wkearney99
Guru
- Joined
- Feb 17, 2018
- Messages
- 2,164
- Location
- USA
- Vessel Name
- Solstice
- Vessel Make
- Grand Banks 47 Eastbay FB
I've got three separate pantograph wipers. None of them are holding tight to the glass anymore. When lifted from the glass they tend to stay lifted, pressing them back to the glass doesn't have them stay there.
The manual says they're by Exalto.
EXALTO WIPERS #M-75000-04 ( MOTOR, ARM & BLADE )
COLD, HERSEE WIPER SWITCH
BLADE: 800MM ARM:690MM
I don't know the motor model, but they're all three mounted inside, behind a wood valance panel.
Are these serviceable at all? Or am I looking at replacing the arms completely?
Using the Internet Archive is handy for bringing up old websites. I found Exalto's pages from 2004.
The manual says they're by Exalto.
EXALTO WIPERS #M-75000-04 ( MOTOR, ARM & BLADE )
COLD, HERSEE WIPER SWITCH
BLADE: 800MM ARM:690MM
I don't know the motor model, but they're all three mounted inside, behind a wood valance panel.
Are these serviceable at all? Or am I looking at replacing the arms completely?
Using the Internet Archive is handy for bringing up old websites. I found Exalto's pages from 2004.