Old 10-19-2014, 03:27 AM   #15
Senior Member
 
stornoway7's Avatar
 
City: Hobart
Vessel Name: Theresa
Vessel Model: Cheoy Lee 66 LRMY
Join Date: Jun 2013
Posts: 118
10 minute job on something that floats ?
LOL
stornoway7 is offline   Reply With Quote
Old 10-19-2014, 05:00 AM   #16
TF Site Team
 
City: Ex-Brisbane, (Australia), now Bribie Island, Qld
Vessel Name: Now boatless - sold 6/2018
Vessel Model: Had a Clipper (CHB) 34
Join Date: Jun 2008
Posts: 10,101
There is no such thing as a ten minute boat project. Trust me on this..!
__________________
Pete
Peter B is offline   Reply With Quote
Old 10-19-2014, 05:00 AM   #17
FF
Guru
 
FF's Avatar
 
Join Date: Oct 2007
Posts: 22,553
Boats use the 90/90 Rule.

90% of the job takes 90% of the time,

The remaining 10% also takes 90% of your time
FF is offline   Reply With Quote
Old 10-19-2014, 06:51 AM   #18
Guru
 
O C Diver's Avatar
 
City: Fort Myers, FL... Summers in the Great Lakes
Vessel Name: Slow Hand
Vessel Model: Cherubini Independence 45
Join Date: Dec 2010
Posts: 12,834
Quote:
Originally Posted by Patemey View Post
It's actually easy to drill a bigger hole. A second hole saw will spin on to the arbor so you end up with a hole saw within a hole saw. The inner one is the diameter of the existing hole and the outer one is the diameter of your intended hole. Done it many times and works like a champ.
Yes, it works very well. The other trick is to fasten a piece of wood to the back side of a hole with screws or clamps. This allows you to offset the hole or make a round hole out of a cutout area.

Ted
__________________
Blog: mvslowhand.com
I'm tired of fast moves, I've got a slow groove, on my mind.....
I want to spend some time, Not come and go in a heated rush.....
"Slow Hand" by The Pointer Sisters
O C Diver is online now   Reply With Quote
Old 10-19-2014, 07:00 AM   #19
Enigma
 
RT Firefly's Avatar
 
City: Slicker?
Join Date: Oct 2007
Posts: 16,565
Greetings,
Mr. 007. And here I thought this was a comedy thread...I hear ya.
__________________
RTF
RT Firefly is offline   Reply With Quote
Old 10-19-2014, 07:56 AM   #20
Guru
 
Forkliftt's Avatar
 
City: Diberville Mississippi
Vessel Name: KnotDoneYet
Vessel Model: 1983 42' Present Sundeck
Join Date: Oct 2007
Posts: 2,450
Quote:
Originally Posted by Patemey View Post
It's actually easy to drill a bigger hole. A second hole saw will spin on to the arbor so you end up with a hole saw within a hole saw. The inner one is the diameter of the existing hole and the outer one is the diameter of your intended hole. Done it many times and works like a champ.

That is some GREAT information 👍


1983 Present 42 Sundeck
Twin Lehman 135's
✌️
__________________
Steve Point Cadet/ Biloxi, Mississippi USA
*Present 42 twin 135 Lehmans
Forkliftt is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


» Trawler Port Captains
Port Captains are TF volunteers who can serve as local guides or assist with local arrangements and information. Search below to locate Port Captains near your destination. To learn more about this program read here: TF Port Captain Program





All times are GMT -5. The time now is 03:59 PM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2006 - 2012