The sea-water pump on our '73 GB 48' Classic has had it! It was positioned in the engine room, port-side for'd and comes on to the deck port-side by the anchor.
I intend to re-fit it using the now redundant for'd heads raw-water inlet so that it is almost directly under the point of use - no issues there I don't think.
Question is, what brand or specification would you recommend. Ideally it will need to activate when the hose is turned on - presumably via a switch operated by water flow? Not sure how all this works - any ideas please??
I intend to re-fit it using the now redundant for'd heads raw-water inlet so that it is almost directly under the point of use - no issues there I don't think.
Question is, what brand or specification would you recommend. Ideally it will need to activate when the hose is turned on - presumably via a switch operated by water flow? Not sure how all this works - any ideas please??