Trawler Forum

Trawler Forum (http://www.trawlerforum.com/forums/)
-   General Classifieds (no boats) (http://www.trawlerforum.com/forums/s68/)
-   -   For Sale: props 4 sale (http://www.trawlerforum.com/forums/s68/props-4-sale-26792.html)

ocean 06-21-2016 09:59 PM

props 4 sale
 
1 Attachment(s)
I have a pair of bronze props in new condition D25 P16 see photo.
Does any member have an idea on there value?

ocean 07-12-2016 10:02 PM

props
 
The props were spares off my 38 Aft cabin Ocean Alexander trawler The vessel is the one in the photo. Open to offers

Daddyo 07-13-2016 07:53 AM

You'll need to post shaft size as well.

Joint Effort 07-13-2016 10:31 AM

I'm in the market for a reverse rotation. Shafts size?

ocean 07-16-2016 01:59 PM

the diameter of the shaft is .45 mm I hope this helps
Bert

ocean 09-06-2016 08:56 AM

props for sale
 
I had these props tuned and reconditioned at a cost of over $600.00.they were spares off a 38 Aft cabin Ocean Alexander I would like to recover my cost. I will sell them for $600.00 + shipping
Bert Ph. 416 431 4493

PMF1984 09-10-2016 01:39 PM

The size should be stamped on the prop ( for example 22 x19)

ocean 09-10-2016 02:11 PM

props for sale
 
Thanks PMF1984 the prop size is 25x16

Xsbank 09-10-2016 03:31 PM

.45 mm is tiny, like the diameter of a toothpick. Better look again?

roguewave 09-11-2016 07:59 AM

Where do you live?

ocean 09-12-2016 09:47 AM

I am in Toronto On Canada

ocean 10-20-2016 10:36 AM

they are still available

ocean 07-08-2017 12:32 PM

props for sale
 
the props are still available for sale All offers considered
Bert bmeadley@gmail.com

ocean 09-10-2018 01:28 PM

props 4 sale
 
The 2 props are still available ,they were spares off my 38 Ft Ocean Alexander Aft cabin powered with twin 135 Ford Lehmans The props are in excellent condition
$500.00 each
Bert Ph 416 4314493
Email bmeadley@gmail.com

ocean 09-10-2018 01:40 PM

props 4 sale
 
The props can be seen in
Florida during the winter
Toronto Can. during the summer

alfamike 09-14-2018 09:00 PM

Propellers - sizing
 
You don't mix metric & SAE English measurement together on same propeller. :nonono:

Swing or Diameter is usually measured in inches - so about D= 25"

Pitch is also usually measured in inches -- so about P=16"

Shaft Diameter is usually measure in inches for us down here in the states.

Guessing if it is around 45 mm - then that converts to approximately
shaft Dia. - 1&3/4".

Next very important detail is direction of rotation for forward movement of boat !

I see one is a LH rotation & one is a RH rotation.

it is very important to mention that. :eek:

So as I see it you have a 26-RH-16 & a 25-LH-16 & both are about 1&3/4 inch shaft sizing.

They look in good shape. IMHO - Pricing seems fair to generous to me.


Good luck with the sale.

Alfa Mike :thumb:

kapnd 09-17-2018 02:06 AM

Quote:

Originally Posted by ocean (Post 697395)
The props can be seen in
Florida during the winter
Toronto Can. during the summer

When do you expect to be in Florida, and where?

ocean 09-17-2018 10:06 AM

Quote:

Originally Posted by kapnd (Post 699233)
When do you expect to be in Florida, and where?

I hope to be in Fort Pierce Florida the 1st of Dec,this depends on some medical issues My cell Ph. # 431 4493 bmeadley@gmail.com

ocean 10-18-2018 10:00 AM

The Props are still available. confirming the size as
swing [Dia] =D25"
pitch = 16"
shaft = 1& l3/4"
1 left hand
1 right hand
open to offers
Bert 416 431 4493 bmeadley@gmail.com

ocean 10-30-2018 09:47 AM

I will be in Fort Pierce Florida from Nov.18 till April 2019 If anyone is interested in buying the propellers I will bring them to Florida.
bmeadley@gmail.com Ph. 416 431 4493


All times are GMT -5. The time now is 11:25 AM.

Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2006 - 2012