SirJohn
Veteran Member
- Joined
- Mar 26, 2018
- Messages
- 27
- Location
- usa
- Vessel Name
- BAG END
- Vessel Make
- Marine Trader 38 Sundeck
I have started the process of replacing the sanitation hoses in my MT38. The previous owner did some wild plumbing and the hose was completely restricted with calcium and nastiness. Some of the connections were able to be cleaned with muriatic acid to remove the calcium.
Here is my question for the group. Where and/or how is your aft head hooked up to your holding tank?
Do other MT 38 owners have 2 holding tanks or one?
I presently have a 35 gallon holding tank in the bilge area of the galley and the forward head hooked up to it.
To connect the aft head to this holding tank would require around a 15 foot run of sanitation hose thru the engine room to the tank. Both heads are plumbed for overboard discharge if needed. However our cruising area is a no discharge zone.
Any and all input greatly appreciated.
Here is my question for the group. Where and/or how is your aft head hooked up to your holding tank?
Do other MT 38 owners have 2 holding tanks or one?
I presently have a 35 gallon holding tank in the bilge area of the galley and the forward head hooked up to it.
To connect the aft head to this holding tank would require around a 15 foot run of sanitation hose thru the engine room to the tank. Both heads are plumbed for overboard discharge if needed. However our cruising area is a no discharge zone.
Any and all input greatly appreciated.