Hurth transmission parts needed

[TripleGGG]

Model ZF HSW 630 V1 2.5
Ration A=2.48, B=2.53
Serial # 17 13079 C

Need the prop shaft coupler, 8 bolts, and 4 pins. My mechanic says the coupler and 8 bolts are available to ship from Germany but the 4 pins are on backorder. Thought I would ask on the forum if anyone might have them or no of availability somewhere.

Not sure if this is needed but it is in a 1996 Mainship 40 Sedan Bridge coupled to Marine Power 454.

 

[ben2go]

Try Line Six Services 856-466-5941


Line Six Services - Home


I learned about them through ebay while looking at used transmissions. They seem to be very reasonable on costs.

 

[TripleGGG]

Thanks I'll call them Monday.

Try Line Six Services 856-466-5941


Line Six Services - Home


I learned about them through ebay while looking at used transmissions. They seem to be very reasonable on costs.

 

[Ski in NC]

Coupler that mounts on the shaft and bolts to the tranny flange? Should be industry standard and easy to find.

 

[TripleGGG]

Coupler that mounts on the shaft and bolts to the tranny flange? Should be industry standard and easy to find.

Coupler doesn't seem to be the issue. It's the pins. And it's the transmission side coupler.

 

[Larry M]

Greg: Do you have any pictures?

 

[TripleGGG]

Greg: Do you have any pictures?

Here are some pictures.

 

[ben2go]

Thanks I'll call them Monday.

You're welcome and good luck. Some of those small parts can be a pain in the rear to allocate.