Mainship 400 Mast Manufacturer and model?

[jefndeb]

Hello,

We have bought an Intellian i3 SAT TV system and in the planning stages of how and where to mount the dome.

I currently have a Raymarine Radar mounted on the mast but there is also what seems to be an extra little surface area aft of the dome where I might could mount a scantrut powertower, see link..

https://scanstrut.com/index.php?opt...emart_product_id=380&virtuemart_category_id=8

Does anybody know who Mainship used as the vendor for this?

Mine sorta looks like the one in the other picture from PVI Seaview series mounts..

I definitely will need to reverse the Masthead Wind transducer..

Thanks

 

[jimdavi]

Looks like a seaview antenna mount.

 

[Seevee]

Just a thougt....


How about mounting it on the side (see pix), totally separate from the mast. You still want to be able to lower the mast and the curved part of the anchor light support rests on the table.



Another thing, if mounted on the mast, you'd want to go over or under the radar, not to interfer with it. Possible but a bit of work and engineering.