Pieyed47:
That is one of the BEST videos on how to bed or re-bed deck hardware I have seen.
When we started repairing the leaks coming from our deck hardware, all we had was the written instructions on the Compass Marine website, with a few photos. Glad to see we did it right!
I did not see any mention of using a drill bit instead of the chamfering bit in the video (must have missed it) as C Lectric mentioned. In the video the gentleman doing the repair uses the proper chamfering bit to enlarge the holes. We used a similar bit, and it is very easy.
Anyone who is interested in fixing leaks or even adding a padeye could watch the video and gain the confidence to perform many repairs/modifications to their boat. It really is as easy at it looks in the video.
The only thing I would add is to put a bit of dishwashing soap such as Dawn on the lock nuts before tightening. This helps prevent accidentally stripping the bolts and/or lock nuts.
Cheers,
Mrs. Pea Trombley