Pack Mule
TF Site Team
- Joined
- Jan 24, 2013
- Messages
- 3,749
- Location
- USA
- Vessel Name
- Slo-Poke
- Vessel Make
- Jorgensen custom 44
This is a 150 gallon fuel tank that is original to the boat. The tank sprang a leak this weekend. It had about 80 gallons in it that I was able to transfer to my other 4 aluminum tanks . The aluminum tanks were installed in 2002. Without this tank I will still have 275 gallon fuel capacity in the 4 aluminum tanks. This tank is on port side in engine room. It’s approximately 2-1/2 ft square x 6-1/2 ft long.
We need more water capacity. My plan is to cut it out this winter and install a new water tank. I can get to this through the engine room door. I’m hoping to get another 50 gallons at least of water. This “should” be easier than my last water tank install.
We need more water capacity. My plan is to cut it out this winter and install a new water tank. I can get to this through the engine room door. I’m hoping to get another 50 gallons at least of water. This “should” be easier than my last water tank install.
Attachments
Last edited: