Bendit
Senior Member
- Joined
- Nov 25, 2007
- Messages
- 323
- Location
- New Zealand
- Vessel Name
- Pioneer
- Vessel Make
- Westcoaster 53 converted to pleasure
We have an old Lectrasan EC model running on 24V. A couple of years ago I replaced the anodes (more $$$ that a whole new 12V system!) and it generally works very well.
The flush cycle duration (electric toilet, single button operation) is inconsistent. Sometimes it runs for too long. This means that some untreated sewage is pushed into the second chamber or possibly, even over the side. Othertimes the flush cycle is too short, which doesn't really matter since it still empties the bowl.
I have looked at the circuit diagram but can't figure out how to set this parameter. The batteries are always in a good state of charge > 75%
Any ideas please?
Jeff* b
The flush cycle duration (electric toilet, single button operation) is inconsistent. Sometimes it runs for too long. This means that some untreated sewage is pushed into the second chamber or possibly, even over the side. Othertimes the flush cycle is too short, which doesn't really matter since it still empties the bowl.
I have looked at the circuit diagram but can't figure out how to set this parameter. The batteries are always in a good state of charge > 75%
Any ideas please?
Jeff* b
