We have a 390, there is no fuse between panel & macerator, This past summer ours stopped working
So I thought this was a quick fix project. Replaced all the jumpers and pigtails with crimped connectors and a distribution strip. Turned breaker back on and I don’t have any + power to macerate but I do have it on breaker panel. Ran a jumper from +heavy wire on breaker to dist strip and it works fine so I know the grounds are connected.
It seems that the wire from breaker and the + on the strip are disconnected somewhere? Not sure why this wire is 8/10 awg, motor is 10 amps, seems over kill for the breaker and the motor, 20-30 foot run I’m guessing.
Any ideas short of running new wire?