|
|
04-17-2018, 01:51 AM
|
#1
|
Senior Member
City: Tri-Cities WA
Vessel Name: Long Shot
Vessel Model: 1978 Californian 42' LRC
Join Date: May 2014
Posts: 191
|
Aft cabin Door Re-build
Well....here goes another project. I hope to have this back on the boat by the time the weather breaks for other dockside work.
I can't leave well enough alone and have decided to fab a sealed port light for the top door panel. Recently I came across round aluminum castings that can be machined into an exterior bezel and round, tempered, prismatic glass. I'm going to re-purpose some of the original teak fb rail for the interior bezel.
Here is the starting point. I'll post progress pics.
Q: Any other LRC owners in the same boat so to speak? I'll have a good shop drawing when done.
__________________
Eric
Please throw me the bowline Fraulein!
|
|
|
04-23-2018, 01:28 AM
|
#2
|
Senior Member
City: Tri-Cities WA
Vessel Name: Long Shot
Vessel Model: 1978 Californian 42' LRC
Join Date: May 2014
Posts: 191
|
Port Light Bezels
Here are the inner and outer bezels.
The aluminum frames that I found all had one hole drilled larger than the others for some reason. All that was needed was to chamfer the edges and sand to a matte finish. I'll either shoot it with some automotive urethane clear or send it out to be powder coated.
The joints in the teak are epoxied with jatoba splines for some contrast. It turns a rich burgundy color when exposed to the sun.
Now all I need is a new door to install these on!
__________________
Eric
Please throw me the bowline Fraulein!
|
|
|
04-23-2018, 01:33 AM
|
#3
|
Senior Member
City: NW Washington State
Vessel Name: Kingfisher
Vessel Model: 37' converted gillnetter/crabber
Join Date: Oct 2017
Posts: 442
|
That is spectacular! I would like to do exactly this for a fixed light I'd like to place in my aft cabin bulkhead. Surplus portlights are so damned expensive...you've inspired me!
__________________
Anson & Donna
Be kind whenever possible. It is always possible. ~The Dalai Lama
|
|
|
04-23-2018, 01:44 AM
|
#4
|
Moderator Emeritus
City: Au Gres, MI
Vessel Name: Black Dog
Vessel Model: Formula 41PC
Join Date: Jul 2015
Posts: 21,187
|
Looks very nice.
|
|
|
04-23-2018, 01:53 AM
|
#5
|
Senior Member
City: Tri-Cities WA
Vessel Name: Long Shot
Vessel Model: 1978 Californian 42' LRC
Join Date: May 2014
Posts: 191
|
Thanks Anson. I receive a lot of inspiration from this forum as well.
The chamfering was done on a router table. Are you a wood worker also? I have $0 into the aluminum frames (8.25" OD) and tempered, prismatic glass and have several "extras". PM me if you're interested in fabricating your own and I'll send you a frame and lens n/c.
__________________
Eric
Please throw me the bowline Fraulein!
|
|
|
04-23-2018, 07:16 AM
|
#6
|
Enigma
City: Slicker?
Join Date: Oct 2007
Posts: 16,565
|
Greetings,
Mr. ADC. VERY nice work! For several years now, I've wanted to install a fixed port light (I've also heard them referred to as a DEADLIGHT) in our ER door. It would allow a quick look-see before entering underway in the event of an ER emergency. You've inspired ME as well. Thank you (sorta...Yet another item on the "to do" list).
__________________
RTF
|
|
|
04-23-2018, 08:37 AM
|
#7
|
Guru
City: Philadelphia, PA
Vessel Name: Revel
Vessel Model: 1984 Fu Hwa 39
Join Date: Nov 2015
Posts: 1,024
|
Well done! (Shouldn't you have used an odd number of segments so as to cause eye-rolling and wonderment in those who can count and divide the number into 360?)
Why bother with the aluminum? Just do the Teak again and it'll look lovely on the Teak door panel.
Just for fun, here are pics of companionway slides that I made for our last sailboat. Teak exterior 5/16" thick veneer, louvers and breadboarding, Makore interior 5/16" thick veneer, bronze screen. And a core laminate of 1/8" epoxy-glass for stability. (The original slides were Teak plywood with Makore veneer inside; one was missing and the other had the veneer sanded through.)
|
|
|
04-23-2018, 01:52 PM
|
#8
|
Senior Member
City: NW Washington State
Vessel Name: Kingfisher
Vessel Model: 37' converted gillnetter/crabber
Join Date: Oct 2017
Posts: 442
|
Quote:
Originally Posted by Aft Deck Capt
Thanks Anson. I receive a lot of inspiration from this forum as well.
The chamfering was done on a router table. Are you a wood worker also? I have $0 into the aluminum frames (8.25" OD) and tempered, prismatic glass and have several "extras". PM me if you're interested in fabricating your own and I'll send you a frame and lens n/c.
|
Man, I'd take you up on that in a heartbeat, but the proper proportion on this one will require a 10-12 inch diameter. It will be in the starboard cabin side in a big, flat, empty space between the pilothouse window and the aft cabin window. It looks very unbalanced and naked now, whereas the port side has the window to the head there and looks properly proportioned.
I think I'll still use your idea for the interior wood bezel, though. It's really beautiful. It's going to look fantastic in that door.
__________________
Anson & Donna
Be kind whenever possible. It is always possible. ~The Dalai Lama
|
|
|
04-23-2018, 07:53 PM
|
#9
|
TF Site Team
City: Paris,TN
Vessel Name: Slo-Poke
Vessel Model: Jorgensen custom 44
Join Date: Jan 2013
Posts: 3,749
|
Very nice work Capt
__________________
Marty
|
|
|
04-24-2018, 01:18 AM
|
#10
|
Senior Member
City: Tri-Cities WA
Vessel Name: Long Shot
Vessel Model: 1978 Californian 42' LRC
Join Date: May 2014
Posts: 191
|
Thanks for the encouragement all!
RT, a window in the ER door is a fine idea. Great! Now I have another item on the to do list!
DH, what a beautiful set of doors! You really set the bar high! I opted for the aluminum on the outside because of it's lower profile.
Anson, the offer is good as long as I have the parts. Surely you could find an interior door/panel to put one in!
Marty, I've always admired those round windows on your helm doors, love that look.
Between work and a top to bottom bathroom remodel, time to work on the boat has been hampered. It'll be a couple of weeks before any progress is made on the new door - stay tuned.
__________________
Eric
Please throw me the bowline Fraulein!
|
|
|
05-30-2018, 02:01 AM
|
#11
|
Senior Member
City: Tri-Cities WA
Vessel Name: Long Shot
Vessel Model: 1978 Californian 42' LRC
Join Date: May 2014
Posts: 191
|
Complete!
Finally finished the door and got it re-mounted!
The frame is Afromosia with BS1088 marine plywood panels. Like the cabin doors the panels were stained then sealed with 2 coats of laminating epoxy. The corner joints and panels to frame grooves are joined/sealed with structural epoxy.... Water, you shall not pass!
The cope & stick corner joints are beefed up with some loose tenons and more epoxy.
The exterior side of the frame received 2 coats of laminating epoxy prior to 6 sprayed coats of Pettit Captains gloss varnish. The interior has 6 sprayed coats of McCloskey's satin varnish.
We really like the additional light that comes into the aft cabin.
__________________
Eric
Please throw me the bowline Fraulein!
|
|
|
05-30-2018, 03:46 AM
|
#12
|
Guru
City: Sarasota,FL/Thomasville,GA
Vessel Name: Steppin Stone IV
Vessel Model: Marine Trader Kelly Trawler 46
Join Date: Jul 2013
Posts: 1,815
|
It looks great Eric
__________________
Alan
Skype roatan63
|
|
|
05-30-2018, 05:09 AM
|
#13
|
Enigma
City: Slicker?
Join Date: Oct 2007
Posts: 16,565
|
__________________
RTF
|
|
|
05-30-2018, 08:22 AM
|
#14
|
Guru
City: Looking
Vessel Name: --
Vessel Model: Between boats
Join Date: Aug 2017
Posts: 1,190
|
Wow! That's gorgeous!
Well done!
|
|
|
05-30-2018, 10:01 AM
|
#15
|
TF Site Team
City: Paris,TN
Vessel Name: Slo-Poke
Vessel Model: Jorgensen custom 44
Join Date: Jan 2013
Posts: 3,749
|
Very nice work . Those loose tenons are a nice touch, gives the cope and stick joint the extra strength it needs .
__________________
Marty
|
|
|
05-30-2018, 10:16 AM
|
#16
|
Guru
City: gulf coast
Join Date: Jun 2014
Posts: 3,440
|
great looking work!
|
|
|
05-30-2018, 11:00 AM
|
#17
|
Senior Member
City: Bellingham, WA
Vessel Name: Excellent Adventure
Vessel Model: 1995 Jefferson Ker Shine 45
Join Date: Apr 2015
Posts: 395
|
You make me feel inadequate. Looks too good.
|
|
|
05-30-2018, 11:07 AM
|
#18
|
Guru
City: Tri Cities, WA
Join Date: Nov 2012
Posts: 4,406
|
Eric,
I don't know how I missed this thread, but I'm glad I found it. The door is absolutely gorgeous and I am sooooo jealous of your woodworking ability.
I'll be watching for you on the docks so I can get a tour of your boat.
__________________
Mike and Tina
1981 Boston Whaler 13'
|
|
|
05-30-2018, 11:12 AM
|
#19
|
Guru
City: Philadelphia, PA
Vessel Name: Revel
Vessel Model: 1984 Fu Hwa 39
Join Date: Nov 2015
Posts: 1,024
|
Lovely work!
|
|
|
05-30-2018, 11:15 AM
|
#20
|
Senior Member
City: Pensacola
Vessel Name: CLASSEA
Vessel Model: 1988 Defever 41
Join Date: Apr 2017
Posts: 160
|
Well done!
|
|
|
|
|
Thread Tools |
Search this Thread |
|
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Trawler Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|