|
04-07-2017, 01:14 AM
|
#1
|
Member
City: San Rafael, California
Vessel Name: M/V Patience
Vessel Model: 1978 Californian 38' Trawler
Join Date: Jul 2008
Posts: 23
|
New galley cabinets: Californian 38LRC
Over the winter I replaced the cabinets in my 38' Californian LRC.
Design Goals:
- 2" of rigid foam around refrigerator to improve efficiency.
- Eliminate cabinets doors which required getting on the floor to access stored items.
- Make silverware drawers deeper so spatulas wouldn't get caught when closing the drawer.
- Replace built in microwave with an oven. The Admiral likes to bake!
- Make the drawers deeper (21 inches) to take advantage of unused depth. Factory drawers were 16 inches deep.
- Replace double sink with a single.
Outcome:
- Eliminated all doors. Only drawers in new installation
- All drawers are soft close, full extension with push button locks
- One fold down storage area at front of sink.
- The refrigerator compressor runs much less and contents are colder.
- Cabinets are face frame construction & made of Philippine Mahogany.
- The Admiral loves it!
|
|
|
04-07-2017, 04:35 AM
|
#2
|
Senior Member
City: Baltimore, MD
Vessel Name: Starshine
Vessel Model: 1989 Bayliner 3288
Join Date: Aug 2014
Posts: 366
|
Looks great, I would say you not only met your goals but exceeded them.
|
|
|
04-07-2017, 06:28 AM
|
#3
|
TF Site Team
City: Paris,TN
Vessel Name: Slo-Poke
Vessel Model: Jorgensen custom 44
Join Date: Jan 2013
Posts: 3,749
|
Very nice work . Full length extension drawers and soft close super nice.
__________________
Marty
|
|
|
04-07-2017, 07:45 AM
|
#4
|
Senior Member
City: Miami, FL
Vessel Name: Mermaid Life
Vessel Model: Mainship 400
Join Date: Apr 2017
Posts: 112
|
Very nice, indeed! It's so satisfying to have new galley cabinets and storage space the way you want it!
For anyone considering a renovation such as this and don't want to go the route of custom built cabinets (assuming you're contemplating a DIY project like I did), I found a company right here in the US who makes some really quality cabinetry and they ship it to you, but you have to put it together. This is not the Home Depot, particle board, self-assemble stuff. If you google Barker Cabinets (for cabinets) and/or Barker Doors (for just cabinet fronts), you'll find them. I have no financial interest in this company - I'm just a very satisfied customer.
What sold me on them is that they offer solid sapele wood which matches my existing teak in the boat perfectly. I ordered mine, unsteadiness, but with clear coat - perfect match. I gutted my galley (all for the sake of wanting to install a dishwasher!) and redesigned it using Barker cabinetry. I, too, went with drawers for storing dishes. The regular cabinets have roll-out trays that I use for my pots and pans. I have some photos, although a tad dark, but you might can see how the sapele looks. It's a very nice alternative to expensive, hard to find teak. If you use sapele on the "ribbon" cut, it will look like the Mozambique teak which was used in a lot of boat from the 60s and 70s.
|
|
|
04-07-2017, 09:32 AM
|
#5
|
Guru
City: SF Bay Area
Vessel Model: Tollycraft 34' Tri Cabin
Join Date: Feb 2011
Posts: 12,569
|
Looks great!!
One item of caution... Refrigerator cooling units need breathing room/ventilation so they do not overheat and potentially cause fire. Seeing as you've considerably added insulation... Be careful to not let it overheat.
FWIK... During initial cooling of newly inserted food contents, wherein the fridge cooling unit may be maxed out for some time, overheating and fires may occur.
|
|
|
04-07-2017, 10:23 AM
|
#6
|
Member
City: San Rafael, California
Vessel Name: M/V Patience
Vessel Model: 1978 Californian 38' Trawler
Join Date: Jul 2008
Posts: 23
|
Good thoughts on proper venting of the refrigerator. That was a design consideration which was handled in the following manner.
- The heat transfer coils and motor at the rear of the refrigerator remain exposed.
- The unit sits on 2" of rigid foam on a platform. The platform has a ~3.5" tall & full width gap underneath it to allow cool air to be drawn under the unit and up the back.
- I did not vent on the top. The left back end of the cabinet has a vertical vent about 24" tall and 3" wide that allows the heated air which has passed over the coils to escape. I've monitored the temperature of the exhaust air and the air flow is more than sufficient to keep the delta-T in a reasonable range.
|
|
|
04-07-2017, 10:54 AM
|
#7
|
Guru
City: SF Bay Area
Vessel Model: Tollycraft 34' Tri Cabin
Join Date: Feb 2011
Posts: 12,569
|
Quote:
Originally Posted by mfreeman_1998
Good thoughts on proper venting of the refrigerator. That was a design consideration which was handled in the following manner.
- The heat transfer coils and motor at the rear of the refrigerator remain exposed.
- The unit sits on 2" of rigid foam on a platform. The platform has a ~3.5" tall & full width gap underneath it to allow cool air to be drawn under the unit and up the back.
- I did not vent on the top. The left back end of the cabinet has a vertical vent about 24" tall and 3" wide that allows the heated air which has passed over the coils to escape. I've monitored the temperature of the exhaust air and the air flow is more than sufficient to keep the delta-T in a reasonable range.
|
|
|
|
04-07-2017, 11:10 AM
|
#8
|
Guru
City: Gig Harbor
Vessel Name: Kinship
Vessel Model: North Pacific 43
Join Date: May 2015
Posts: 9,046
|
That looks really nice. Not only improve your functionality but make it look really good and improve resale at the same time (not that I think resale is that important.)
|
|
|
04-07-2017, 11:33 AM
|
#9
|
Guru
City: SF Bay Area
Vessel Model: Tollycraft 34' Tri Cabin
Join Date: Feb 2011
Posts: 12,569
|
Quote:
Originally Posted by dhays
That looks really nice. Not only improve your functionality but make it look really good and improve resale at the same time (not that I think resale is that important.)
|
You might have different view if you were reselling! LOL
|
|
|
04-07-2017, 11:38 AM
|
#10
|
Guru
City: Gig Harbor
Vessel Name: Kinship
Vessel Model: North Pacific 43
Join Date: May 2015
Posts: 9,046
|
Quote:
Originally Posted by Art
You might have different view if you were reselling! LOL
|
Yeah, true that. I am still trying to sell my sailboat.
|
|
|
04-07-2017, 11:50 AM
|
#11
|
Guru
City: SF Bay Area
Vessel Model: Tollycraft 34' Tri Cabin
Join Date: Feb 2011
Posts: 12,569
|
Quote:
Originally Posted by dhays
Yeah, true that. I am still trying to sell my sailboat.
|
Oh Dear!
Good Luck!!
|
|
|
04-07-2017, 12:20 PM
|
#12
|
TF Site Team
City: California Delta
Vessel Name: FlyWright
Vessel Model: 1977 Marshall Californian 34 LRC
Join Date: Apr 2008
Posts: 13,728
|
Very nice result, Mike!
I'm also getting tired of kneeling for anything under the oven or settee. I don't have your skills but maybe a combo is your ideas and Mermaid's Barker recommendation could make this a possible future improvement on FlyWright.
Thanks to both of you for posting!! Well done!!
|
|
|
04-15-2017, 11:58 PM
|
#13
|
Veteran Member
City: Steamboat Springs CO.
Join Date: Jul 2016
Posts: 92
|
Brilliant posts you guys...THANK YOU THANK YOU THANK YOU...
The Barker Link is GOLD!
Ch
|
|
|
|
Thread Tools |
Search this Thread |
|
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Trawler Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|