ORIF
Senior Member
Can anyone identify this deck fill?
It's on a 1986 44' Tollycraft.
I need to see about replacing the o-ring. In this case, the o-ring seems like it be embedded into the base rather than simply fitted around the cap threads.
Maybe it just pulls out and new presses back in but afraid to pull on it until sure.
Looking at my own pictures, I'm now betting the outer ring held on with 3 screws comes off and that's holding a more substantial gasket underneath.
Fuel line size is 2 inch.
Outer diameter of flange is 4.5"
Cap diameter is 3 inches.
Thanks for any knowledge on this part.
It's on a 1986 44' Tollycraft.
I need to see about replacing the o-ring. In this case, the o-ring seems like it be embedded into the base rather than simply fitted around the cap threads.
Maybe it just pulls out and new presses back in but afraid to pull on it until sure.
Looking at my own pictures, I'm now betting the outer ring held on with 3 screws comes off and that's holding a more substantial gasket underneath.
Fuel line size is 2 inch.
Outer diameter of flange is 4.5"
Cap diameter is 3 inches.
Thanks for any knowledge on this part.
Attachments
Last edited: