engine oil/transmission cooler

[rochepoint]

A while back I replaced my original 1985 Perkins oil cooler with a Sen-Dure dual cooler because my local guys could not locate a replacement tube set. I thought I would see if anbody had any ideas as I would like to rebuild the original one. It is a Serck dual cooler, the numbers on the case are 47114 1091 and the tube stack is 3" in diameter/4.75 in long. It is built like a crazy and the cast case and ends look like new (well close) after 26 years. Where would I start to look?

 

[Edelweiss]

Those numbers don't cross with any Perkins parts that I could find. *I usually shop heat exchangers and oil coolers from The Manifold Warehouse. *They seem to have a very good selection for Perkins applications. From their home page, click perkins, then click product list and scrole down to manifolds and coolers.

http://www.manifoldwarehouse.com/mes/mgr?brch=home

*

Good luck

Larry B

 

[FF]

Cleaning the tube stack, and new end gaskets might be all it needs.