|
|
06-22-2017, 06:56 PM
|
#721
|
Guru
City: Upstate,SC
Vessel Name: Shipoopi
Vessel Model: derilic sailboat
Join Date: May 2012
Posts: 2,884
|
Take it easy and pet the shop supervisor for good luck.
__________________
This is my signature line. There are many like it but this one is mine.
What a pain in the transom.
|
|
|
06-24-2017, 01:39 PM
|
#722
|
Senior Member
City: Iroquois, ON
Vessel Name: She:Kon
Vessel Model: Bateau TW28
Join Date: Jun 2014
Posts: 466
|
I'm sure if the 'Shop Supervisor' had it his way I'd do nothing but pet him and get no boat building done!
Today I got the upper portion of Frame B tabbed to the hull and Frame D set in place. I'll line it up and glue it to the hull tomorrow.
I'll just keep plugging away till I fall down and can't get back up. Few more pics on the blog: https://she-kon.blogspot.ca/2017/06/bet ... tures.html
Standby....
__________________
Yours Aye! Rick
~^~^~^^~^~^~^~^~^~^~^~~^~^~~^~^~^^~~^~^
"It's not the boat "you built" until you've sworn at it, bled on it, sweated over it, cried beside it and then threatened to haul the POS outside and burn it!"
|
|
|
06-24-2017, 01:40 PM
|
#723
|
Senior Member
City: Iroquois, ON
Vessel Name: She:Kon
Vessel Model: Bateau TW28
Join Date: Jun 2014
Posts: 466
|
Quote:
Originally Posted by FlyWright
Nice work! Your need to establish and maintain the infrastructure supporting your build reminds me of books I've read about the Wright Bros. The needed to establish a functioning camp in the sand fly-infested, wind blown sand dunes of Kitty Hawk. When they'd leave and return after several months, they'd have to practically start over by rebuilding the camp.
Like you, they also brought more than smarts to the job. It takes tenacity, endurance, strength, experience and ingenuity to succeed. Looks like you've got it all in spades!
|
Thanks for the kind words Al. Means a lot. Honestly.
Rick
__________________
Yours Aye! Rick
~^~^~^^~^~^~^~^~^~^~^~~^~^~~^~^~^^~~^~^
"It's not the boat "you built" until you've sworn at it, bled on it, sweated over it, cried beside it and then threatened to haul the POS outside and burn it!"
|
|
|
06-24-2017, 03:01 PM
|
#724
|
Guru
City: Longboat Key, FL
Vessel Name: Bucky
Vessel Model: Krogen Manatee 36 North Sea
Join Date: Oct 2009
Posts: 5,196
|
Quote:
Originally Posted by FlyWright
It takes tenacity, endurance, strength, experience and ingenuity to succeed.
|
Thanks a lot, Al. I was happily ignorant of this only moments ago. I might as well just crawl into my lazarette and slam the hatch.
Can't deny that Rick has them in spades, though.
__________________
Larry
"When life gets hard, eat marshmallows”.
|
|
|
06-26-2017, 02:12 PM
|
#725
|
Senior Member
City: Iroquois, ON
Vessel Name: She:Kon
Vessel Model: Bateau TW28
Join Date: Jun 2014
Posts: 466
|
Quote:
Originally Posted by healhustler
Thanks a lot, Al. I was happily ignorant of this only moments ago. I might as well just crawl into my lazarette and slam the hatch.
Can't deny that Rick has them in spades, though.
|
I'll have to make sure the wife adds those words to her vocabulary. She just says I'm stubborn!
__________________
Yours Aye! Rick
~^~^~^^~^~^~^~^~^~^~^~~^~^~~^~^~^^~~^~^
"It's not the boat "you built" until you've sworn at it, bled on it, sweated over it, cried beside it and then threatened to haul the POS outside and burn it!"
|
|
|
06-26-2017, 02:13 PM
|
#726
|
Senior Member
City: Iroquois, ON
Vessel Name: She:Kon
Vessel Model: Bateau TW28
Join Date: Jun 2014
Posts: 466
|
Putzed around some more today. Back really seized up last night. Took it easy. After a fresh look at Frame D this morning I realized I had it all frigged up. The way I did it the thing floats in air so has to be braced eight ways from Sunday to get it in the proper place. After taking a wee tumble and wrecking it for the second time I cut some 2 x 4's for braces!
This part is on the starboard side just ahead of the v-berth. It'll likely become the Admiral's sewing table. And another overall view.
Measured twenty times. It's plumb & square as it should be. It'll get tabbed into place tomorrow along with Frame A. Gonna buy some cheap sheeting ply and put in some temporary decks.
Thanks for looking in fellas.
Standby...
__________________
Yours Aye! Rick
~^~^~^^~^~^~^~^~^~^~^~~^~^~~^~^~^^~~^~^
"It's not the boat "you built" until you've sworn at it, bled on it, sweated over it, cried beside it and then threatened to haul the POS outside and burn it!"
|
|
|
06-26-2017, 02:50 PM
|
#727
|
TF Site Team
City: California Delta
Vessel Name: FlyWright
Vessel Model: 1977 Marshall Californian 34 LRC
Join Date: Apr 2008
Posts: 13,728
|
Quote:
Originally Posted by healhustler
Thanks a lot, Al. I was happily ignorant of this only moments ago. I might as well just crawl into my lazarette and slam the hatch.
Can't deny that Rick has them in spades, though.
|
You're no slouch either, HH. We've seen your mods on your Manatee. I wish I had half of your talent.
Quote:
Originally Posted by She-Kon
Gonna buy some cheap sheeting ply and put in some temporary decks.
|
That should make it much easier on your back and knees.
|
|
|
06-28-2017, 02:44 PM
|
#728
|
Senior Member
City: Iroquois, ON
Vessel Name: She:Kon
Vessel Model: Bateau TW28
Join Date: Jun 2014
Posts: 466
|
Frame A and D now tabbed to the hull. I ran out of glue (epoxy & wood flour w/little cabosil) so ordered more. I hope to drop Frame F in tomorrow. That's the front part of the main cabin. Will have to build stairs over the engine space and down into the forward cabin. Engine should be finished soon.
Standby.....
__________________
Yours Aye! Rick
~^~^~^^~^~^~^~^~^~^~^~~^~^~~^~^~^^~~^~^
"It's not the boat "you built" until you've sworn at it, bled on it, sweated over it, cried beside it and then threatened to haul the POS outside and burn it!"
|
|
|
06-28-2017, 04:47 PM
|
#729
|
Guru
City: Upstate,SC
Vessel Name: Shipoopi
Vessel Model: derilic sailboat
Join Date: May 2012
Posts: 2,884
|
Quote:
Originally Posted by She-Kon
Frame A and D now tabbed to the hull. I ran out of glue (epoxy & wood flour w/little cabosil) so ordered more. I hope to drop Frame F in tomorrow. That's the front part of the main cabin. Will have to build stairs over the engine space and down into the forward cabin. Engine should be finished soon.
Standby.....
|
Making head way.
__________________
This is my signature line. There are many like it but this one is mine.
What a pain in the transom.
|
|
|
08-06-2017, 02:30 PM
|
#730
|
Senior Member
City: Iroquois, ON
Vessel Name: She:Kon
Vessel Model: Bateau TW28
Join Date: Jun 2014
Posts: 466
|
The rains seem to have let up for awhile.
Working hard trying to stop 'over thinking' every detail of this project. Just picked a task and go to it this morning.
[Sorry pics are on photobucket so I can't use them here]
Filled the rudder voids with expanding foam. First time I've ever used this stuff. Neat.
More pics & a video on today's blog update: https://she-kon.blogspot.ca/2017/08/ove ... hings.html
Thanks for looking in.
Cheers!
__________________
Yours Aye! Rick
~^~^~^^~^~^~^~^~^~^~^~~^~^~~^~^~^^~~^~^
"It's not the boat "you built" until you've sworn at it, bled on it, sweated over it, cried beside it and then threatened to haul the POS outside and burn it!"
|
|
|
08-06-2017, 08:59 PM
|
#731
|
Guru
City: Upstate,SC
Vessel Name: Shipoopi
Vessel Model: derilic sailboat
Join Date: May 2012
Posts: 2,884
|
That 2 part foam can be a bit finicky at times. I've had it go off as soon as I started mixing and I've had it take 10-15 minutes. It's not a big deal if it takes a while when it's going into and enclosed space. It's a big pita when doing a semi open pour like you were doing.
__________________
This is my signature line. There are many like it but this one is mine.
What a pain in the transom.
|
|
|
08-17-2017, 01:03 PM
|
#732
|
Senior Member
City: Iroquois, ON
Vessel Name: She:Kon
Vessel Model: Bateau TW28
Join Date: Jun 2014
Posts: 466
|
It hasn't rained in 36 hrs! Wohoo! We may have turned the corner. Oh wait. Fack! More nasty weather in the forecast!
Anyhow I managed to get some puttering in. Two aft bulkheads glassed. Boat leveled (for now). And some poo on the rudder. Never, ever pour that two part foam over plastic sheeting! Never!
Web log updated: https://she-kon.blogspot.ca/2017/08/jus ... round.html
__________________
Yours Aye! Rick
~^~^~^^~^~^~^~^~^~^~^~~^~^~~^~^~^^~~^~^
"It's not the boat "you built" until you've sworn at it, bled on it, sweated over it, cried beside it and then threatened to haul the POS outside and burn it!"
|
|
|
08-17-2017, 03:08 PM
|
#733
|
Guru
City: Upstate,SC
Vessel Name: Shipoopi
Vessel Model: derilic sailboat
Join Date: May 2012
Posts: 2,884
|
Good to hear you're getting some work done. I was thinking about you the other day. My youngest son wants to do a motorcycle ride up to Newfie. I don't think he realizes how far that is.
__________________
This is my signature line. There are many like it but this one is mine.
What a pain in the transom.
|
|
|
08-17-2017, 03:31 PM
|
#734
|
TF Site Team
City: Paris,TN
Vessel Name: Slo-Poke
Vessel Model: Jorgensen custom 44
Join Date: Jan 2013
Posts: 3,749
|
Nice job Rick ! My hat is off to you man.
__________________
Marty
|
|
|
08-19-2017, 02:31 PM
|
#735
|
Senior Member
City: Iroquois, ON
Vessel Name: She:Kon
Vessel Model: Bateau TW28
Join Date: Jun 2014
Posts: 466
|
Thanks fella's. Kind words help a lot!
Lil' sanding and more fairing on the rudder. Had guests so not much else got done.
Standby...
__________________
Yours Aye! Rick
~^~^~^^~^~^~^~^~^~^~^~~^~^~~^~^~^^~~^~^
"It's not the boat "you built" until you've sworn at it, bled on it, sweated over it, cried beside it and then threatened to haul the POS outside and burn it!"
|
|
|
08-28-2017, 03:23 PM
|
#736
|
Senior Member
City: Iroquois, ON
Vessel Name: She:Kon
Vessel Model: Bateau TW28
Join Date: Jun 2014
Posts: 466
|
__________________
Yours Aye! Rick
~^~^~^^~^~^~^~^~^~^~^~~^~^~~^~^~^^~~^~^
"It's not the boat "you built" until you've sworn at it, bled on it, sweated over it, cried beside it and then threatened to haul the POS outside and burn it!"
|
|
|
11-07-2017, 09:29 PM
|
#737
|
Member
City: Seattle
Join Date: Dec 2016
Posts: 19
|
Quote:
Originally Posted by She-Kon
|
Great blog!!
|
|
|
11-28-2017, 07:03 PM
|
#738
|
Guru
City: Aventura FL
Vessel Name: Kinja
Vessel Model: American Tug 34 #116 2008
Join Date: Oct 2017
Posts: 10,595
|
Quote:
Originally Posted by ben2go
I'd call that good score. A little extra money and two nice size coolers.
Don't feel bad about not fitting the MRI machine, I don't fit either. They used an open air MRI. It takes longer but gets the job done. I often wonder the same thing as well. Why the heck do we have to go in head first for a lower spine image?
|
After my first MRI, I told the doctor, one has two choices. You can either prefect your praying or your profanity, you make the choice.
I was promised a 'relaxer" but, it never arrived. I have had many more for my back and and and. I even had one wearing a cage to check out my head. I am not comfortable but, I can make it through. The first one, they tried putting a big velcro strap across me, that did not work. Seems the tech latched the strap just as I exhaled. Bad plan.
__________________
Two days out the hospital after a week in the hospital because of a significant heart attack.
|
|
|
03-26-2018, 05:59 AM
|
#739
|
Guru
City: Perth
Join Date: Nov 2012
Posts: 3,314
|
Oi get cracking ya silly old bugger. Boats ain’t gonna build itself...!!!
__________________
Builder and former owner of MV SOLSTICE
|
|
|
03-25-2019, 01:25 PM
|
#740
|
Senior Member
City: Iroquois, ON
Vessel Name: She:Kon
Vessel Model: Bateau TW28
Join Date: Jun 2014
Posts: 466
|
Hey Fella's & Gal's.
It's been awhile. We're close to breaking Winter's stranglehold on us. Warmer temps in the forecast. I was able to break my way into the boat shed this weekend to survey the damage from a wind storm a few weeks ago. See attached pix.
Currently back workin' for the gubment to buy more boat supplies. Should be back at building by mid April. Full time early may.
Standby....
Rick
PS. Our Youtube channel now uses our URL www.she-kon.com
__________________
Yours Aye! Rick
~^~^~^^~^~^~^~^~^~^~^~~^~^~~^~^~^^~~^~^
"It's not the boat "you built" until you've sworn at it, bled on it, sweated over it, cried beside it and then threatened to haul the POS outside and burn it!"
|
|
|
|
|
Thread Tools |
Search this Thread |
|
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Trawler Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|