Trawler Forum

Trawler Forum (http://www.trawlerforum.com/forums/)
-   Power Systems (http://www.trawlerforum.com/forums/s6/)
-   -   Need Ford Lehman Injector line clamps (http://www.trawlerforum.com/forums/s6/need-ford-lehman-injector-line-clamps-23045.html)

Tator 10-30-2015 02:08 PM

Need Ford Lehman Injector line clamps
 
I'm missing four injector line clamps on my Ford Lehman. Although I've put 2k hours on the engines (3k total) without them, I thought I should replace them. I've contacted American Diesel and Bomac to no avail. I could possibly make some new ones, but I'm thinking that the tolerances needed might be beyond my shop capabilities. Any ideas on where else I might try to get some replacements.

Thanks, Tator

Ski in NC 10-30-2015 02:22 PM

You mean the vibration dampers for fuel lines? If so, you could get some from a Kubota or VW. Maybe a tractor shop or injection shop.

Larry H 10-30-2015 04:09 PM

HI,

I would try contacting:

Harbor Marine
1032 W Marine View Dr
Everett, WA 98201
425-259-3285

Ask for Mike in the shop. He might have the clamps. They rebuild Ford Lehmans.

River Cruiser 10-30-2015 09:59 PM

Cat dealer will have them in stock, get the metal parts the rubber cushions and screws and you should be good to go.


Sent from my iPad using Trawler Forum

Tator 10-31-2015 10:25 AM

Quote:

Originally Posted by River Cruiser (Post 384115)
Cat dealer will have them in stock, get the metal parts the rubber cushions and screws and you should be good to go.


Sent from my iPad using Trawler Forum

Not sure if the clamps are generic enough to be provided by other dealers. The clamps I'm replacing are machined metal with exact spacing between the lines. I will call the place in Everett on Monday.
Tator

River Cruiser 11-01-2015 01:41 PM

The ones Cat uses can most likely be adapted to your engine, I suggested Cat because they would have them in stock and you could look at them before buying to decide if they would work for your application.


Sent from my iPad using Trawler Forum


All times are GMT -5. The time now is 01:32 PM.

Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2006 - 2012