Reply
 
Thread Tools Search this Thread Display Modes
 
Old 07-21-2012, 10:39 AM   #1
Guru
 
City: Pensacola
Join Date: May 2012
Posts: 748
Towing a Jet Ski

Have or do any of you folks tow a jet ski? I am considering towing a Yamaha Wave Runner behind my trawler and since I wont go over 7 kts I should be good with the tow speed, but what about towing rigs?
Blue Heron is offline   Reply With Quote
Old 07-21-2012, 11:15 AM   #2
Guru
 
ben2go's Avatar
 
City: Upstate,SC
Vessel Name: Shipoopi
Vessel Model: derilic sailboat
Join Date: May 2012
Posts: 2,884
I haven't done it personally,but I have seen it done.There was a Bayliner around 25-28 ft on Hartwell pulling a large Seadoo.He was running displacement speeds.The Seadoo was tied off from the bow eye to the rear right cleat.Not sure what type rope he used.The thing that would concern me is the height of the tie off point on the boat versus the height of the tie off point on the wave runner.I've seen small boats swamped because of the height difference and operator error.
__________________
This is my signature line. There are many like it but this one is mine.

What a pain in the transom.

ben2go is offline   Reply With Quote
Old 07-21-2012, 11:51 AM   #3
Guru
 
psneeld's Avatar
 
City: Ft Pierce
Vessel Name: Sold
Vessel Model: Was an Albin/PSN 40
Join Date: Oct 2011
Posts: 28,148
Not a big deal...I tow them all the time in my assistance towng job...you do have to check the manual for what speed is a problem before you turn off/clamp off the water feed so you don't backfill the exhaust system.
psneeld is online now   Reply With Quote
Old 07-21-2012, 12:04 PM   #4
Guru
 
Forkliftt's Avatar
 
City: Diberville Mississippi
Vessel Name: KnotDoneYet
Vessel Model: 1983 42' Present Sundeck
Join Date: Oct 2007
Posts: 2,450
Quote:
Originally Posted by psneeld View Post
Not a big deal...I tow them all the time in my assistance towng job...you do have to check the manual for what speed is a problem before you turn off/clamp off the water feed so you don't backfill the exhaust system.
Ps, any tricks to stopping without causing damage?
Forkliftt is offline   Reply With Quote
Old 07-21-2012, 12:21 PM   #5
Guru
 
City: Georgia
Join Date: Jul 2012
Posts: 951
Quote:
Originally Posted by Forkliftt View Post
Ps, any tricks to stopping without causing damage?
Have a catcher in the back of your boat to stop the jet ski from ramming your boat. I mistakenly towed a jet ski with our jet ski and while we could stop, that craft did not.
Rambler is offline   Reply With Quote
Old 07-21-2012, 12:26 PM   #6
Guru
 
psneeld's Avatar
 
City: Ft Pierce
Vessel Name: Sold
Vessel Model: Was an Albin/PSN 40
Join Date: Oct 2011
Posts: 28,148
Don't slam on the brakes!!!????

If only doing 5-10 knots the chances of it even hitting you with 50 feet or so of towline is pretty rare as they go all over the place. At higher speeds..just use 75-100 feet of towline....

Really not an issue and i tow at least a 100 per year....as long as you slow down gradually...the worst is a minor bump without any damage unless a really weird hit.
psneeld is online now   Reply With Quote
Old 07-21-2012, 12:53 PM   #7
Guru
 
Steve's Avatar
 
City: Thibodaux, Louisiana
Vessel Name: Gumbo
Vessel Model: 2003 Monk 36
Join Date: Oct 2007
Posts: 3,882
Aren't there enough of them out there already?
Steve W
Steve is offline   Reply With Quote
Old 07-21-2012, 12:58 PM   #8
Guru
 
psneeld's Avatar
 
City: Ft Pierce
Vessel Name: Sold
Vessel Model: Was an Albin/PSN 40
Join Date: Oct 2011
Posts: 28,148
Quote:
Originally Posted by Steve View Post
Aren't there enough of them out there already?
Steve W
Just like trawlers..it isn't the vessel that's the problem...it's the owner.

Like the thread about where the next generation boater is coming from...it's through jet skis generally as they are entry level boat nowadays...be their enemy and there are just that many fewer future trawler owners and true cruisers.

I would love to have the room for both a jet ski and a proper dingy to cruise...and I am just as traditionalist as any.
psneeld is online now   Reply With Quote
Old 07-21-2012, 11:24 PM   #9
Guru
 
Woodsong's Avatar
 
City: Atlanta
Vessel Model: Bayliner 4550 Pilothouse
Join Date: Oct 2007
Posts: 1,630
I love trawlers and cruising but I will be the first to admit that jetskis are a blast to ride.

We towed ours behind our 38 silverton all the time back when we had both the silverton and the jetski. No need for a fancy towing rig unless going out in crazy seas. We hooked ours up to a line used to pull tubes behind skiboats and tied it to one transom cleat and off we went. Easy as could be- just don't stop super fast without someone behind you to watch for it hitting you as already mentioned.
Woodsong is offline   Reply With Quote
Old 07-22-2012, 10:09 AM   #10
Guru
 
Phil Fill's Avatar
 
City: Everett Wa
Vessel Name: Eagle
Vessel Model: Roughwater 58 pilot house
Join Date: Oct 2007
Posts: 2,919
I use the anchor bridle tied to the two side stern cleats which keeps the dink center behind the Eagle and some what protected.
Phil Fill is offline   Reply With Quote
Old 07-23-2012, 07:28 PM   #11
Guru
 
City: Pensacola
Join Date: May 2012
Posts: 748
Psneeld,
Good point on the exhaust back fill. I intend to use a bridal tow on each aft cleat.
Blue Heron is offline   Reply With Quote
Old 07-24-2012, 10:26 AM   #12
Guru
 
Dougcole's Avatar
 
City: Carrabelle, FL
Vessel Name: Morgan
Vessel Model: '05 Mainship 40T
Join Date: Jan 2008
Posts: 2,162
We tow our RIB dinghy a lot at displacement speeds. One thing I do is run two tow lines to it, one that attaches to the bow eye with a snap hook, the other is tied to the bow loop. That way if one line or attachment point fails the little guy is still tied to us. I do the same thing with my flats boat when I tow it, one on the bow eye, one on the bow cleat.

I tie one line to one stern cleat on the big boat, one to the other stern cleat. I adjust them so the tow is centered. I like it better than a bridle because of the ability to adjust and the redundancy of a second line.
Dougcole is offline   Reply With Quote
Old 07-24-2012, 10:47 AM   #13
Member
 
City: Galveston Texas
Vessel Name: Sangria Nites
Vessel Model: Gulfstar 43 Trawler
Join Date: Aug 2011
Posts: 22
MySeddoo manuel states it should not be towed above 15 mph and I dont think my average 6 to 8 knots is anything to worry about. LIFE IS SOOOO GOOD!!!
G DUb is offline   Reply With Quote
Old 07-24-2012, 11:08 AM   #14
Guru
 
City: Pensacola
Join Date: May 2012
Posts: 748
Doug, that is a good idea.

G Dub, yes that is my line of reasoning also..
Blue Heron is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


» Trawler Port Captains
Port Captains are TF volunteers who can serve as local guides or assist with local arrangements and information. Search below to locate Port Captains near your destination. To learn more about this program read here: TF Port Captain Program





All times are GMT -5. The time now is 10:52 AM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2006 - 2012