Trawler Forum

Trawler Forum (http://www.trawlerforum.com/forums/)
-   General Discussion (http://www.trawlerforum.com/forums/s3/)
-   -   Before and After (http://www.trawlerforum.com/forums/s3/before-after-3673.html)

Anode 06-22-2011 11:56 AM

Before and After
 
1 Attachment(s)
The first picture is a before. The others are after a little time, effort*and $$.

Getting closer but not there yet.

Woodsong 06-22-2011 12:12 PM

RE: Before and After
 
Nice!! did you replace the window frames or just paint them?

BaltimoreLurker 06-22-2011 12:15 PM

RE: Before and After
 
Wow!* She looks almost "showroom" like.

*

Anode 06-22-2011 01:31 PM

RE: Before and After
 
1 Attachment(s)
Every window in the boat was removed and replaced with new aluminum framed windows. All of the openings were glassed in before making templets for the new windows.

Tom.B 06-22-2011 01:34 PM

RE: Before and After
 
Where did you get those windows made? Can you give me an idea on price?

Woodsong 06-22-2011 02:05 PM

RE: Before and After
 
Anode, I believe if your trawler could kiss you right now SHE WOULD! Very interested where you got your windows too. I have no need for doing anything to mine right now and I like their teak frames (for now!!) but would be curious where you got them made and how you spec'd them out.

Pineapple Girl 06-22-2011 02:21 PM

RE: Before and After
 
looks FANTASTIC!!

http://www.sparkimg.com/emoticons/biggrin.gif

markpierce 06-22-2011 02:29 PM

RE: Before and After
 
Wooden window frames?* No thanks; not me. *You made*a sound*decision.

http://www.trawlerforum.com/attachme...effd9e149e.jpg

FlyWright 06-22-2011 02:40 PM

RE: Before and After
 
WOW!!! Very nice work, Anode! Can't wait to see the interior.

Tom.B 06-22-2011 02:47 PM

RE: Before and After
 
It's funny because Bess and I both like the wood frame we see on Chuck's boat, but didn't want to have to custom fab them. Would like to at least get an estimate of custom windows before it's too late.

I like Anode's look though. Nice job.

Anode 06-23-2011 05:44 AM

RE: Before and After
 
1 Attachment(s)
Thanks folks! Scout is still a work in progress.

Lots of window fabricators out there but very few will weld up square cornered windows. Most bend radius corners.

I used WaterWaySystems. http://www.waterwaysystems.com/*. My contact was the owner Chuck. He was very responsive to all my questions via email and the phone calls besides making a very nice product. I think I may have drove him a bit crazy with all my questions.

I replaced all 14 windows in Scout. Three windshield (center tilts out).*Four *fixed pilothouse side windows. Two fixed pilothouse aft windows. Four sliding salon windows and one tilt salon aft window.* Windows were sized to fit the existing interior trim. Cost was a little under $8000 for the windows and shipping. Buying them was the easy part.

I also added two hatches to the pilothouse roof for additional ventilation.

Here's a couple more pictures.

Larry M 06-23-2011 06:21 AM

Before and After
 
Chip: She looks great! Well done.*

Who's and what size hatches did you install in the PH?* We are thinking about adding 2 small hatches*over our berth.* The PO put deck prisms in to let more light.*

Also what did you do for non-skid?*


-- Edited by Larry M on Thursday 23rd of June 2011 06:22:25 AM

Anode 06-23-2011 06:48 AM

RE: Before and After
 
1 Attachment(s)
The hatches are Bomar and are approximately 10"x10". I bought the pair, new in the box on Ebay for $80.

I sanded*off all of the original non-skid. It was on the salon and ph roofs. I reglassed all of these areas and sanded smooth. The ph roof was left smooth as non-skid is hard to keep clean and I didn't need up there anyway on a routine basis.

I used Interlux Perfection on the boat and added their Intergrip to the paint for the non-skid on the Salon roof. All the original teak decks are gone and decks reglassed. The non-skid on the decks is also the Intergrip/Perfection.

Here's a shot of the non-skid.

healhustler 06-23-2011 07:17 AM

RE: Before and After
 
Wow, Chip. That is impressive work, Can't be a cleaner tug around than that one.

Tom.B 06-23-2011 07:39 AM

RE: Before and After
 
Quote:

healhustler wrote:
Wow, Chip. That is impressive work, Can't be a cleaner tug around than that one.
*That's 'cause it ain't in da' wadda! ;-)

Besslb 06-23-2011 10:12 AM

RE: Before and After
 
Tell us about the reglassing part!!*

skipperdude 06-23-2011 03:20 PM

RE: Before and After
 
Must be nice having*her home where you can wwork on her.* And covered to boot.

That is the thing about boats. A good hull and motor and you can make them as good as new or better as in your case.

SD

Anode 06-28-2011 03:43 PM

RE: Before and After
 
Bess - the reglassing part - sand, fill, sand, fare (fair), sand, fare (fair), sand, sand some more, lay glass mat, wet out matt, sand, wet matt, sand, fare, sand, prime, sand, prime, sand, paint, sand, paint, sand, paint, drink a bottle of wine and enjoy.


All times are GMT -5. The time now is 02:56 PM.

Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2006 - 2012