Reply
 
Thread Tools Display Modes
 
Old 08-09-2017, 03:42 AM   #1
Member
 
City: Perth
Country: Australia
Vessel Name: Yarradeen
Vessel Model: Harriscraft 48
Join Date: Jul 2017
Posts: 13
Old boat new motor

Hello

New motor has arrived and front mount Pto setup has been constructed by my engine installer
Attached Thumbnails
Click image for larger version

Name:	20170807_105304423_iOS.jpg
Views:	30
Size:	148.6 KB
ID:	67497   Click image for larger version

Name:	20170807_105251864_iOS.jpg
Views:	33
Size:	194.8 KB
ID:	67498   Click image for larger version

Name:	20170807_105339079_iOS.jpg
Views:	32
Size:	171.7 KB
ID:	67499   Click image for larger version

Name:	20170807_105333809_iOS.jpg
Views:	36
Size:	142.9 KB
ID:	67500  
__________________
Advertisement

yarradeen is offline   Reply With Quote
Old 08-09-2017, 04:20 AM   #2
Guru
 
City: Sydney
Country: Australia
Join Date: Jul 2015
Posts: 1,235
What make ?
__________________

gaston is offline   Reply With Quote
Old 08-09-2017, 04:21 AM   #3
Guru
 
City: Sydney
Country: Australia
Join Date: Jul 2015
Posts: 1,235
Whats the blue pump ?
gaston is offline   Reply With Quote
Old 08-09-2017, 04:22 AM   #4
Guru
 
City: Sydney
Country: Australia
Join Date: Jul 2015
Posts: 1,235
The big brass pump is the raw water engine pump ?
gaston is offline   Reply With Quote
Old 08-09-2017, 07:02 AM   #5
Member
 
City: Perth
Country: Australia
Vessel Name: Yarradeen
Vessel Model: Harriscraft 48
Join Date: Jul 2017
Posts: 13
Blue is hydraulic pump for steering. Jabsco (brass) is compartment bilge and deck wash.
yarradeen is offline   Reply With Quote
Old 08-09-2017, 07:03 AM   #6
Member
 
City: Perth
Country: Australia
Vessel Name: Yarradeen
Vessel Model: Harriscraft 48
Join Date: Jul 2017
Posts: 13
Iveco c13
yarradeen is offline   Reply With Quote
Old 08-09-2017, 07:21 AM   #7
Member
 
City: Perth
Country: Australia
Vessel Name: Yarradeen
Vessel Model: Harriscraft 48
Join Date: Jul 2017
Posts: 13
On my vessel that is built to survey the engine pump can be connected to each water tight compartment via this manifold....
Attached Thumbnails
Click image for larger version

Name:	DSC08061.jpg
Views:	20
Size:	91.1 KB
ID:	67508  
yarradeen is offline   Reply With Quote
Old 08-09-2017, 07:29 AM   #8
Enigma
 
RT Firefly's Avatar
 
City: Slicker?
Country: Bumpkin?
Join Date: Oct 2007
Posts: 9,850
Greetings,
Mr. y. You have a very competent engine installer, it appears. Stout bracketing.

The only "criticism"/observation I might offer is to weld a tab on the support brackets for both the hydraulic and wash down pumps, inboard, standing proud of the slotted bases. This will make it much easier to lever against the base of the pumps to tighten the belts.

Is the serpentine belt easily replaceable without disassembly of the belts on the two front pumps? I can't quite make out the routing.
__________________
RTF
RT Firefly is offline   Reply With Quote
Old 08-09-2017, 07:38 AM   #9
Member
 
City: Perth
Country: Australia
Vessel Name: Yarradeen
Vessel Model: Harriscraft 48
Join Date: Jul 2017
Posts: 13
Leverage point taken.

Crank snub is billet 4140 this will be painted for corrosion control. Plenty of space between front bracket and crank stub to replace serpentine belt. After removing front v belts.
yarradeen is offline   Reply With Quote
Old 08-09-2017, 07:48 AM   #10
Enigma
 
RT Firefly's Avatar
 
City: Slicker?
Country: Bumpkin?
Join Date: Oct 2007
Posts: 9,850
Greetings,
Mr. y. Thanks. I guess there was no other geometry around the pump/belt placement. I have a similar issue with our Naiad pump installation with NO leverage point. A real PIA to work with.
__________________
RTF
RT Firefly is offline   Reply With Quote
Old 08-09-2017, 06:06 PM   #11
Member
 
City: Perth
Country: Australia
Vessel Name: Yarradeen
Vessel Model: Harriscraft 48
Join Date: Jul 2017
Posts: 13
Checked leverage... as it works out the adjustment slots are long enough to permit a number 3 Philips driver to slot in and provide leverage against the pump body and bracket.
yarradeen is offline   Reply With Quote
Old 08-09-2017, 07:10 PM   #12
Enigma
 
RT Firefly's Avatar
 
City: Slicker?
Country: Bumpkin?
Join Date: Oct 2007
Posts: 9,850
Greetings,
Mr. y. OK. Your boat and I appreciate the screwdriver in the slot approach but at this stage, it would be a very simple task to add that tab I mentioned. In "the heat of the moment" you may thank me in the future...
__________________

__________________
RTF
RT Firefly is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off





All times are GMT -5. The time now is 04:57 AM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2006 - 2012